
3-20
Seat Belt Warning Light
Seat belt warning light  
(for driver’s seat)
ODN8039070L
As a reminder to the driver, the seat 
belt warning light will illuminate for 
approximately 6 seconds each time 
you place the ignition switch to the ON 
position regardless of belt fastening. 
However, if the seat belt is Unfastened, 
a warning chime will sound for 
approximately 6 seconds.
If you continue not to fasten the seat belt 
and you drive under 12 mph (20 km/h), 
the warning light will stay illuminated.
If you continue not to fasten the seat 
belt and you drive over 12 mph (20 km/h) 
the seat belt warning chime will sound 
for approximately 100 seconds and the 
corresponding warning light will blink.
If you unfasten the seat belt while driving 
under 12 mph (20 km/h), the seat belt 
warning light will illuminate until the seat 
belt is fastened.
If you unfasten the seat belt while 
driving over 12 mph (20 km/h), the 
seat belt warning chime will sound for 
approximately 100 seconds and the 
corresponding warning light will blink.
Seat belt warning light  
(for front passenger’s seat)
As a reminder to the front passenger, 
the front passenger’s seat belt warning 
lights will illuminate for approximately 6 
seconds each time you place the ignition 
switch to the ON position regardless of 
belt fastening.
If you continue not to fasten the seat belt 
and you drive under 12 mph (20 km/h), 
the warning light will stay illuminated.
If you continue not to fasten the seat 
belt and you drive over 12 mph (20 km/h) 
the seat belt warning chime will sound 
for approximately 100 seconds and the 
corresponding warning light will blink.
If you unfasten the seat belt while driving 
under 12 mph (20 km/h) the seat belt 
warning light will illuminate until the seat 
belt is fastened.
If you unfasten the seat belt while 
driving over 12 mph (20 km/h), the 
seat belt warning chime will sound for 
approximately 100 seconds and the 
corresponding warning light will blink.
 WARNING
The front passenger’s seat belt warning 
light may not properly operate if the 
front passenger does not sit properly in 
the seat.
If you place an object on the passenger 
seat or back seat or under the seats, 
the warning chime may sound. Please 
remove the object if the chime sounds. 
Seats & Safety System  

Instrument Cluster
4
Instrument Cluster ........................................................................\
.................4 -2Instrument Cluster Control ........................................................................\
..............4 -3
Gauges and Meters   ........................................................................\
.......................... 4-3
Transmission Shift Indicator
  ........................................................................\
............ 4-6
Warning and Indicator Lights
  ........................................................................\
.......... 4 -7
LCD Display Messages
  ........................................................................\
.................... 4-15
LCD Display (TYPE A, B) ........................................................................\
.......4- 19LCD Display Control ........................................................................\
........................4- 19
LCD Display Modes   ........................................................................\
........................ 4-20
Trip Computer........................................................................\
.................................. 4-31
LCD Display (TYPE C) ........................................................................\
........... 4- 34LCD Display Control ........................................................................\
.......................4- 34
View Modes   ........................................................................\
.................................... 4-35
Utility View Mode
  ........................................................................\
........................... 4-36
Option Menu
  ........................................................................\
................................... 4-38
User Settings Mode
  ........................................................................\
........................ 4-39
4. Instrument  Cluster   

04
4 -7
OIK047141
ODN8A049029
Shift Indicator Pop-up
The pop-up that indicates the current 
gear position is displayed in the cluster 
for about 2 seconds when shifting into 
other positions (P/R/N/D).
The shift indicator pop-up function can 
be activated or deactivated from the 
User Settings mode in the cluster LCD 
display.
Warning and Indicator Lights
 Information
Make sure that all warning lights are OFF 
after starting the engine. If any light is still 
ON, this indicates a situation that needs 
attention.
Air Bag Warning Light
This warning light illuminates:
•	When you place the ignition switch to 
the ON position.
 - The air bag w
arning light illuminates 
for about 6 seconds and then turns 
off when all checks have been 
performed
•	 The air bag warning light will remain 
illuminated if there is a malfunction 
with the Safety Restraint System (SRS) 
air bag operation.
In this case, have the vehicle 
inspected by an authorized HYUNDAI 
dealer.
Seat Belt Warning Light
This warning light informs the driver that 
the seat belt is not fastened.
For more information, refer to “Seat 
Belts” in chapter 3.
Type A
Type B   

04
4-9
Anti-lock Brake System (ABS) 
Warning Light
This warning light illuminates:
•	When you place the ignition switch to 
the ON position.
 - The ABS w
arning light illuminates 
for about 3 seconds and then turns 
off.
•	 Whenever there is a malfunction with 
the ABS.
Note that the hydraulic braking 
system will still be operational even if 
there is a malfunction with the ABS.
Electronic Brake Force 
Distribution (EBD) System 
Warning Light
These two warning lights illuminate at the 
same time while driving:
When the ABS and regular brake system 
may not work normally.
In this case, have the vehicle inspected 
by an authorized HYUNDAI dealer.
 WARNING
Electronic Brake Force Distribution 
(EBD) System Warning Light
When both ABS and Parking Brake & 
Brake Fluid Warning Lights are on, the 
brake system will not work normally 
and you may experience an unexpected 
and dangerous situation during sudden 
braking.
In this case, avoid high speed driving 
and abrupt braking.
Have the vehicle inspected by an 
authorized HYUNDAI dealer as soon as 
possible.
 Information - Electronic Brake 
Force Distribution (EBD) 
System Warning Light
When the ABS Warning Light is on 
or both ABS and Parking Brake & 
Brake Fluid Warning Lights are on, the 
speedometer, odometer, or tripmeter may 
not work. Also, the EPS Warning Light 
may illuminate and the steering effort may 
increase or decrease.
In this case, have the vehicle inspected by 
an authorized HYUNDAI dealer as soon 
as possible.
Electronic Parking Brake 
(EPB) Warning Light
EPB
This warning light illuminates:
•	 When you place the Engine Start/Stop 
button to the ON position.
 - The EPB w
arning light illuminates 
for approximately 3 seconds and 
then turns off.
•	 Whenever there is a malfunction with 
the EPB.
If this occurs, have the vehicle 
inspected by an authorized HYUNDAI 
dealer.
 Information
The Electronic Parking Brake (EPB) 
Warning Light may illuminate when 
the Electronic Stability control (ESC) 
Indicator Light comes on to indicates that 
the ESC is not working properly (This 
does not indicate malfunction of the EPB).   

