31
■Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its original position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually
88
What to do if...
See the “OWNER’S MANUAL”
Turn signal indicatorIntuitive parking assist OFF
indicator (if equipped)
Headlight indicator (U.S.A.)RCTA OFF indicator
(if equipped)
Tail light indicator (Canada)PKSB OFF indicator
(if equipped)
Headlight high beam indicator
(flashes)
Slip indicator
Automatic High Beam
indicatorVSC OFF indicator
PCS warning lightSmart access system with
push-button start indicator
Cruise control indicator(U.S.A.)Parking brake
indicator
Dynamic radar cruise control
indicator(Canada)
Cruise control “SET” indicatorBrake hold standby indicator
(white)
LTA indicatorBrake hold operated indicator
(green)
LTA indicatorEco Driving Indicator Light
(orange)(flashes)LTA indicatorSnow mode indicator
BSM outside rear view mirror
indicators (if equipped)Low outside temperature
indicator
BSM OFF indicator
(if equipped)
For further information, refe r to the “OWNER’S MANUAL”.
