DESCRIPTIONFUSE
RATING PROTECTED COMPONENT
13 CABIN.+B 50 A For protection of various circuits
14 FAN GE 30 A Cooling fan
*
15 ENG.MAIN 40 A Engine control system
16 ABS/DSC M 50 A ABS, Dynami c stability control system
17 HEATER 40 A Air conditioner
18 WIPER 20 A Front window wiper and washer
19 FAN DE 50 A
Cooling fan
*
20 ADD FAN GE 30 A Cooling fan*
21 ENGINE3 15 A Engine control system
22 ENGINE2 15 A Engine control system
23 AUDIO27.5 A Audio system
24 METER2 10 A ―
25 SRS1 7.5 A Air bag
26 METER1 10 A Instrument cluster
27 ENGINE.IG1 7.5 A Engine control system
28 AT 15 A Transaxle control system, Ignition switch
29 H/CLEAN 20 A ―
30 A/C 7.5 A Air conditioner
31 AT PUMP 15 A ―
32 HORN 15 A Horn
33 R.WIPER 15 A Theft-deterrent system
*
34H/L HI 20 A Headlight high beam
35 ― ― ―
36 WIPER.DEI 20A Windshield wiper de-icer
*
37 ENG.+B7.5 A Engine control system
38 H/L LOW L 15 A Headlight low beam (LH)
39 GLOW SIG 5 A ―
40 ENGINE1
ENGINE4 15 A Engine control system
41 C/U IG1 15 A For protection of various circuits
42 ST.HEATER 15 A Heated steering wheel
*
43― ― ―
44 AUDIO1 25 A Audio system
45 ABS/DSC S 30 A ABS, Dynami c stability control system
46 FUEL PUMP 15 A Fuel system
*
Maintenance and Care
Owner Maintenance
6-56*Some models.
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all
the turn signals will flash. The hazard
warning indicator lights in the instrument
cluster flash simultaneously.
NOTE
The turn signals do not work when the
hazard warning lights are on.
Check local regulations about the use of
hazard warning lights while the vehicle
is being towed to verify that it is not in
violation of the law.
If Trouble Arises
Parking in an Emergency
7-2
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
If a Warning Light Turns On or Flashes
If any warning light turns on/flashes, take appropriate action for each light. There is no
problem if the light turns off, h owever if the light does not turn off or turns on/flashes again,
consult an Authorized Mazda Dealer.
The details for some warnings can be viewed on the center display or multi-information
display (Type A/Type B) in the instrument cluster.
Center display
1. If the warning light is turned on, select the icon on the home screen to display the
Applications screen.
2. Select “Vehicle Status Monitor”.
3. Select “Warning Guidance” to display the current warnings.
4. Select the applicable warni ng to view the warning details.
Multi-information display (Type A/Type B)
1. Press the INFO switch on the s teering switch to display the warning indication screen.
Refer to Multi-information Display (Type A) on page 4-15.
Refer to Multi-information Display (Type B) on page 4-34.
▼ Stop Vehicle in Safe Place Immediately
If any of the following warning
lights turns on, the system may have a malfunction. Stop the
vehicle in a safe place immediately and contact an Authorized M azda Dealer.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-25
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
SignalWarning
Blind Spot Monitor‐
ing (BSM) Warning Indication The Warning indication turns on i
f there is any malfunction in the Blind Spot Monitoring
(BSM). Have your vehicle inspect ed by an Authorized Mazda Deale r.NOTE
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors
can detect, the system may pause. How ever, it does not indicate a malfunction.
Blind Spot Monitor‐
ing (BSM) OFF In‐ dicator Light A problem in the system may be
indicated under the following co nditions.
Have your vehicle inspected at an Authorized Mazda Dealer.
The light does not tur n on when the ignition is switched ON.The light remains on even when the Blind Spot Monitoring (BSM) system can be oper‐
ated.
It turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors
can detect, the system may pause (The Blin d Spot Monitoring (BSM) OFF indicator light
in the instrument cluster illuminates). Ho wever, it does not indicate a malfunction.
(Amber)
Driver Attention
Alert (DAA) Warn‐
ing Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect‐
ed at an Authorized Mazda Dealer.
(Amber)
Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
Warning Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect‐
ed at an Authorized Mazda Dealer.
Lane-keep Assist
System (LAS) & Lane Departure
Wa r n i n g S y s t e m
(LDWS) Warning
Indication
*
The message is displayed when the system has a malfunction. Have your vehicle inspect‐
ed at an Authorized Mazda Dealer.
