
R
Depending on the equipment, the maximum
set speed for cruise control, limiter and Active
Distance Assist DISTRONIC can be limited to
th e maximum electrically drivable speed
R Activation of the combustion engine via the
pressure point of the accelerator pedal (kic k-
down)
Ï Battery Level (plug-inhybrid)
R Prioritised maintenance of the state of charge
of the high-voltage batter y,e.g. for subse-
qu ent journe ysinthe inner city/low emission
zones
R The selection of the matching drive type by
th ehy brid system depends on the driving con-
ditions and the distance
; Eco
R Only available forve hicles with automatic
transmission
R Particular lyeconomical driving
R Balance between traction and stability
R Recommended for all road conditions R
Full de velopment of all intelligent hybrid func-
tions and adap tation of the coasting charac-
te ristics of theve hicle totra1c (plug-in hybrid)
R The selection of the matching drive type by
th ehy brid system depends on the driving con-
ditions and the distance (plug-in hybrid)
% Depending on the situation, the cylinder can
be brie0y deactivated in the drive pro-
gr ams ; andA, depending on the
engine.
% The ESP ®
settings in the drive prog rams ;
and A are designed for stability. Therefore,
ch oose one of these driving prog rams, espe-
cially when transporting roof loads, in trailer
operation and when theve hicle is fully loaded
or fully occupied.
Depending on the drive prog ram, thefo llowing
systems change their characteristics:
R Drive
- engine and transmission management
- Active Distance Assist DISTRONIC
R ESP ® R
V
V ehicles wit
ehicles wit h adap
h adaptiv
tive dam
e dam ping adjus
ping adjustment tment:
:
suspension
R electric po wer steering Selects t
Selects t
he dr
he driv
ive pr
e pr ogr
ogram
am %
Depending on the equipment, theve hicle is
/tted with either a switch or a but ton. Driving and parking
179
179

#
Ongradients, turn the front wheels so that the
ve hicle will rollto wa rdsth eke rb if it starts
moving. #
Apply the electric parking brake. #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: Engage
/rst 1orreve rsege ar k. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: Engage
transmission position jin a stationary vehi-
cle with the brake pedal applied
(/ page 184). #
Switch o. theve hicle bypressing the1 but-
to n. #
Release the service brake slo wly. #
Get out of theve hicle and lock it.
% When you park theve hicle, you can still oper-
ate the side windo wsand the panoramic slid-
ing sunroof for appr oximately four minutes if
th e driver's door is closed. Gar
Gar
ag
age door opener
e door opener Pr
Pr
ogr
ogr amming butt
amming butt ons f
ons for t
or the g
he g ar
arag
ag e door opener
e door opener &
D
DAN
AN GER
GER Risk of fatal injuries caused by
ex haust gases
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Inhaling
th ese exhaust gases is hazardous tohealth
and leads topoisoning. #
Never lea vetheve hicle or, if present, the
stationa ryheater running in an enclosed
space without su1cient ventilation. &
W
WARNI NG
ARNI NGRisk of injury bybecoming
trapped when opening and closing a
ga rage door
When you operate or prog ram a garage door
with an integ ratedga rage door opener, per-
sons can become trapped or struck bythe
ga rage door if they stand wi thin its range of
mo vement. #
Always make sure that nobody is within
th era nge of thega rage door's mo ve-
ment. Before prog
ramming thega rage door opener, park
th eve hicle outside thega rage . Make sure that the
ve hicle is switched on but not star ted.
R
R eq eq uir
uir ements:
ements:
R The vehicle has been par ked outside the
gar age or outside thera nge of mo vement of
th e door.
R The vehicle is switched on.
R The vehicle has not been star ted.
% The garage door opener function is alw ays
av ailable when theve hicle is switched on. Driving and parking
213
213

