Page 489 of 597

488
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of an y abnormality (noise, smell, insufficient 
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. 
(Note, however, that service at a dealer  is not mandatory to keep your warranties in 
effect.)
■Routine inspections
Perform inspections before long distance tri ps, when washing the vehicle, or when 
refueling.
2 Maintenance  P. 25
■Periodic inspections
• Check the brake fluid level monthly.
2 Checking the Brake Fluid  P. 507
•Check the tire pressure monthly. Examin e the tread for wear and foreign objects.
2Checking and Maintaining Tires  P. 516
•Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 508
•Check the condition of the wiper bl ades at least every six months.
2Checking and Maintaining Wiper Blades P. 514
■Types of Inspection and Maintenance
1Inspection and Maintenance
Maintenance, replacement, or repair of 
emissions control devices and systems may be 
done by any automotive repair establishment or 
individuals using parts that are “certified” to 
EPA standards.
According to state and fede ral regulations, failure to 
perform maintenance on the maintenance main 
items marked with # will  not void your emissions 
warranties. However, all ma intenance services should 
be performed in accordan ce with the intervals 
indicated by the mult i-information display.
2 Maintenance Service Items  P. 494
If you want to perform  complex maintenance tasks 
that require more skills a nd tools, you can purchase a 
subscription to the Service Express website at 
www.techinfo.honda.com .
2 Authorized Manuals  P. 584
If you want to perform ma intenance yourself, make 
sure that you have the necessary tools and skills first.
After performing maintenanc e, update the records in 
the separate maintenance booklet.
U.S. models 
     
        
        Page 509 of 597
508
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Remove the engine compartment cover.
2 Engine Compartment Cover P. 498
2. Remove the clips.
3.  Remove the air intake duct.
High beam headlight:60 W (HB3 for halogen bulb type)
Low beam headlight:LED
■High Beam Headlights
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration,  or a scratch on the glass can cause 
the bulb to overhe at and shatter.
The headlight aim is set by  the factory, and does not 
need to be adjusted. Howeve r, if you regularly carry 
heavy items in the cargo area or tow a trailer, have 
the aiming readjusted at a dealer or by a qualified 
technician.
When replacing a halogen bu lb, handle it by its base, 
and protect the glass from c ontact with your skin or 
hard objects. If you touch  the glass, clean it with 
denatured alcohol and a clean cloth.
ClipsDriver side 
     
        
        Page 534 of 597

Continued533
uuCleaning uExterior Care
Maintenance
If you get gasoline, oil, engine coolant, or battery fluid on resi n coated parts, they 
may be stained or the coating may peel. Prom ptly wipe it away using a soft cloth and 
clean water.
Wipe using a glass cleaner.
Aluminum is susceptible to deterioration caused by salt and other road 
contaminants. When necessary, as early as possible use a sponge and mild detergent 
to wipe away these contaminants. Do no t use a stiff brush or harsh chemicals 
(including some commercial wheel cleaners).
These can damage the protective finish on aluminum alloy wheels, resulting in 
corrosion. Depending on the type of finish, the wheels also may lose their luster or 
appear burnished. To avoid water stains, wi pe the wheels dry with a cloth while they 
are still wet.
■Maintaining the Bumpers and Other Resin Coated Parts
■Cleaning the Window
■Maintaining Aluminum Wheels
1 Maintaining the Bumpers an d Other Resin Coated Parts
Ask a dealer about the corr ect coating material when 
you want to repair the painted surface of the parts 
made of resin. 
     
        
        Page 538 of 597

537
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
ToolsTypes of Tools .................................. 538
If a Tire Goes Flat Changing a Flat Tire ......................... 539
Engine Does Not Start
Checking the Engine ........................ 549
If the Smart Entry Remote Battery is Weak .......................................... 550
Emergency Engine Stop ................... 551
If the Battery Is Dead ....................... 552
Overheating How to Handle Overheating ............. 555 Indicator, Coming On/Blinking
If the Low Oil Pressure Indicator Comes 
On ............................................. 557
If the Charging System Indicator Comes 
On ................................................. 557
If the Malfunction Indicator Lamp Comes  On or Blinks ................................... 558
If the Brake System I ndicator (Red) Comes 
On .................................................559
If the Electric Power Steering (EPS) System 
Indicator Comes On ....................... 559
If the Low Tire Pressure/TPMS Indicator  Comes On or Blinks........................ 560 If the Transmission System Indicator Blinks 
along with the Warning Message... 561
Fuses
Fuse Locations ................................. 562
Inspecting and Changing Fuses ........ 567
Emergency Towing ........................... 568
If You Cannot Unlock the Fuel Fill Door....569
If You Cannot Unlock the Tailgate ... 570
Refueling
Refueling From a Portable Fuel  Container ................................... 571 
     
        
        Page 576 of 597
575
uuSpecifications u
Information
■
Brake Fluid
■ Automatic Tran smission Fluid
■ Rear Differential Fluid
*
■Transfer Assembly Fluid*
SpecifiedHonda Heavy Duty Brake Fluid DOT 3
SpecifiedHonda ATF-TYPE 3.1 or higher
Capacity Change 3.7 US qt (3.5 L)
SpecifiedHonda DPSF-II
Capacity Change 1.92 US qt (1.82 L)
SpecifiedHonda HGO-1
Capacity Change 0.45 US qt (0.43 L)
■ Engine Oil
■ Engine Coolant
Recommended·Honda Genuine Motor Oil 0W-20
·API Premium-grade 0W-20 detergent oil
Capacity Change 5.4 US qt (5.1 L)
Change 
including 
filter
5.7 US qt (5.4 L)
SpecifiedHonda Long Life Antifreeze/Coolant Type 2
Ratio 50/50 with distilled water
Capacity1.96 US gal (7.40 L)
(change including the remaining 0.22 US gal 
(0.82 L) in the reserve tank)
■ Tire
RegularSize245/60R18 105HPressure
psi (kPa [kgf/cm2])35 (240 [2.4])
Compact 
Spare Size
T165/90R17 105M
Pressure
psi (kPa [kgf/cm
2]) 60 (420 [4.2])
Wheel SizeRegular18 x 8JCompact Spare17 x 4T
* Not available on all models