The system does not operate when the warning message is displayed.
CAUTION
Always use tires for all wheels that are of the specified size, and the same manufacture,
brand, and tread pattern. In addition, do no t use tires with significantly different wear
patterns on the same vehicle. If such improper tires are used, the system may not operate
normally.
When an emergency spare tire is used, the system may not operate normally.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-34*Some models.
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
Message Indicated on Multi-information Display*
If there is a notification from the vehicle, a message is displayed in the multi-information
display. Check the information and take the necessary action.
(Display example) Instrument Cluster
Type A
Type B
If the warning light turns on/fla shes simultaneously or a symbol is indicated in the display,
check the information regarding the warning light or symbol.
Refer to If a Warning Light Turns On or Flashes on page 7-25.
Display Content Action to be taken
Indicated when the push button start is
pressed while the selector lever is not in
the P position. Shift the selector lev
er to the P position.
Indicated when the push button start is
pressed without depressing the brake
pedal. Depress the brake pedal and press the
push button start.
Indicates when the Electric Parking
Brake (EPB) switch is operated without
depressing the brake pedal.Operate the Electric Parking Brake
(EPB) switch while depressing the brake
pedal.
Indicates when there is a problem with
the brake related system while the vehi‐
cle is being held in a stop position by the
AUTOHOLD function or during the
Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go
function) stop hold control.Depress the brake pedal.
Cancel the AUTOHOLD function or the
Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go
function), and have your vehicle inspect‐
ed at an Authorized Mazda Dealer.
Indicates the possibility of the vehicle
not being held in th
e stopped position by
the AUTOHOLD function or the Mazda
Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go func‐
tion) stop hold control, such as on steep
slopes. Depress and hold your foot on the brake
pedal.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-41
Mazda6_8JN3-EA-20H_Edition1_old
2020-6-18 17:31:27
The type of the Lane-keep Assist System
(LAS) & Lane Departure Warning
System (LDWS) warning sound can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
▼Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
Wa r n i n g s
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system w
arnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.
Warning beep What to check
While the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func‐
tion) system is operating,
a single beep sound is
heard when “Front Ra‐
dar Sensor Blocked” is
displayed in the mul‐
ti-information display. Cancel the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func‐
tion) system if the radar
sensor (front) becomes
dirty. Clean the area
around the radar sensor
(front).
The beep sounds inter‐
mittently while the vehi‐
cle is being driven. The distance between
your vehicle and the ve‐
hicle ahead is too close.
Verify the safety of the
surrounding area and re‐
duce vehicle speed.
While the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func‐
tion) system is operating,
a single beep sound is
heard when “ Front Ra‐
dar Sensor System Mal‐
function” is displayed in
the multi-information
display. A malfunction in the
system may be indicated.
Check the center display
to verify the problem
and then have your vehi‐
cle inspected by an Au‐
thorized Mazda Dealer.
▼
Excessive Speed Warning*
If the vehicle speed exceeds the speed
limit sign displayed
on the active driving
display, the warning sound is activated and
the area around the speed limit sign
displayed on the active driving display
flashes 3 times in amber, and if the vehicle
speed continues to exceed the displayed
speed limit sign, the indication stops
flashing and remains on.
