Page 15 of 597

14
Quick Reference Guide
Instrument Panel (P77)
System Indicators
Malfunction Indicator 
Lamp
Low Oil Pressure 
Indicator
Charging System 
IndicatorAnti-lock Brake System 
(
ABS ) Indicator
Vehicle Stability Assist
TM 
(VSA® ) System Indicator
VSA ® OFF Indicator
Electric Power Steering 
(EPS) System Indicator
Lights Indicators
Lights On Indicator
High Beam Indicator
Immobilizer System 
Indicator
Seat Belt Reminder 
Indicator
System Indicators
System Message 
IndicatorParking Brake and 
Brake System 
Indicator (Red)Supplemental 
Restraint System 
Indicator
Low Fuel Indicator
Gauges (P110)/Multi-Information Display (P111)/System Indicators (P78)
Low Tire Pressure/
TPMS Indicator Turn Signal and 
Hazard Warning 
Indicators
Smart Entry System 
Indicator Ambient Meter
Shift Position Indicator/
Transmission System 
Indicator Fuel Gauge
TachometerTemperature 
GaugeSpeedometer
Multi-Information 
Display
Brake System 
Indicator (Amber)
All-wheel drive (AWD) 
Indicator*
Blind spot information 
System Indicator*
System Indicators
Collision Mitigation Braking 
SystemTM (CMBSTM) Indicator
Road Departure Mitigation 
Indicator
Security System Alarm 
Indicator
U.S.
Canada U.S.
Canada
Fog Light Indicator
ECON Mode Indicator
Auto High-Beam 
Indicator
Lane Keeping Assist 
System (
LKAS) Indicator 
(Green/Amber)
Adaptive Cruise 
Control ( ACC) 
Indicator (Green/
Amber)
Intelligent Traction 
Management Indicator
Bed Lights On Indicator
Auto Idle Stop System 
Indicator (Amber)/
Auto Idle Stop 
Indicator (Green)
M  (Sequential mode) 
Indicator/Sequential Mode 
Gear Selection Indicator 
     
        
        Page 26 of 597
25
Quick Reference Guide
Maintenance (P487)
Under the Hood (P496)
●Check engine oil, engine coolant, and windshield washer 
fluid. Add when necessary.
●Check brake fluid.●Check the battery condition monthly.
aPull the hood release handle under the corner of the 
dashboard.
bLocate the hood latch lever, push it to the side, and then 
raise the hood. Once you have raised the hood slightly, you 
can release the lever.
cWhen finished, close the hood  and make sure it is firmly 
locked in place.
Lights (P508)
●Inspect all lights regularly.
Wiper Blades (P514)
●Replace blades if they leave streaks across 
the windshield or become noisy.
Tires (P516)
●Inspect tires and wheels regularly.●Check tire pressures regularly.●Install snow tires for winter 
driving. 
     
        
        Page 80 of 597

79
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Low Oil Pressure 
Indicator
●Comes on when you set the 
power mode to ON, and goes off 
when the engine starts.
●Comes on when the engine oil 
pressure is low.
●Comes on while driving  - Immediately 
stop in a safe place.
2 If the Low Oil Pressure Indicator Comes 
On  P. 557
Malfunction 
Indicator Lamp
●Comes on when you set the 
power mode to ON, and goes off 
either when the engine starts, or 
after several seconds if the 
engine did not start. If “readiness 
codes” have not been set, it 
blinks five times before it goes 
off.
●Comes on if there is a problem 
with the emissions control 
systems.
●Blinks when a misfire in the 
engine’s cylinders is detected.
●Readiness codes are part of the on board 
diagnostics for the  emissions control 
systems.
2 Testing of Readiness Codes  P. 579●Comes on while driving - Have your 
vehicle checked by a dealer.
●Blinks while driving  - Stop in a safe place 
where there are no flammable objects. Stop 
the engine for 10 minutes or more, and wait 
for it to cool down.  Then, take your vehicle 
to a dealer.
2 If the Malfunction Indicator Lamp 
Comes On or Blinks P. 558
Charging System 
Indicator
●Comes on when you set the 
power mode to ON, and goes off 
when the engine starts.
●Comes on when there is a 
problem with the charging 
system.
●Comes on while driving  - Turn off the 
climate control system and rear defogger in 
order to reduce electricity consumption.
2 Checking the Battery  P. 525
2 If the Charging System Indicator Comes 
On  P. 557 
     
        
        Page 112 of 597
111
uuGauges and Multi-Information Display uMulti-Information Display
Continued
Instrument Panel
Multi-Information Display
The multi-information display  shows the odometer, trip meter, outside temperature 
indicator, and other gauges. It also displa ys important messages such as warnings 
and other helpful information.
Press the   (information) or  RESET button to change the display.
■Switching the Display
Blank Distance/
Average Fuel Economy/
Range/Instant Fuel 
Economy
Trip A
Tire Pressure for Each TireEngine Oil Life
Turn-by-Turn 
Directions*
RESET 
Button Compass
*
 Button
Distance/
Average Fuel Economy/
Range/Instant Fuel Economy
Trip B
Press the 
Press and hold the 
RESET
Changed two 
seconds later
* Not available on all models 
     
