Page 279 of 308

9-93
0000AMake sure that a USB device with update files is connected to the system before turning
off the vehicle.
0000AWhen you set the update time to "0", the update notification window appears and then
the update starts.
000DTo close the notification window and proceed with the update, press Yes.
000DTo cancel the update, press No.
0000AOnce the update has started, you cannot cancel it. After the update, the\
system
automatically turns off.
0000AWhen you start the vehicle, the update complete notification appears to show the update
result. After update is completed, the SW Info/Update screen displays the updated
version.
0000AWhen you turn on the system while updating, you can see its progress.
0000AScheduled update is canceled when:
000DLow battery is detected when turning off the vehicle.
000DThe storage device with the update files is disconnected.
000DThe vehicle is started before the update scheduled time.
000DThe system has been turned off for more than 3 minutes with the vehicle turned off.
Page 285 of 308

10-5
Bluetooth connection
SymptomPossible causeSolution
The system is
not detected by a
Bluetooth device.
Registration mode
needs to be run.
On the All Menus screen, press Setup > Device Connections > Bluetooth >
Bluetooth Connections > Add New to
run the registration mode and perform
search again from the Bluetooth device.
> See "Connecting a Bluetooth device."
The Bluetooth
device is not
connected.
The Bluetooth
function should be
activated.
Activate the Bluetooth function on the
Bluetooth device to connect.
Any error occurs
while using the
Bluetooth function.
\225Turn the Bluetooth function OFF / ON on
the Bluetooth device and then connect
the device again.
\225Turn the Bluetooth device off and on and
then connect the device again.
\225Remove the battery from the Bluetooth
device and attach it back, turn on the
device, and then connect the device
again.
\225Delete the system and Bluetooth device
from the registration lists respectively,
and then connect the device again.
Page 286 of 308

10-6
Phone projection
SymptomPossible causeSolution
The phone
projection function
is not performed
when a smartphone
is connected using a
USB cable.
Phone projection is
not supported.
Visit the website to check whether your
smartphone supports the phone projection.
\225Android Auto: https://support.google.
com/androidauto
\225Apple CarPlay: http://www.apple.com/
ios/carplay
The function is
inactive.
\225On the All Menus screen, press Setup >
Device Connections, select the function
to use, and then turn on the phone
projection option.
\225Make sure that the phone projection is
not disabled in the App settings or block-
out settings on your smartphone.
Smartphone is
encountered with
poor operation or
malfunction.
\225Check that the smartphone battery level
is not too low. Recognition may not work
properly when the battery level is too
low.
\225The phone projection may not work
properly when the signal strength is
weak.
\225When the smartphone is locked, first
unlock it.
\225Initialize the smartphone and connect
the device again.
A black screen
appears when the
phone projection is
activated or in use.
The smartphone
malfunctions.
\225Remove the USB cable from the
smartphone and connect the device
again.
\225Initialize the smartphone and connect
the device again.
Page 299 of 308

10-19
C
Climate control system 2-13
Component Names and Functions
Control panel
Custom button 1-3
MAP button 1-2
MEDIA button 1-2
NAV button 1-2
POWER button/VOLUME knob 1-2
RADIO button 1-2
SEEK/TRACK button 1-3
SETUP button 1-3
System Reset button 1-3
TUNE knob/FILE knob/ENTER button 1-3
Steering wheel remote control
Call button 1-4
End Call button 1-4
MODE button 1-4
Move button 1-4
Voice Recognition button 1-4
Volume lever/Mute button 1-4
Contacts list 6-10
Control panel 1-2
D
Deleting a location 5-27
Destination search 5-3
Driving assist display 2-9
Index
A
Advanced system settings 9-35
Android devices
Android Auto 2-5
Apple devices
Apple CarPlay 2-7
B
Battery warning 1-6
Bluetooth
Bluetooth phone
Answering a call 6-14
Call 6-6
Contacts list 6-10
Dial pad 6-12
Favorites settings 6-8
Options during a call 6-15
Recent calls list 6-6
Switching to another call 6-16
Text message 6-17
Specifications 10-15
Bluetooth connection
Adding a device 6-2
Deleting a device 6-5
Device connection 6-4
Disconnecting a device 6-5