Page 130 of 597
129
uuLocking and Unlocking the Doors uChildproof Door Locks
Controls
Press the master door lo ck switch in as shown 
to lock or unlock all the doors.
Childproof Door Locks
The childproof door locks prevent the rear  doors from being opened from the inside 
regardless of the position of the lock tab.
Slide the lever in the rear door to the lock 
position, and close the door.
■When opening the door
Open the door using the outside door handle.
■Using the Master Door Lock Switch1 Using the Master Door Lock Switch
When you lock/unlock either of the front doors using 
the master door lock switch , all the other doors lock/
unlock at the same time.
To Unlock
Master Door Lock Switch
To Lock
■Setting the Childproof Door Locks
1 Childproof Door Locks
To open the door from the inside when the 
childproof door lock is on, put the lock tab in the 
unlock position, lower the  rear window, put your 
hand out of the window, and pull the outside door 
handle.
Lock Unlock 
     
        
        Page 131 of 597
130
uuLocking and Unlocking the Doors uAuto Door Locking/Unlocking
Controls
Auto Door Locking/Unlocking
Your vehicle locks or unlocks all doors auto matically when a certain condition is met.
■Drive lock mode
All doors lock when the vehicle’s speed reaches about 10 mph (15 km/h).
■Driver’s door open mode
All doors unlock when the driver’s door is opened.
■Auto Door Locking
■Auto Door Unlocking
1 Auto Door Locking/Unlocking
You can turn off or cha nge to another auto door 
locking/unlocking sett ing using the audio/
information screen. 2 Customized Features  P. 298 
     
        
        Page 135 of 597

134
uuOpening and Closing the Trunk uUsing the Trunk Release Button
Controls
Using the Trunk  Release Button
Push up the trunk release button on the trunk 
lid after all the doors are unlocked.
Even if the trunk is locked, you can open the 
trunk if you carry the smart entry remote. u The beeper will sound.
Trunk Main Switch
The trunk main switch disables the trunk 
release button on the trunk lid to protect 
luggage in the trunk.
1.Turn off the trunk main switch in the glove 
box.
2. Lock the glove box.
1Using the Trunk Release Button
•If you forget the smart entry remote inside, the 
beeper will sound and th e trunk will not close.
•A person who is not carrying the smart entry 
remote can unlock the trunk if a person who is 
carrying it is within range.
•If the beeper sounds after you close the trunk, 
move the smart entry remote away from the trunk 
and close again.
•The smart entry remote may not operate if it is too 
close to the trunk.
Trunk Release Button
1 Trunk Main Switch
If you need to give the ke y to someone else, remove 
the built-in key from the smart entry remote by 
sliding the release knob, and give the remote as a 
valet key.
The trunk main switch will also disable the tailgate 
lock/unlock function when  its setting is enable.
ON
OFF
Trunk Main 
Switch 
     
        
        Page 138 of 597

Continued137
uuSecurity System uSecurity System Alarm
Controls
■To deactivate the security system alarm
Unlock the vehicle using the key, remote tra nsmitter, or smart entry system, or the 
power mode is set to ON. The system, along with the horn and flashing lights, is 
deactivated.
■Setting the security system alarm
The security system alarm automatically  sets when the following conditions have 
been met:
• The power mode is set to VEHICLE OFF (LOCK).
• The hood is closed.
• All doors and trunk are locked from outsid e with the key, remote transmitter, or 
smart entry system.
■When the security system alarm sets
The security system alarm in dicator in the instrument panel blinks and the blinking 
interval changes after about 15 seconds.
■To cancel the security system alarm
The security system alarm is canceled wh en the vehicle is unlocked using the key, 
remote transmitter, or smart entry system,  or when the power mode is set to ON. 
The security system alarm indica tor goes off at the same time.
1Security System Alarm
Do not set the security system alarm when someone 
is in the vehicle or a window  is open. The system can 
accidentally activate when:
•Unlocking the door with the lock tab.•Opening the trunk with the trunk release or the 
emergency trunk opener. 
•Opening the hood with the hood release.
If the battery goes dead after you have set the 
security system alarm, the security alarm may go off 
once the battery is re charged or replaced.
If this occurs, deactivate the security system alarm by 
unlocking a door using the ke y, remote transmitter, 
or smart entry system. 
     
