2021 MAZDA MODEL CX-3 instrument cluster

SignalWarning
(Amber)
Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
Warning Light
*
The warning light turns on if there is a malf unction in the system while the Mazda Radar
Cruise Control with Stop & Go function (MRCC with Stop & Go function) system is on.
Have your vehicle inspected at an Authorized Mazda Dealer.
Blind Spot Monitor ‐
ing (BSM) OFF In ‐
dicator Light
*
A problem in the system may be indicated under the following conditions.
Have your vehicle inspected at an Authorized Mazda Dealer.
The light does not turn on when the ignition is switched ON.The light remains on even wh en the Blind Spot Monitoring (BSM) system can be oper ‐
ated.
The light turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors
can detect, the system may pause (The Blin d Spot Monitoring (BSM) OFF indicator light
in the instrument cluster illuminates). However, it does not indicate a malfunction.
LED Headlight
Warning Light*
This light illuminates if ther e is a malfunction in the LED headlight. Have your vehicle
inspected by an Authorized Mazda Dealer.
▼ Taking Action
Take the appropriate action and verify that the warning light turns off.
Signal
Warning Action to be taken
Low Fuel Warning
Light The light turns on wh
en the remaining fuel
is about 9.0 L (2.3 US gal, 1.9 Imp gal).
NOTE
The light illumination timing may vary be‐
cause fuel inside the fuel tank moves around
according to the driving conditions and the
vehicle posture. Add fuel.
Check Fuel Cap Warn
‐
ing Light If the check fuel cap warning light illumi‐
nates while driving, the fuel-filler cap may
not be installed properly.
Stop the engine and re
install the fuel-filler
cap.
Refer to Refueling on page 3-26.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-33
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

flashes and the buzzer operates at the same
time.
Refer to Stop Vehicle in Safe Place
Immediately on page 7-26.
▼Blind Spot Monitoring (BSM)
Warning Beep*
Driving forward
The warning beep operates when the turn
signal lever is operated to the side where
the Blind Spot Moni
toring (BSM) warning
light is illuminated.
NOTE
A personalized function is available to
change the Blind Spot Monitoring (BSM)
warning beep sound volume.
Refer to Personalization Features on page
9-9.
Reversing
The Blind Spot Monitoring (BSM)
warning sound is activated if there is a
possibility of collision with a vehicle
approaching from behind and from the
rear on the left and right sides of the
vehicle.
▼ Lane Departure Warning Sound*
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
The volume of the LDWS warning sound
can be changed.
Refer to Personalization Features on
page 9-9.
The type of the LDWS warning sound
can be changed.
Refer to Personalization Features on
page 9-9.
▼Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
War ni ng s
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system
warnings notify the
driver of system malfunctions and
cautions on use when required.
Check based on the beep sound.
Warning beep What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func ‐
tion) is operating The Mazda Radar Cruise
Control with Stop & Go
function (MRCC with
Stop & Go function) sys
‐
tem has been canceled.
The beep continues to
sound while the vehicle
is being driven. The distance between
your vehicle and the ve‐
hicle ahead is too close.
Verify the safety of the
surrounding area and re
‐
duce vehicle speed.
When the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func ‐
tion) is operating, the
beep sounds and the
Mazda Radar Cruise
Control with Stop & Go
function (MRCC with
Stop & Go function)
warning light (amber) in
the instrument cluster
turns on. A malfunction in the
system may be indicated.
Have your vehicle in‐
spected at an Authorized
Mazda Dealer.
▼
Excessive Speed Warning*
If the vehicle speed exceeds the speed
limit sign displayed on the active driving
display, the warning sound is activated and
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-45
CX-3_8JL1-EA-20G_Edition1_old
2020-5-22 15:31:00

Index
Coming home light......................4-44
Control......................................... 4-40
Flashing....................................... 4-44
High-low beam............................ 4-44
Leaving home light..................... 4-45
Leveling....................................... 4-45
Head Restraint................................... 2-17
High Beam Control System
(HBC)................................................ 4-79
Hill Launch Assist (H LA)................ 4-63
Hood Release.................................... 6-19
Horn...................................................4-53
I
If a Warning Light Turns On or
Flashes............................................... 7-26
If the Active Driving Display does not
operate............................................... 7-48
Ignition Switch............................................ 4-4
Ignition not switched off (STOP)
warning beep..................................... 7-43
Illuminated Entry System............... 5-143
Immobilizer System.......................... 3-36
Indicator Lights................................. 4-23 Low engine coolant
temperature.................................. 4-26
Wrench......................................... 4-25
Inspecting Brake/Clutch Fluid
Level.................................................. 6-27
Inspecting Coolant Leve l.................. 6-25
Inspecting Engine Oil Level............. 6-24
Inspecting Washer Fluid Level......... 6-27
Instrument Cluster... .......................... 4-11
Interior Care...................................... 6-59 Active driving display
maintenance................................. 6-61
Cleaning the floor mats............... 6-61
Cleaning the window interiors.....6-61
Instrument panel top
maintenance................................. 6-60
Leather upholstery
maintenance................................. 6-60
Panel maintenance....................... 6-61
Plastic part maintenance.............. 6-60
Seat belt maintenance..................6-59
Upholstery and synthetic leather
maintenance................................. 6-59
Vinyl upholstery maintenance..... 6-59
Interior Lights................................. 5-142 Luggage Compartment Light.....5-142
Map Lights................................ 5-142
Overhead Lights........................ 5-142
i-ACTIVSENSE................................ 4-75 Active Safety Technology........... 4-75
Adaptive Front Lighting System
(AFS)........................................... 4-78
Advanced Smart City Brake Support
(Advanced SCBS)..................... 4-116
Blind Spot Monitoring (BSM).....4-87
Camera and sensors..................... 4-76
Distance Recognition Support System
(DRSS).........................................4-99
Forward Sensing Camera
(FSC)......................................... 4-126
High Beam Control System
(HBC).......................................... 4-79
Lane Departure Warning System
(LDWS)....................................... 4-82
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)..................4-104
Pre-Crash Safety Technology...... 4-75
Radar Sensors (Rear).................4-134
Radar sensor (front)...................4-131
Rear Cross Traffic Alert
(RCTA)...................................... 4-101
Smart Brake Support (SBS)...... 4-123
Smart City Brake Support
(SCBS)....................................... 4-120
10-5
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00