2021 MERCEDES-BENZ A-CLASS HATCHBACK heating

Seat belts
Seat belts
R Clean wi thluk ewa rmand soapy water.
R Do not use chemical cleaning agents.
R Do not dry byheating them toove r 80°C or
ex posing them todirect sunlight.
Display
Display
R Switch o. the display and let it cool down.
R Clean the sur face carefully with a micro/bre
clo thand a suitable displ aycare product (TFT-
LC D).
R Do not use any other agents.
Head-up displ ay
Head-up display
R Clean with a soT, non-static, lint-free clo th.
R Do not use cleaning agents.
Plas
Plastic tr tic tr im
im
R Clean with a damp micro/bre clo th.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. R
Do not allow cosmetics, insect repellent or
sun cream tocome in contact with the plastic
trim.
R
R eal w
eal w ood and tr
ood and tr im elements
im elements
R Clean with a micro/bre clo th.
R Blackpiano-lacquer look: Clean with a damp
clo thand soapy water.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Do not use sol vent-based cleaning agents, pol-
ishes or waxes.
R
R oof lining
oof lining
R Clean with a brush or dry shampoo.
Car
Car pet
pet
R Use a carpet and textile cleaning agent recom-
mended for Mercedes-Benz.
St
St eer
eer ing wheel made of g
ing wheel made of g enuine leat
enuine leather or DINA-
her or DINA-
MICA
MICA
* NO
NOTE
TEDamage caused bywrong cleaners #
Do not use sol vent-based cleaning
agents such as tarre mo ver or wheel cleaner; neither should
you use polishes
or wa xes. Otherwise you may damage
th e /nish. R
Clean with a damp clo thand 1% soapy water
solution and then wipe with a dry clo th.
R For heavy soiling: Use a cleaner recommen-
ded for Mercedes-Benz.
R Leather care: Use a leather care agent that
has been recommended for Mercedes-Benz.
R Do not allow the leather tobecome too damp.
R Do not use a micro/bre clo th.
% Leather is a natural product. It has natural
surface properties, such as di.erences in
st ru cture, mar kscaused bygrow thand injury
or subtle colour di.erences. These sur face
properties are characteristics of leather and
not material faults. What's more, leather is
subject toa natural ageing process during
which the sur face properties change.
Genuine leat
Genuine leat her seat cov
her seat cov ers ers
R Clean with a damp clo thand then wipe with a
dry clo th. 344
344
Maintenance and care

with
your skin, eyes or clo thing, and do not
swallow it. Do not inhale any vapours. Keep
th e tyre sealant away from children.
Obser vethefo llowing if you come into contact
with the tyre sealant: #
Rinse o. the tyre sealant from your skin
using water immediatel y. #
If tyre sealant gets into your eyes, thor-
oughly rinse them using clean water
immediatel y. #
If tyre sealant has been swallo wed,thor-
oughly rinse out your mouth immediately
and drink plenty of water. Do not induce
vo miting and seek medical attention
immediatel y. #
Change out of clo thing which has come
into contact with tyre sealant immedi-
atel y. #
If an alle rgic reaction occurs, seek medi-
cal attention immediatel y. *
N NO
OTE
TE Overheating due tothe tyre in0ation
compressor running too long #
Do not runth e tyre in0ation compressor
fo r longer than ten minutes without inter-
ru ption. Comply with
the manufacturer's saf ety no tes on
th e stic ker on the tyre in0ation compressor.
Ha ve the tyre sealant bottle replaced in a quali/ed
specialist workshop every /ve years. #
Do not remo veany fore ign objects which ha ve
entered the tyre. #
A1x part 1ofthe TIREFIT stic kerto the
inst rument cluster within the driver's /eld of
vision. #
A1x part 2ofthe TIREFIT stic ker near the
va lve on the wheel with the defective tyre. #
Pull plug 4with the cable and hose 5out
of the tyre in0ation compressor housing. Breakdown assistance
351
351

In0ating
In0ating
t
t he emerg
he emerg ency spar
ency spar e wheel
e wheel *
N
NOOTE
TE Overheating due tothe tyre in0ation
compressor running too long #
Do not runth e tyre in0ation compressor
fo r longer than ten minutes without inter-
ru ption. R
R
eq
eq uir
uir ements:
ements:
The emer gency spa rewheel has been /tted cor-
re ctl y. ( / page 378)
Comply with the manufacturer's saf ety no tes on
th e stic ker of the emer gency spa rewheel and on
th e tyre in0ation compressor. #
Remo vethe stic ker with the label 80 km/h
from the tyre in0ation compressor housing
and a1x it tothe inst rument cluster within the
driver's /eld of vision. #
Remo vethe tyre in0ation compressor from the
st ow age space under the luggage compart-
ment 0oor . (/ page 350, 349) #
Pull /ller hose 1and plug 3out of the tyre
in0ation compressor housing. #
Insert plug 7of /ller hose 1inthe soc ket
on the tyre in0ation compressor and then turn
it until plug 7engages. #
Unscr ewthe cap from theva lve on the emer-
ge ncy spa rewheel. #
Screw union nut 2of /ller hose 1onto the
va lve. #
Make sure on and o. switch 4ofthe tyre
in0ation compressor is set to 00. #
Insert plug 3in a soc ket in your vehicle.
R Cigar ette lighter soc ket R
12 V soc ket: ( / page 128)
R Obser vethe no tes on the cigar ette lighter in
th e Digital Owner's Manual
R Obser vethe no tes on soc kets: (/ page 128) #
Press the start/s top button once toswitch on
th e po wer supply (/ page 165). #
Press on and o. switch 4onthe tyre in0a-
tion compressor to II.
The tyre in0a tion compressor is switched on.
The tyre is in0ated. The tyre pressure appears
on manom eter 5. #
Pump the tyre tothe speci/ed tyre pressure.
% The speci/ed tyre pressure is stated on the
label of the emer gency spa rewheel. #
When the speci/ed tyre pressure has been
re ached, press on and o. switch 4onthe
tyre in0ation compressor to 00.
The tyre in0a tion compressor is switched o.. #
Press the start/s top button toswitch o. the
po we r suppl y. #
Ifth e tyre pressure is higher than the speci/ed
pressure, press pressure release valve button Wheels and tyres
385
385

