NOTE
If you elect to perform maintenance yourself or have your vehicle serviced at a location
other than an Authorized Mazda Dealer, Mazda requires that all fluids, parts and materials
must meet Mazda standards for durability and performance as described in this manual.
Claims against the warranty resulting from lack of maintenance, as opposed to defective
materials or authorized Mazda wo rkmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's ori ginal equipment may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using ge nuine Mazda parts.
Selecting “Maintenance Monitor” enables the system to notify yo u of your vehicle's
approaching inspection/servicing period, refer to the Informati on section in the Mazda
Connect Owner's Manual for the details.
The malfunction diagnosis connector is designed exclusively for connecting the specially
designed device to perform on-board diagnosis.
Do not connect any devices other than the specially designed ma lfunction diagnosis devices
for servicing. If any device othe r than the malfunction diagnosis device is connected, it may
affect the vehicle's electrical devices or lead to damage such as battery depletion.
Malfunction
diagnosis
connector
Maintenance and Care
Essential Information
6-3
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
4. Turn off the booster vehicle's engine and connect the jumper cables in the following
order.
Make sure that the jumper cables are securely connected so that they do not disconnect
due to engine vibrations.
1st lead
Positive (+) terminal on the discharged battery
Positive (+) terminal on booster vehicle's battery
2nd lead
Negative (-) terminal on booster vehicle's battery
Location shown in the figure (do not connect to the negative (- ) terminal of the
battery)
Connect cables in numerical order and disconnect in reverse order.
Jumper cables
Booster battery
Discharged battery
5. Start the booster vehicle's engine and rev the engine.
6. Start the engine of your vehicle. Run the engines for about 3 minutes to temporarily
charge the battery of your vehicle.
7. Disconnect the jumper cables in the reverse order of their co nnection.
8. Install the battery cover.
9. Have your vehicle inspected by an Authorized Mazda Dealer as soon as possible.
If Trouble Arises
Battery Runs Out
7-17
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
Index
Power Steering Warning Buzzer....... 7-48
Power Windows................................ 3-34
R
Radar Sensors (Rear)...................... 4-223
Radar Sensor (Front).......................4-220
Rearview Mirror................................3-31
Rear Coat Hooks............................... 5-39
Rear Cross Traffic Alert (RCTA).... 4-146
Rear Door Child Safety Locks.......... 3-17
Rear Seat........................................... 2-15
Rear View Monitor......................... 4-240 Displayable range on the
screen......................................... 4-242
Picture quality adjustment......... 4-247
Rear view monitor operation..... 4-243
Rear view parking camera
location...................................... 4-241
Switching to the rear view monitor
display........................................4-241
Variance between actual road
conditions and displayed
image......................................... 4-246
Viewing the display................... 4-243
Rear Window Defogger.................... 4-89
Recommended Oil.............................6-22
Recording of Vehicle Data................ 8-23
Recreational Towing......................... 3-52
Registering Your Vehicle in A Foreign
Country.............................................. 8-19
Replacement Fuse..............................................6-52
Key battery.................................. 6-41
Light bulbs...................................6-48
Tires............................................. 6-45
Wheel........................................... 6-47
Wiper........................................... 6-35
Request Switch Inoperable Warning
Beep (With the advanced keyless
function)............................................ 7-47
Rocking the Vehicle.......................... 3-46
S
Safety Defects, Reporting................. 8-15
Saving Fuel and Protection of the
Environment...................................... 3-44
Scheduled Maintenance...................... 6-4
Seat Seat position memory.................. 2-11
Seats Front seat....................................... 2-5
Head restraint.............................. 2-17
Rear seat...................................... 2-15
Seat ventilation............................ 2-20
Seat warmer................................. 2-19
Seat Belt System Automatic locking....................... 2-25
Emergency locking...................... 2-25
Extender....................................... 2-29
Pregnant women.......................... 2-25
Seat belt precautions................... 2-23
3-point type................................. 2-26
Seat Belt Warning Beep.................... 7-45
Security System Immobilizer system..................... 3-40
Theft-deterrent system.................3-42
Selective Catalytic Reduction (SCR)
System (SKYACTIV-D 2.2)............4-237
Selective Catalytic Reduction (SCR)
Warning Beep.................................... 7-48
Smart Brake Support (S BS)............ 4-186
Collision warning.... .................. 4-187
Stopping the Smart Brake Support
(SBS) system operation............. 4-187
Smart City Brake Support
(SCBS)............................................ 4-178 Collision warning.... .................. 4-180
Smart City Brake Support (SCBS)
Indicator Light (Red).................4-180
10-8
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