neck or, in
the case of a fully electric
trailer hitch, retract the ball nec k. Depending on
the bicycle rack 's design, up to
th re e bicycles can be transpor ted on the bicycle
ra ck.
When mounted byattaching toball head 1,the
maximum load capacity is 75 kg. The maximum load capacity is calculated from
the
we ight of the bicycle rack and the bicycle rack
load.
Obser vethe no tes on driving with a roof load,
trailer or fully laden vehicle (/ page 169).
When using a bicycle rack , set the tyre pressure
fo r increased load on there ar axle of theve hicle.
Fu rther information on the tyre pressure can be
fo und in the tyre pressure table (/ page 370).
N
No ot tes on loading
es on loading
The lar gerth e distance between the load's centre
of grav ity and the ball head, thegr eater the load
on the trailer hitch.
Therefore, obser vethefo llowing no tes:
R mount heavy bicycles as close totheve hicle
as possible
R always distribute the load on the bicycle rack
as evenly as possible across theve hicle's lon-
gitudinal axis
Mercedes-Benz recommends removing all de tach-
able parts from bicycles (e.g. bask ets, ch ild seats,
re ch arge able batteries) before loading them onto
th e bicycle rack . This will impr ovethe aerody- namic
resis tance and centre of grav ity of the bicy-
cle rack.
Alw ays secure the bicycles toprev ent them from
moving around and check them at regular inter-
va ls to ensure that they are secure.
Do not use tarp aulins or other co vers. The driving
ch aracteristics and rear view may be impaired. In
addition, aerodynamic resis tance and the load on
th e trailer hitch will increase. Load distribution on
the bicycle rack
1 Vertical distance between centre of grav ity
and ball head Driving and parking
275
275

P
P
ar
ar king ser
king ser vice
vice
* NO
NOTE
TEDamage totheve hicle due tonot
observing the maximum permitted head-
ro om clearance If
th eve hicle height is greater than the maxi-
mum permitted headroom clearance, thero of
and other parts of theve hicle may be dam-
aged. #
Obser vethe signposted headroom clear-
ance. #
Ifth eve hicle height is greater than the
permitted headroom clearance, do not
enter. #
Obser vethech anged vehicle height with
add-on roof equipment. *
N
NOOTE
TE Before selecting the parking option The data is based on information provided
by
th ere specti veservice pr ovider.
Mercedes Benz accepts no liability forthe
accuracy of the information pr ovided relating
to the multi-s tore y car park/parking area. #
Alwa ys obser vethe local Information and
conditions. %
This service is not available in all countries. #
Select Zand activate Parking. #
Tap on jinthe map. #
Select a parking option.
The map sho ws the parking options in the
vicinity.
The following information is displa yed (if avail-
able):
R Destination address, dis tance from cur rent
ve hicle position and ar riva l time
R Information on the multi-s tore y car
park/car par k,forex ample:
- Opening times
- Parking charges
- Current occupancy
- Maximum parking time
- Maximum access height Maximum access height
The maximum access height sh ownby
th e parking service does not replace th
e need for obser vation of the actual
circumstances.
R Available payment options (Mercedes pa y,
coins, bank no tes, cards)
R Details on parking tari.s
R Number of available parking spaces
R Payment me thod (e.g. at the parking
me ter)
R Services/facilities at the parking option
R Telephone number #
Calculate thero ute (/ page 303). N
No
ot
tes on t
es on t he dashcam
he dashcam *
N
NOOTE
TE Before using the dashcam Yo
u are legally responsible for operation and
use of the dashcam functions. The legal
re qu irements relating tooperation and use of
th e dashcam can vary depending on the coun-
try in which the dashcam is operated. There-
fo re , obser vethe legal requ irements, in partic- 306
306
MBUX multimedia system

*
N
NO
OTE
TE Damage from automatic braking If one of
thefo llowing functions is switched
on, theve hicle brakes automatically in cer tain
situations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avoid damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
during towing #
in a car wash *
N
NOOTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. #
Ensu rethere is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation/heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y. R
In automatic car washes with con veyo r sys-
te ms:
- Neutral iis engaged.
- V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: If
yo uwo uld like tolea vetheve hicle while it
is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise.
A
A ut
ut omatic car w
omatic car w ash mode
ash mode
In car wash mode, theve hicle is prepared for driv-
ing into the automatic car wash. Car wash mode
can be activated at a speed of up to20 km/h
Ac tivate (/ page 339).
The following settings are made when car wash
mode is activated:
R The outside mir rors are folded in.
R Topreve ntthe windscreen washer system
from starting up automaticall y,thera in sensor
is deactivated.
R The rear wind owwiper is deacti vated. 338
338
Maintenance and care

