Page 348 of 436

3487-2. Steps to take in an emergency
Check the engine oil and change it if neces-
sary. After changing the engine oil, make 
sure to reset the message. ( P.298)
■If “Oil Maintenance Required” is dis-
played
Indicates that the engine oil should be 
changed.
Check and change the en gine oil, and oil fil-
ter by your Lexus deal er. After changing the 
engine oil, make sure  to reset the message. 
(  P.298)
■If a message that in dicates the need for 
visiting your Lexus dealer is displayed
The system or part shown on the 
multi-information display is malfunctioning. 
Have the vehicle inspected by your Lexus 
dealer immediately.
■If a message that in dicates the need for 
referring to Owner’s Manual is dis-
played
●If any of the following messages are 
shown on the multi-information display, 
follow the instructions.
• “Engine Coolant Temp High” ( P.365)
• “High Transmission Fluid Temp” ( P.138)
●If any of the following messages are 
shown on the multi-information display, it 
may indicate a malfunction. Have the 
vehicle inspected by your Lexus dealer 
immediately.
• “Access System with  Elec. Key Malfunc-
tion”
●If any of the following messages are 
shown on the multi-information display, it 
may indicate a malfunction. Immediately 
stop the vehicle and contact your Lexus 
dealer.
• “Braking Power Low”
• “Charging System Malfunction”
• “Oil Pressure Low”
NOTICE
■If “High Power Consumption Power 
to Climate Temporarily Limited” is 
displayed frequently
There is a possible malfunction relating 
to the charging system or the battery 
may be deteriorating. Have the vehicle 
inspected by your Lexus dealer. 
         
        
        
     
        
        Page 357 of 436

3577-2. Steps to take in an emergency
7
When trouble arises
One of the following may be the cause 
of the problem:
There may not be sufficient fuel in 
the vehicle’s tank.
Refuel the vehicle.
 The engine may be flooded.
Try to restart the engine again fol-
lowing correct starting procedures. 
( P.134)
 There may be a malfunction in the 
engine immobilizer system. 
( P.60)
One of the following may be the cause 
of the problem:
 The battery may be discharged. 
( P.361)
 The battery terminal connections 
may be loose or corroded. 
( P.301) The engine starting system may be 
malfunctioning due to an electrical 
problem such as electronic key battery 
depletion or a blown fuse. However, an 
interim measure is available to start the 
engine. (
P.357)
One of the following may be the cause 
of the problem:
 One or both of the battery terminals 
may be disconnected. ( P.301)
 The battery may be discharged. 
( P.361)
 There may be a malfunction in the 
steering lock system.
Contact your Lexus dealer if the problem 
cannot be repaired, or  if repair procedures 
are unknown.
When the engine does not start, the 
following steps can be used as an 
interim measure to start the engine if 
the engine switch is functioning nor-
mally:
1 Push the parking brake switch to 
check that the parking brake is set. 
(P.143)
Parking brake indicator will come on.
If the engine will not start
If the engine will not start even 
though correct starting procedures 
are being followed ( P.134), con-
sider each of the following points:
The engine will not start even 
though the starter motor oper-
ates normally.
The starter motor turns over 
slowly, the interior lights and 
headlights are dim, or the horn 
does not sound or sounds at a low 
volume.
The starter motor does not turn 
over
The starter motor does not turn 
over, the interior lights and head-
lights do not turn on, or the horn 
does not sound.
Starting the engine in an emer-
gency 
         
        
        
     
        
        Page 359 of 436

3597-2. Steps to take in an emergency
7
When trouble arises
Remove the cover inside the trunk and 
pull the lever.
■When the electronic key does not work 
properly
●Make sure that the smart access system 
with push-button start has not been deac-
tivated in the customization setting. If it is 
off, turn the function on.
●Check if battery-saving mo de is set. If it is 
set, cancel the function. ( P.100)
■Doors
Use the mechanical key ( P.90) in 
order to perform th e following opera-
tions:
If the fuel filler door cannot 
be opened
If the fuel filler door cannot be 
opened by pressing the center of 
the rear edge of the fuel filler door 
with the doors unlocked, the follow-
ing procedure can be used to open 
the fuel filler door.
Opening the fuel filler door
If the electronic key does not 
operate properly
If communication between the 
electronic key and vehicle is inter-
rupted ( P.100) or the electronic 
key cannot be used because the 
battery is depleted, the smart 
access system with push-button 
start and wireless remote control 
cannot be used. In such cases, the 
doors and trunk can be opened and 
the engine can be started by follow-
ing the procedure below.
NOTICE
■In case of a smart access system with 
push-button start malfunction or 
other key-rela ted problems
Take your vehicle with all the electronic 
keys provided with your vehicle to your 
Lexus dealer.
Locking and unlocking the 
doors, unlocking the trunk 
         
        
        
     
        
        Page 360 of 436

3607-2. Steps to take in an emergency
1Locks all the doors
2 Unlocks the door
Turning the key rearward unlocks the 
driver’s door. Turning the key once again 
within 5 seconds unlocks the other doors.
■Trunk
Turn the mechanical key clockwise to 
open. ( P.62)
■Key linked functions
1 Closes the windows and moon roof 
(turn and hold)
*
2Opens the windows and moon roof 
(turn and hold)
*
*
: This setting must be customized at your  Lexus dealer.
1
Ensure that the shift lever is in P and 
depress the brake pedal.
2 Touch the Lexus emblem side of the 
electronic key to the engine switch.
When the electronic key is detected, a 
buzzer sounds and the engine switch will 
turn to IGNITION ON mode.
When the smart access system with 
push-button start is deactivated in custom-
ization setting,  the engine switch will turn 
to ACCESSORY mode.
3 Firmly depress the brake pedal and 
check that   is shown on the 
multi-information display.
4 Press the engine switch.
In the event that the engine still cannot 
WARNING
■When using the mechanical key and 
operating the power windows or 
moon roof
Operate the power window or moon 
roof after checking to make sure that 
there is no possibility of any passenger 
having any of their body parts caught in 
the window or moon roof.
Also, do not allow children to operate the 
mechanical key. It is possible for children 
and other passengers  to get caught in 
the power window or moon roof.
Starting the engine 
         
