8
Two positions for the driver’s seat, steering column and outside mirrors can be stored in
the memory seat system. To set a memory position:
1.
Place the ignition swit
ch in the ON position. (The vehicle should be stopped while
setting the memory.)
2.
Adjust the driv
er’s seat, steering column
and outside mirrors to the desired
positions using the adjusting switches
for each feature.
3.
Push the SET
switch
, and within 5
seconds, push the memory switch (1 or 2)
. The indicator light for the memory
switch you select will illuminate for
approximately 5 seconds and a chime will
sound when the memory is stored.
The steering column will automatically move when the driver’s side door is
opened to allow the driver to get in and out of the driver’s seat more easily.
“Lift Steering upon Exit” and “Slide Driver Seat Back on Exit” can be adjusted in the
lower touch-screen display under “Comfort & Convenience”.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
Memory Seat (if so equipped)