Instrument Cluster
4-14
Turn Signal Indicator Light
This indicator light blinks:
When you operate the turn signal 
indicator stalk.
If any of the following occur, there may be 
a malfunction with the turn signal system.
 - The turn signal indicator light 
illuminates but does not blink
 - The turn signal indica
tor light blinks 
rapidly
 - The turn signal indica
tor light does not 
illuminate at all
If any of these conditions occur, have 
your vehicle inspected by an authorized 
HYUNDAI dealer.
Headlamp Warning Light  
(if equipped)
This warning light illuminates:
If one of the exterior bulbs (headlamp, 
stop lamp, high mounted stop lamp) is 
not operating properly. One of the bulbs 
may need to be replaced. If the vehicle 
is equipped with LED headlamps, have 
the vehicle inspected by an authorized 
HYUNDAI dealer.
 Information
When replacing the bulb, use the same 
wattage bulb.
For more information, refer to "Light 
bulbs" in chapter 8.
High Beam Indicator Light
This indicator light illuminates:
•	 When the headlights are on and in the 
high beam position.
•	 When the turn signal lever is pulled 
into the Flash-to-Pass position.
Light ON Indicator Light
This indicator light illuminates:
When the tail lights or headlamps are on.
High Beam Assist indicator 
light (if equipped)
This indicator light illuminates:
•	When the High Beam is on with the 
light switch in the AUTO light position.
•	 If your vehicle detects oncoming or 
preceding vehicles, High Beam Assist 
system will switch the high beam to 
low beam automatically.
For more information, refer to "High 
Beam Assist (HBA)" in chapter 5.   

04
4-17
Door, Hood, Trunk Open Indicator
ODN8049012
This warning is displayed if any door or 
the hood or the liftgate is left open. The 
warning will indicate which door is open 
in the display.
 CAUTION
Before driving the vehicle, you should 
confirm that the door/hood/liftgate 
is fully closed. Also, check there is no 
door/hood/liftgate open warning light 
or message displayed on the instrument 
cluster.
Sunroof Open (if equipped)
ODN8049013
This warning is displayed if you turn off 
the engine when the sunroof is open.
Close the sunroof securely before leaving 
your vehicle.
Low Pressure
ODN8049019L
This warning message is displayed if the 
tire pressure is low. The corresponding 
tire on the vehicle will be illuminated.
For more information, refer to "Tire 
Pressure Monitoring System (TPMS)" in 
chapter 7.
Lights Mode
OIK047145L
This indicator displays which exterior 
light is selected using the lighting 
control.   

Instrument Cluster4-22
Master warning mode
OIK047173L
This warning light informs the driver the 
following situations. - Forward Collision-Avoidance Assist  system malfunction (if equipped)
 - Forward Collision-Avoidance Assist  radar blocked (if equipped)
 - Blind-Spot Collision Warning system  malfunction (if equipped)
 - Blind-Spot Collision Warning radar  blocked (if equipped)
 - High Beam Assist malfunction (if  equipped)
 - Lamp malfunction (if equipped)
 - Smart Cruise Control malfunction (if  equipped)
 - Tire Pressure Monitoring System  (TPMS) malfunction (if equipped)
The Master Warning Light illuminates 
if one or more of the above warning 
situations occur. At this time, a Master 
Warning icon (
) will appear beside 
the User Settings icon (), on the LCD 
display.
If the warning situation is solved, the 
master warning light will be turned 
off and the Master Warning icon will 
disappear.
User settings mode
OIK047148L
In this mode, you can change the 
settings of the instrument cluster, doors, 
lamps, etc.
1.  Head-Up Display
2.  Driver Assistance
3.  Door
4.  Lights
5.  Sound
6.  Convenience
7.   Service interval
8.  Other
9.  Language
10. Reset
The information provided may differ 
depending on which functions are 
applicable to your vehicle. 

04
4-39
Warning message mode
ODN8A059295
When the warning message light appears 
in the option menu, press the OK button 
and check the detailed information.
User Settings Mode
In this mode, you can change the 
settings of the instrument cluster, doors, 
lamps, etc.
1. Head-up display
2. Driver assistance
3. Door
4. Lights
5. Sound
6. Convenience
7. Service interval
8. Other
9. Language
10. Reset
The information provided may differ 
depending on which functions are 
applicable to your vehicle.
OOSEV048172L
Shift to P to edit settings
This warning message appears if you try 
to adjust the User Settings while driving.
For your safety, change the User Settings 
after parking the vehicle, applying the 
parking brake and shifting to P (Park).
Quick guide help
This mode provides quick guides for the 
systems in the User Settings mode.
Select an item, press and hold the OK 
button.
For more information, about each 
system, refer to this Owner's Manual.