        
        
     
        
        Page 366 of 436
3667-2. Steps to take in an emergency
Engine (IS300)Reservoir cap
“FULL” line
“LOW” line
Intercooler (IS300)
Reservoir cap
“F” line
“L” line
5 Add coolant if necessary.
Water can be used in an emergency if 
coolant is unavailable.
Engine (IS350 
AWD/IS350/IS300 AWD)
Engine (IS300)
Intercooler (IS300)
6 Start the engine and turn the air 
conditioning system on to check 
that the radiator cooling fans oper-
ate and to check for coolant leaks 
from the radiator or hoses.
The fans operate when  the air conditioning 
system is turned on  immediately after a 
cold start. Confirm that the fans are oper-
ating by checking the fan sound and air 
flow. If it is difficult  to check these, turn the 
air conditioning system on and off repeat-
A
B
C
A
B
C 
         
        
        
     
        
        Page 367 of 436

3677-2. Steps to take in an emergency
7
When trouble arises
edly. (The fans may not operate in freezing 
temperatures.)
7If the fans are not operating:
Stop the engine immediately and 
contact your Lexus dealer.
If the fans are operating:
Have the vehicle inspected at the 
nearest Lexus dealer.
8 Check if “Engine Coolant Temp 
High Stop in a Safe Place See 
Owner’s Manual” is shown on the 
multi-information display.
If the message does not disappear:
Stop the engine and contact your 
Lexus dealer.
If the message is not displayed:
Have the vehicle inspected at the 
nearest Lexus dealer.
WARNING
■When inspecting under the hood of 
your vehicle
Observe the following precautions.
Failure to do so may result in serious 
injury such as burns.
●If steam is seen coming from under the 
hood, do not open  the hood until the 
steam has subsided. The engine com-
partment may be very hot.
●Keep hands and clothing (especially a 
tie, a scarf or a muffler) away from the 
fans and belts.
Failure to do so may cause the hands 
or clothing to be  caught, resulting in 
serious injury.
●IS350 AWD/IS350/IS300 AWD: 
Do not loosen the coolant inlet cap or 
coolant reservoir cap while the engine 
and radiator are hot. (The coolant inlet 
cap is located under the engine cover.)
High temperature steam or coolant 
could spray out.
●IS300: Do not loosen the coolant inlet 
cap, coolant reservoir cap, or inter-
cooler reservoir cap while the engine 
and radiator are hot. High tempera-
ture steam or coolant could spray out.
NOTICE
■When adding engine coolant
Add coolant slowly after the engine has 
cooled down sufficiently. Adding cool 
coolant to a hot engine too quickly can 
cause damage to the engine. 
         
        
        
     
        
        Page 375 of 436

3758-1. Specifications
8
Vehicle specifications
*: The engine oil capacity is a reference quantity to be used when changing the 
engine oil. Warm up  and turn off the 
engine, wait more than 5 minutes, and 
check the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in 
your Lexus vehicle. Use Lexus 
approved “Toyota Genuine Motor Oil” 
or equivalent to satisfy the following 
grade and viscosity.
Oil grade: ILSAC GF-5 multigrade 
engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for 
good fuel economy and good starting 
in cold weather.
If SAE 0W-20 is not available, SAE 
5W-20 oil may be used. However, it 
must be replaced with SAE 0W-20 at 
the next oil change.
Outside temperature
Oil viscosity (0W-20 is explained here 
as an example):
• The 0W in 0W-20 indicates the  characteristic of the oil which allows 
cold startability. Oils with a lower 
value before the W allow for easier 
starting of the engine in cold 
weather. • The 20 in 0W-20 indicates the vis-
cosity characteristic of the oil when 
the oil is at high temperature. An oil 
with a higher viscosity (one with a 
higher value) may be better suited if 
the vehicle is operated at high 
speeds, or under extreme load con-
ditions.
How to read oil container label:
The International Lubricant Specifica-
tion Advisory Committee (ILSAC) 
Certification Mark is added to some oil 
containers to help you select the oil you 
should use.
A 
         
        
        
     
        
        Page 376 of 436

3768-1. Specifications
*: The fluid capacity is a reference quantity.If replacement is necessary, contact your Lexus dealer.
Cooling system
Capacity*
IS350 
AWD/IS350
/IS300 AWD
9.8 qt. (9.3 L, 8.2 Imp. qt.)
IS300
Engine
9.1 qt. (8.6 L, 7.6 Imp. qt.)
Intercooler
3.0 qt. (2.8 L, 2.5 Imp. qt.)
Coolant type
Use either of the following:
 “Toyota Super Long Life Coolant”
 Similar high-quality ethylene  glycol-based non-silicate, 
non-amine, non-nitrite, and non-borate coolant with 
long-life hybrid orga nic acid technology
Do not use plain water alone.
Ignition system (spark plug)
IS350 AWD/IS350/IS300  AWDIS300
MakeDENSO FK20HBR8NGK DILFR7K9G
Gap0.031 in. (0.8 mm)0.035 in. (0.9 mm)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs.  Do not adjust the spark plug gap.
Electrical system (battery)
Open voltage at 68°F (20°C):
12.3 V or higher
(Check the voltage 20 minutes after the engine 
and all lights are turned off.)
If the voltage is lower than the standard value, 
charge the battery.
Charging rates5 A max.