Page 85 of 597
84
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Vehicle Stability 
AssistTM (VSA®) 
OFF  Indicator
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
——
●Comes on when the   (VSA ® 
OFF ) button is pressed.●Appears when Normal or Snow Mode is 
selected.
2VSA ® On and Off  P. 413
●Comes on when Mud/Sand mode 
is selected by pressing the mode 
button.
●Appears when Mud Mode is selected.
2Intelligent Traction Management  P. 404
●Appears when Sand Mode is selected.
2Intelligent Traction Management  P. 404
●Appears when Mud or Sand Mode is 
selected. To turn VSA® on, select Normal or 
Snow.
2 Intelligent Traction Management  P. 404
AWD models 
     
        
        Page 86 of 597

85
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Electric Power 
Steering (EPS) 
System Indicator
●Comes on when you set the 
power mode to ON, and goes off 
when the engine starts.
●Comes on if there is a problem 
with the EPS system.
●Stays on constantly or  does not come on 
at all  - Have your vehicle checked by a 
dealer.
2 If the Electric Power Steering (EPS) 
System Indicator Comes On  P. 559
Low Tire Pressure/
TPMS Indicator
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Comes on if the tire pressure of 
any of the tires becomes low.
●Blinks for about one minute, and 
then stays on if there is a problem 
with the TPMS with Tire Fill 
Assist, or when a compact spare 
tire is temporarily installed.
●Comes on while driving - Stop in a safe 
place, check tire pressures, and inflate the 
tire(s) if necessary.
●Blinks and remains on  - Have your vehicle 
checked by a dealer. If the vehicle is fitted 
with a compact spare ti re, get your regular 
tire repaired or replaced and put back on 
your vehicle as soon as you can.
Turn Signal and 
Hazard Warning 
Indicators
●Blinks when you operate the turn 
signal lever.
●Blink along with all turn signals 
when you press the hazard 
warning button.
●Does not blink or blinks rapidly
2 Replacing Light Bulbs  P. 511, 512
—
High Beam 
Indicator●Comes on when the high beam 
headlights are on.—— 
     
        
        Page 87 of 597
86
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Lights On 
Indicator●Comes on when the parking, tail, 
and other external lights are on.2Light Switches  P. 149—
Auto High-Beam 
Indicator
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Comes on when all the operating 
conditions of the auto high-beam 
are met.
2Auto High-Beam (High Beam Support 
System)  P. 154—
Fog Light Indicator
●Comes on when the fog lights 
are on.
2Fog Lights  P. 152—
Immobilizer 
System Indicator
●Comes on briefly when you set 
the power mode to ON, then 
goes off.
●Comes on if the immobilizer 
system cannot recognize the key 
information.
●Blinks - You cannot start the engine. Set the 
power mode to VEHICLE  OFF, then select the 
ON mode again.
●Repeatedly blinks  - The system may be 
malfunctioning. Have your vehicle checked by 
a dealer.
●Do not attempt to alter this system or add 
other devices to it. Electrical problems can 
occur.
— 
     
        
        Page 89 of 597

88
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Smart Entry 
System Indicator
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Comes on as soon as a problem is 
detected in the smart entry 
system or push button starting 
system.
●Stays on constantly  or does not come on 
at all - Have your vehicle checked by a 
dealer.
All-wheel drive 
( AWD ) Indicator*
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Comes on if there is a problem 
with the AWD system.
●Blinks when the differential 
temperature is too high.
●Stays on constantly  - The engine drives 
the front wheels only in this state. Have your 
vehicle checked by a dealer.
●Blinks while driving - The engine drives 
only the front wheels in  this state. Stop in a 
safe place, shift to 
(P, and idle the engine 
until the indicator goes  off. If the indicator 
does not stop blinking, take your vehicle to 
a dealer.
2 Intelligent Variable Torque 
Management (i-VTM4TM) AWD System* 
P. 415
* Not available on all models 
     
        
        Page 90 of 597
89
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Auto Idle Stop 
Indicator (Green)●Comes on when Auto Idle Stop is 
in operation. The engine 
automatically shuts off.
2Auto Idle Stop  P. 406—
Auto Idle Stop 
System Indicator 
(Amber)
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
——
●Comes on when the Auto Idle 
Stop system has been turned off 
by the Auto Idle Stop OFF  
button.
2 Auto Idle Stop System ON/OFF  P. 407
●Blinks if there is a problem with 
the Auto Idle Stop system.●Blinks - Have your vehicle checked by a 
dealer. 
     
        
        Page 91 of 597
90
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Road Departure 
Mitigation 
Indicator
●Comes on for a few seconds 
when you set the power mode 
to ON, then goes off.
●Comes on if there is a problem 
with the Road Departure 
Mitigation system.
●Stays on constantly  - Have your vehicle 
checked by a dealer.
●Comes on when the Road 
Departure Mitigation system 
shuts itself off.●Stays on  - The temperature inside the camera 
is too high.
Use the climate control  system to cool down 
the camera.
The system activates  when the temperature 
inside the camera cools down.
2 Front Sensor Camera  P. 465
●Stays on - The area around the camera is 
blocked by dirt, mud, etc. Stop your vehicle in 
a safe place and wipe the  debris off with a soft 
cloth.
●Have your vehicle checked by a dealer if the 
indicator and message come back on after 
you cleaned the area around the camera.
2 Front Sensor Camera  P. 465 
     
        
        Page 92 of 597

91
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Adaptive Cruise 
Control (ACC) 
Indicator (Amber)
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Comes on if there is a problem 
with ACC.
●Comes on while driving  - Have your 
vehicle checked by a dealer.
●Comes on if anything covers the 
radar sensor cover and prevents 
the sensor from detecting a 
vehicle in front.
●May come on when driving in 
bad weather (rai n, snow, fog, 
etc.)
●ACC has been automatically 
canceled.
●When the radar sensor gets dirty, stop 
your vehicle in a safe place, and then 
clean the sensor using a soft cloth. 
Indicator may take some time to go off 
after the radar sensor is cleaned.
●Have your vehicle checked by a dealer if 
the message does not disappear even 
after you clean the front grille.
2 Radar Sensor  P. 467
Adaptive Cruise 
Control (ACC) 
Indicator (Green)●Comes on when you press the 
MAIN  button.2Adaptive Cruise Control (ACC)  
P. 438—
Lane Keeping 
Assist System 
( LKAS ) Indicator 
(Amber)●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Comes on if there is a problem 
with the LKAS.
●Stays on constantly  - Have your vehicle 
checked by a dealer. 
     
        
        Page 93 of 597
92
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Lane Keeping 
Assist System 
(LKAS ) Indicator 
(Green)●Comes on when you press the 
MAIN  button.
2Lane Keeping Assist System (LKAS)  
P. 451—
Blind spot 
information 
System Indicator
*
●Comes on for a few seconds 
when you set the power mode to 
ON, then goes off.
●Stays on while the blind spot 
information system is turned off.
2 Blind spot information System* P. 420
●Comes on when mud, snow, or 
ice accumulates in the vicinity of 
sensor.●Comes on while driving  - Remove the 
obstacle in the vicinity of the sensor.
2 Blind spot information System* P. 420
●Comes on if there is a problem 
with the system.●Comes on while driving  - Have your 
vehicle checked by a dealer.
ECON Mode 
Indicator
●Comes on when the ECON mode 
is on.
2 ECON Mode P. 403
* Not available on all models