V
V
ehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: if a collapsible spare wheel is /t tedthe
tyre pressure monitoring system cannot func-
tion reliabl y.Fo r a few minutes aTer an emer-
ge ncy spa rewheel is /tted, the system may
still display the tyre pressure of there mo ved
wheel. Only restart the system again when the
collapsible spare wheel has been replaced
with a new wheel.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 369)
R Tyre pressure table (/ page 370) In0ating
In0ating
t
the collapsible spar
he collapsible spar e wheel
e wheel R
R
eq
eq uir
uir ements:
ements:
R Mount the collapsible spare wheel as descri-
bed (/ page 382).
R Remo vethe tyre in0ation compressor from the
st ow age space under the load compartment
0oor (/ page 350, 349). *
N
NOOTE
TE Damage tothe emer gency spa re
wheel when lo wering theve hicle Lo
we ring theve hicle without pr eviously in0at-
ing the emer gency collapsible spa rewheel can
damage its rim. #
In0a tethe emer gency collapsible spa re
wheel using the tyre in0ation compressor
before lo wering theve hicle. *
N
NOOTE
TE Overheating due tothe tyre in0ation
compressor running too long #
Do not runth e tyre in0ation compressor
fo r longer than ten minutes without inter-
ru ption. #
Pull connector 4and the hose out of the
housing. #
Unscr ewthe cap from theva lve on the col-
lapsible spare wheel. #
Screw union nut 1ofthe hose onto the
va lve.
% Make sure on and o. switch 3ofthe tyre
in0ation compressor is set to 00. #
Insert plug 4into the cigar ette lighter soc ket
or into a 12 V soc ket (/ page 128) in your
ve hicle. #
Switch on the po wer supply (/ page 165). Wheels and tyres
387
387

#
Only refuel using diesel fuel wi tha sul-
phur content less than 500 ppm.
Ne verre fuel wi thone of thefo llowing fuels:
R Petrol
R Marine diesel
R Heating oil
R Pure fatty acid me thyl ester or veget able
oil
R Para1n or kerosene
If yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indication for fuel
applies toyour vehicle: 1
For diesel fuel with a maximum of 7% byvol-
ume bio-diesel (fatty acid me thyl ester)
Ac cording toEuropean standard EN 16942 you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label in the
fuel /ller 0ap (/ page 188)
R Onthe fuel dispenser or pump nozzle suitable
fo ryo ur vehicle thro ughout Europe
Inf Inf or
ormation on lo
mation on lo w outside t
w outside tem
emper
per atur
atur es
es
Re fuel your vehicle with as much winter diesel fuel
as possible at the beginning of winter. Before
changing overto winter diesel fuel, the fuel
ta nk should be em pty, if possible. When /rst refu-
elling wi thwinter diesel fuel, keep the fuel le vel
lo w, e.g. toreser veleve l. The fuel tank can be /l-
led as usual when next refuelling.
Fu rther information on fuel can be obtained at a
/lling station or a quali/ed specialist workshop.
T
T ank cont
ank cont ent and fuel r
ent and fuel r eserve
eser ve
No
No t f
t for plug-in h
or plug-in h ybr
ybrid:
id:
The tota l capacity of the fuel tank may vary,
depending on theve hicle equipment. Te
ch nical data
397
397

-
Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N
NOOTE
TE Overheating at high outside tempe r-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C) R
A maximum of 55% (antif reeze pr otection
down to-45°C) N
No ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 393). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. 402
402
Te
ch nical data

V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Initiate a new swivel mo vement (/ page 271). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. Display messages and
warning/indicator lamps
429
429

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Depress the brake pedal. #
Engage park position j. #
Consult a quali/ed specialist workshop.
Transmission Malfunction *The transmission is malfunctioning. The cause could be an overheated clutch or bloc kedge ars. #
Let the transmission cool down. #
Ifth e display message still appears following a restart, consult a quali/ed specialist workshop.
d Trans. oil overheated Drive
on with care *T
he transmission is overheating. When the display message is active, start-up and driving characteristics may be tem-
porarily impaired. #
Drive at low engine speed. #
Avoid sporty driving. #
Before pulling away on uphill gradients, let the transmission cool down until the display message disappears.
Parking lock inoperative
Apply the parking brake *T
he transmission is malfunctioning. The park position jcann otbe selected. #
Park theve hicle safel y. #
Use the electric parking brake tosecure theve hicle against rollingaway.
Teaching in transmission
Operate selector lever
Brake for XX seconds Risk
of vehicle rolling *T
he transmission is being taught in. There is a risk of theve hicle rolling away. #
Depress and hold the brake pedal until thete ach-in process has been comple ted.
The electric parking brake is applied automatically during thete ach-in process. #
Switch on theve hicle. 440 440
Displ
aymessages and warning/indicator lamps