R
The wind ows and the sliding sunroof are
closed.
R The air conditioning system is set toair-recir-
culation mode.
R Parking Assist PARKTRONIC is deactivated.
R V
Vehicles wit
ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
activated aTer appr ox. eight seconds.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
Ab ove a speed of 20 km/h Car wash mode is
automatically deacti vated.
The following settings are reset when car wash
mode is deacti vated:
R The outside mir rors are folded out.
R The rain sensor is activated.
R The rear wind owwiper is activated.
R The air conditioning system is set tofresh air
mode.
R Parking Assist PARKTRONIC is reset tothe
pr ev iously selected setting. R
The windo wsand the sliding sunroof remain
closed.
R V
V ehicles wit ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
deactivated at speeds abo ve18 km/h. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating aut
ating automatic car w
omatic car w ash mode
ash mode R
R
eq
eq uir
uir ements:
ements:
R theve hicle is stationar y.
R the engine is running.
Multimedia system: 4 © 5
Settings 5
Quick access
A
A ctiv
ctiv ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Car wash mode . #
Select Start.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
% For an overview of the settings made when
activating automatic car wash mode
(/ page 337). Deactiv Deactiv
ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Stop.
The automatic car wash settings are reset.
% The automatic car wash mode is automatically
deacti vated as soon as a speed of 20 km/h is
ex ceeded. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W WARNING ARNING Risk of an accident when using
high-pressure cleane rswith round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. Maintenance and ca
re
339 339

*
N
NO
OTE
TE Inva lidation of the operating permit
due tofailure tocomply with the inst ruc-
tions for installation and use The operating permit may be in
validated if the
inst ructions for installation and use of two-w ay
ra dios are not obser ved. #
Only use appr oved frequency bands. #
Obser vethe maximum permissible out-
put po wer in these frequency bands. #
Only use appr oved aerial positions. 1
Front roof area
2 Rear roof area
3 Rear wings
On vehicles with a panoramic sliding sunroof, /t-
ting an aerial tothe front or rear roof area is not
permitted. On
there ar wings, it is recommended that you /t
th e aerial on the side of theve hicle closest tothe
cent reofthero ad.
Use Tech nical Speci/cation ISO/TS 21609 (Road
Ve hicles – "EMCs for installation of aTermar ket
ra dio frequency transmitting equipment") when
re tro/tting two- wayra dios. Comply with the legal
re qu irements for de tach able parts.
If yo ur vehicle has /ttings for two-w ayradio equip-
ment, use the po wer supply and aerial connectors
pr ov ided in the pre-ins tallation. Obser vethe man-
ufacturer's supplements when /tting.
T
T w
w o-wa
o-wa y r
y radio tr
adio tr ansmission output
ansmission output
The maximum transmission output (PEAK) at the
base of the aerial must not exceed theva lues in
th efo llowing table. 390
390
Te
ch nical data

V
V
ehicle dimensions (plug-in h
ehicle dimensions (plug-in h ybr
ybrid)
id) A 250 e
A 250 e
Ve
hicle lengt h4 419 mm
Ve hicle width including outside
mir rors 1992 mm
Ve hicle width excluding out-
side mir rors 1796 mm
Ve hicle height 1452 mm
Wheelbase 2729 mmW W
eights and loads
eights and loads Please obser
vethefo llowing no tesfo rth e speci-
/ed vehicle data:
R Items of optional equipment increase the unla-
den weight and reduce the pa yload.
R Vehicle-speci/c weight information can be
fo und on theve hicle identi/cation plate
(/ page 392). R
R oof load
oof load Model
Model
Maximum r
Maximum roof load
oof load
All model s7 5 kg High-v
High-v
olt
oltag
age batt
e batt er
ery (plug-in h
y (plug-in h ybr
ybrid)
id) N
No
ot
tes on t
es on t he pow
he pow er suppl
er suppl y f
y f or v
or v ehicles wit
ehicles wit h a
h a
high-v
high-v olt
oltag
age batt
e batt ery
ery
In accordance with European standard
EN 17186:2019 vehicle identi/ers are located on
th eve hicle in thefo llowing places:
R Onthe inside of the soc ket 0ap
R Onthech arging cable connector
In addition, charging stations in European coun-
tries are equipped with ene rgy supp lyidenti/ers.
Yo u can rech arge your vehicle at charging stations
where thech arging station identi/er cor responds
to theve hicle identi/er.
Fo r fur ther information on charging the high-volt-
age batter y,referto the "Charging the high-volt-
age battery" section (/ page 194). 1
Supply type: AC
St andard: EN 62196-2
St yle: type 2
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 480 V RMS
2 Supply type: DC
Standard: EN 62196-3
St yle: FF
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 50 V to500 V
3 Supply type: DC 404 404
Te
ch nical data