09
9-55
Tail/Stop lamp/Turn signal lamp/
Side marker (Outer lamp) (Bulb type)
1. Open the trunk lid.
OCN7080045
2. Remove the service cover by pulling
out the service cover.
OCN7080046
3. Loosen the assembly retaining nuts.
OCN7080047
4. Remove the rear combination light
assembly from the body of the
vehicle.
OCN7080075L
OCN7090019N
[A] : Tail/Stop lamp, [B] : Turn signal lamp,
[C] : Rear side marker
5. Remove the socket from the
assembly b y turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
6.
Remo
ve the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
7.
Insert a new bulb b
y inserting it into
the socket and rotating it until it locks
into place.
8.
Install the sock
et in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
I
I-5
Exterior Lights ........................................................................\
.............................5-68
Battery saver function ........................................................................\
..............5-71
Headlamp delay function ........................................................................\
.........5-71
High beam operation ........................................................................\
................ 5-69
Lighting control ........................................................................\
........................ 5-68
Turn signals and lane change signals ...............................................................5-70
Exterior Overview
........................................................................\
......................... 2-2
F
Filter Inspection
........................................................................\
........................... 9-21
Filter replacement ........................................................................\
.....................9-21
Forward Collision–A
voidance Assist (FCA) (front view camera only)
...............7-2
Function malfunction and limitations ................................................................ 7-7
Function operation ........................................................................\
...................... 7-5
Function settings ........................................................................\
........................ 7-3
Forward Collision–A
voidance Assist (FCA) (sensor fusion)
..............................7-14
Function malfunction and limitations .............................................................. 7-22
Function operation ........................................................................\
.................... 7-18
Function settings ........................................................................\
...................... 7-16
Fuel Filler Door
........................................................................\
........................... 5-66
Fuel Requirements
........................................................................\
......................... 1-5
Fuses
........................................................................\
............................................ 9-40
Engine Compartment Panel Fuse Replacement ...............................................9-42
Fuse/Relay Panel Description ........................................................................\
.. 9-43
Instrument Panel Fuse Replacement ................................................................9-41
G
Guide to Hyundai Genuine Parts
........................................................................\
... 1-3
H
Hazard W
arning Flasher
........................................................................\
................ 8-2
High Beam
Assist (HBA)
........................................................................\
........... 5-72
Detecting sensor (Front view camera) .............................................................5-72
Function malfunction and limitations .............................................................. 5-73
Function operation ........................................................................\
.................... 5-73
Function settings ........................................................................\
...................... 5-72