        
        Page 140 of 597

139Continued
Controls
Windows
Opening/Closing the Power Windows
The power windows can be opened and closed when the power mode is in ON, 
using the switches on the doors.
The driver’s side switches can be used to open and close all the windows.
The power window lock button on the driver’s side must be switched off (not 
pushed in, indicator off) to open and cl ose the windows from anywhere other than 
the driver’s seat.
When the power window lock button is pushed in, the indicator comes on and you 
can only operate the driver’s window. Turn the power window lock button on if a 
child is in the vehicle.
■Manual operation
To open:  Push the switch down lightly, and 
hold it until the desired position is reached.
To close:  Pull the switch up lightly, and hold it 
until the desired position is reached.
■Automatic operation
To open: Push the switch down firmly.
To close:  Pull the switch up firmly.
The window opens or closes completely. To 
stop the window at any time, push or pull the 
switch briefly.
■Opening/Closing the Windows with Auto-Open/Close 
Function
1 Opening/Closing the Power Windows
The power windows can be  operated for up to 10 
minutes after you set the power mode to VEHICLE 
OFF.
Opening either front door cancels this function.
Auto Reverse
If a power window senses  resistance when closing 
automatically, it will  stop closing and reverse 
direction.
The driver’s window auto re verse function is disabled 
when you continuously pull up the switch.
The auto reverse function  stops sensing when the 
window is almost closed to en sure that it fully closes.
3WARNING
Closing a power window on someone’s 
hands or fingers can cause serious injury.
Make sure your passengers are away from 
the windows before closing them.
ON
OFF
Power Window 
Lock Button
Front Passenger’s 
Window Switch
Driver’s Window 
Switch
Indicator 
     
        
        Page 143 of 597
uuWindows uOpening/Closing th e Power Windows
142
Controls
To open: Unlock the driver’s door with the 
key. Within 10 seconds of returning the key to 
the central position, turn  the key in the unlock 
direction and hold it there.
To close:  Lock the driver’s door with the key. 
Within 10 seconds of re turning the key to the 
central position, turn  the key in the lock 
direction and hold it there.
Release the key to stop the windows at the 
desired position. If you want further 
adjustment, repeat the same operation.
■Opening/Closing the Windows with the Key1 Opening/Closing the Windows with the Key
If you open/close the windows with the key, the 
moonroof will open/close au tomatically along with 
them.
Models with moonroof
CloseOpen 
     
        
        Page 146 of 597

145Continued
Controls
Operating the Switches Around the Steering Wheel
ENGINE START/STOP Button
*1:Canadian models
■Changing the Power Mode1ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
You can start the engine  when the smart entry 
remote is inside the vehicle.
If the battery of the smar t entry remote is getting 
low, the engine may not start when you push the 
ENGINE START/STOP  button. If the engine does not 
start, refer to the following link. 2 If the Smart Entry Remote Battery is Weak  
P. 550
The engine may also run if the smart entry remote is 
close to the door or window, ev en if it is outside the 
vehicle.
ON mode:
The  ENGINE START/STOP  button is on (in red), if the 
engine is running.
Operating Range
VEHICLE OFF (LOCK)
The button is off.
The steering wheel is locked
*1. 
The power to all electrical components is turned 
off.
ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories 
in this position.
ON
The button blinks (in red).
All electrical components can be used.
Press the button.
Without 
pressing the 
brake pedal 
     
        
        Page 147 of 597

uuOperating the Switches Around the Steering Wheel uENGINE START/STOP Button
146
Controls
If you leave the vehicle for 30 to  60 minutes with the transmission in (P and the 
power mode in ACCESSORY, the vehicle auto matically goes into the mode similar to 
VEHICLE OFF (LOCK) to avoid draining the battery.
When in this mode:
The steering wheel does not lock.
You cannot lock or unlock doors with th e remote transmitter or the smart entry 
system.
Press the ENGINE START/STOP  button to switch the mode to VEHICLE OFF (LOCK).
If you open the driver’s door when the power mode is set to ACCESSORY, a warning 
beep sounds.
■Automatic Power Off
■Power Mode Reminder
1 ENGINE START/STOP Button
If the power mode does not  change from VEHICLE 
OFF to ACCESSORY, press the ENGINE START/STOP 
button while moving the st eering wheel left and 
right. The steering wheel  will unlock, allowing the 
mode to change.
Do not leave the power mode in ACCESSORY or ON 
when you get out.
Canadian models
Canadian models