        
        Page 115 of 597
uuGauges and Multi-Information Display uMulti-Information Display
114
Instrument Panel
Shows the estimated distance you can trave l on the remaining fuel. This estimated 
distance is based on the vehicle’s current fuel economy.
Shows the instant fuel economy as  a bar graph in mpg or l/100 km.
Shows each tire’s pressure.
2 Tire Pressure Monitoring System (TPMS) with Tire Fill Assist  P. 416
Shows the remaining oil life and Maintenance MinderTM.
2Maintenance MinderTM P. 491
■Compass
Shows the compass screen.
■Turn-by-Turn Directions
When driving guidance is provided by the navigation system, turn-by-turn directions 
to your destination appear.
2 Refer to the Navigation System Manual
■Range
■Instant Fuel Economy
■Tire Pressure Monitor
■Maintenance MinderTM
■Navigation
Models with navigation system
1Navigation
You can select whether to have the turn-by-turn 
display come on or not dur ing the route guidance.
2 Customized Features  P. 298
2 Refer to the navigation system 
     
        
        Page 389 of 597

uuWhen Driving uStarting the Engine
388
Driving
■To start the engine
When started remotely, the engine automati cally shuts off after 10 minutes of idling 
and/or the brake pedal and  ENGINE START/STOP button have not been pressed 
simultaneously.
To extend the run time for another 10  minutes during the first run, press the   
button, then press and hold the   button. u Some exterior lights flash six times if a 10-minute extension request was 
transmitted successfully.1Remote Engine Start
The engine may not start by  the remote engine start 
if:
•You have disabled a remo te engine start setting 
using the audio/information screen.
•You do not press and hold the   button 
within 5 seconds after the   button is pressed.
•The power mode is not in VEHICLE OFF.•The transmission is in a position other than ( P.
•The hood is open, or any door or the trunk is 
unlocked.
•You have already used the remote twice to start 
the engine.
•Another registered smart entry remote is in the 
vehicle.
•There is any antenna failure.
•The door is unlocked with the built-in key.•The engine oil pressure is low.
•The engine coolant temper ature is extremely high.
•The security system alarm is not set.
Press the   button, then press and hold 
the  button.
Some exterior lights flash once.
LED: Blinks when any button is pressed. Go within the range, 
and try again.
Some exterior lights flash six 
times if the engine starts 
successfully. Exterior lights will not flash if 
the engine does not start. 
     
        
        Page 390 of 597
Continued389
uuWhen Driving uStarting the Engine
Driving
■To stop the engine1Remote Engine Start
The engine may stop whil e it is running if:
•You do not start the vehicl e within 10 minutes of 
starting the engine with the smart entry remote.
•The engine is stopped by using the smart entry 
remote.
•There is any antenna failure.
•The security system alarm is not set.•The door is unlocked with the built-in key.
•The hood is open, or any door, or the trunk is 
unlocked.
•The transmission is in a position other than ( P.
•The engine coolant temper ature is extremely high.
•The battery is low.•The engine oil pressure is low.
•The Malfunction Indicator Lamp comes on if there 
is a problem with the emissions control systems.
Press and hold the   
button for one second.
Go within the range, and try again.
The exterior lights will not flash when the remote is out of 
the smart entry system range.
The engine will not stop.
The exterior lights flash once if the engine stops 
successfully. 
     
        
        Page 487 of 597

486
Driving
Fuel Economy and CO2 Emissions
Improving Fuel Economy and Reducing CO2 
Emissions
Achieving fuel economy and reducing CO2 emissions is dependent on several 
factors, including driving conditions, load weight, idling time, driving habits, and 
vehicle condition. Depending on these and other factors, you may not achieve the 
rated fuel economy of this vehicle.
You can optimize your fuel economy with  proper maintenance of your vehicle. 
Always maintain your vehicle in accord ance with the messages displayed on the 
multi-information display.
• Use engine oil with the viscosity recommended.
2 Recommended Engine Oil P. 499
•Maintain the specified tire pressure.
• Do not load the vehicl e with excess cargo.
• Keep your vehicle clean. A buildup of snow or mud on your vehicle’s underside 
adds weight and increases wind resistance.
■Maintenance and Fuel Economy
1Improving Fuel Economy and Reducing CO2 Emissions
Direct calculation is the recommended method to 
determine actual fuel consumed while driving.
In Canada, posted fuel  economy numbers are 
established following a simulated test. For more 
information on how this test  is performed, please visit 
https://www.nrcan.gc.ca  and search for “fuel 
consumption testing” in the search field at the top of 
the page.
Miles driven Gallons of 
fuel Miles per 
Gallon
100 Liters of 
fuel Kilometers 
driven L per 100 km