▼ Collision warning*
If there is a possibility
of a collision with a
vehicle ahead, a warning sound is
activated at the same time as the warning
indications are displayed in the instrument
cluster or active driving display.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-49
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
Index
Aluminum wheel maintenance.... 6-64
Bright-metal maintenance........... 6-63
Maintaining the finish................. 6-60
Plastic part maintenance.............. 6-64
F
Flasher Hazard warning........................... 4-91
Headlights.................................... 4-78
Flat Tire............................................... 7-3 Mounting the spare tire............... 7-12
Removing a flat tire...................... 7-8
Floor Mat.......................................... 3-45
Fluid Brake............................................6-28
Washer......................................... 6-29
Fluids Classification................................. 9-5
Foot Brake.......................................4-100
Forward Sensing Camera (FSC)..... 4-215
Fuel Filler lid and cap......................... 3-27
Requirements (SKYACTIV-D
2.2)............................................... 3-22
Requirements (SKYACTIV-G 2.5,
SKYACTIV-G 2.5T)....................3-21
Tank capacity.................................9-5
Fuses.................................................. 6-52 Panel description......................... 6-55
Replacement................................ 6-52
G
Gauges............................................... 4-13
Glove Compartment.......................... 5-37
H
Hazardous Driving............................ 3-45
Hazard Warning Flasher....................4-91
HeadlightsComing home light......................4-82
Control......................................... 4-78
Flashing....................................... 4-82
Headlight flashing....................... 4-82
High-low beam............................ 4-82
Leaving home light..................... 4-83
Leveling....................................... 4-83
Head Restraint................................... 2-17
High Beam Control System
(HBC).............................................. 4-123 High Beam Control System (HBC)
indicator light (green)................4-124
Hill Launch Assist (HLA).......... .... 4-109
HomeLink Wireless Control System
(Type A)............................................ 4-92
HomeLink Wireless Control System
(Type B)............................................ 4-95
Hood Release............. ....................... 6-18
Horn...................................................4-91
I
If a Warning Light Turns On or
Flashes............................................... 7-25
If the Active Driving Display Does Not
Operate.............................................. 7-51
Ignition Switch............................................ 4-4
Ignition Not Switched Off (STOP)
Warning Beep.................................... 7-46
Illuminated Entry System................. 5-32
Immobilizer System..... ..................... 3-40
Inside Trunk Release Lever.............. 3-20
Inspecting Brake Fluid Level............ 6-28
Inspecting Coolant Level.................. 6-26
Inspecting Engine Oil Level............. 6-25
Inspecting Washer Fluid Level......... 6-29
Instrument Cluster............................. 4-13 Instrument Cluster (Type A)........4-14
Instrument Cluster (Type B)........ 4-33
Instrument Cluster (Type C)........ 4-51
Instrument Cluster (Type A)............. 4-14
10-4
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27
Index
Average Fuel Economy............... 4-22
Blind Spot Monitoring (BSM)
Display......................................... 4-23
Compass Display......................... 4-25
Cruise Control Set Vehicle Speed
Display......................................... 4-25
Current Fuel Economy................ 4-22
Dashboard Illumina tion............... 4-20
Distance Recognition Support System
(DRSS) Display........................... 4-24
Distance-to-empty....................... 4-22
Engine Coolant Temperature
Gauge........................................... 4-19
Fuel Gauge.................................. 4-19
Indication/Indicator Lights.......... 4-29
Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Display..........................4-24
Maintenance Monitor.................. 4-23
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) D isplay.......4-24
Message Display..........................4-25
Message Indicated in Multi-
information Display (Type A)..... 7-41
Multi-information Display (Type
A)................................................. 4-15
Odometer..................................... 4-18
Outside Temperature Display...... 4-21
Remaining Diesel Exhaust Fluid
(DEF) and Maximum Driving
Distance Display..........................4-23
Speedometer................................ 4-14
Speed Unit Selector..................... 4-21
Tachometer.................................. 4-14
Traffic Sign Recognition System
(TSR) Display..............................4-24
Trip Meter....................................4-18
Warning Indication/Warning
Lights........................................... 4-26
Instrument Cluster (Type B)............. 4-33Average Fuel Economy............... 4-40
Blind Spot Monitoring (BSM)
Display......................................... 4-41
Compass Display......................... 4-42
Cruise Control Set Vehicle Speed
Display......................................... 4-42
Current Fuel Econo my................ 4-40
Dashboard Illumina tion............... 4-38
Distance Recognition Support System
(DRSS) Display........................... 4-42
Distance-to-empty....................... 4-39
Engine Coolant Temperature
Gauge........................................... 4-37
Fuel Gauge.................................. 4-37
Indication/Indicator Lights.......... 4-46
Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Display..........................4-41
Maintenance Monitor.................. 4-40
Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) D isplay.......4-42
Message Display..........................4-43
Message Indicated in Multi-
information Display (Type B)..... 7-41
Multi-information Display (Type
B)................................................. 4-34
Odometer..................................... 4-36
Outside Temperature Display...... 4-39
Remaining Diesel Exhaust Fluid
(DEF) and Maximum Driving
Distance Display..........................4-41
Speedometer................................ 4-33
Tachometer.................................. 4-33
Traffic Sign Recognition System
(TSR) Display..............................4-41
Trip Meter....................................4-36
Warning Indication/Warning
Lights........................................... 4-44
Instrument Cluster (Type C)............. 4-51
10-5
Mazda6_8JN3-EA-20H_Edition1_old 2020-6-18 17:31:27