2021 HONDA CLARITY PLUG-IN wiper blades

Contents
This owner’s manual should be considered a permanent part of the
vehicle and should remain with the vehicle when it is sold.
This owner’s manual covers all models of your vehicle. You may find
descriptions of equipment and features that are not on your
particular model.
Images throughout this owner’s manu al (including the front cover)
represent features and equipment that are available on some, but
not all, models. Your particular mo del may not have some of these
features.
This owner’s manual is for vehicles sold in the United States and
Canada.
The information and specifications in cluded in this publication were
in effect at the time of approval for printing. Honda Motor Co., Ltd.
reserves the right, however, to discontinue or change specifications
or design at any time without notice and without incurring any
obligation.2 Safe Driving P. 41
For Safe Driving P. 42 Seat Belts P. 47 Airbags P. 54
2Instrument Panel P. 87
Indicators P. 88 Gauges and Driver Information Interface P. 123
2Controls P. 137
Clock P. 138 Locking and Unlocking the Doors P. 139
Operating the Switches Ar ound the Steering Wheel P. 160
Interior Lights/Interior Convenience Items P. 185
2 Features P. 205
Audio System P. 206 Audio System Basic Operation P. 212
Customized Features P. 308 HomeLink® Universal Transceiver* P. 336
2 Driving P. 373
Before Driving P. 374 Towing a Trailer P. 379
Multi-View Rear Camera P. 455 Refueling P. 457
2 Maintenance P. 477
Before Performing Maintenance P. 478 Maintenance MinderTM P. 481
Checking and Maintaining Wiper Blades P. 502
Climate Control System Main tenance P. 517 Cleaning P. 519
2Handling the Unexpected P. 527
If a Tire Goes Flat P. 528 Handling of the Jack P. 540
Indicator, Coming On/Blinking P. 551
If You Cannot Unlock the Fuel Fill Door P. 568
2 Information P. 571
Specifications P. 572 Identification Numbers P. 574
Emissions Testing P. 577 Warranty Coverages P. 578
21 CLARITY PHEV CSS-31TRW6300.book 4 ページ ２０２０年５月１９日　火曜日　午前１０時 ４６分

35
Quick Reference Guide
Maintenance (P 477)
Under the Hood (P 486)
●Check engine oil, coolants and windshield washer fluid. Add
when necessary.
●Check brake fluid.●Check the 12-volt battery condition monthly.
aPull the hood release handle under the corner of the
dashboard.
bLocate the hood latch lever, push it to the side, and then
raise the hood. Once you have raised the hood slightly, you
can release the lever.
cWhen finished, close the hood and make sure it is firmly
locked in place.
Lights (P 500)
●Inspect all lights regularly.
Wiper Blades (P 502)
●Replace blades if they leave streaks
across the windshield.
Tires (P 505)
●Inspect tires and wheels regularly.●Check tire pressures regularly.●Install snow tires for winter driving.
21 CLARITY PHEV CSS-31TRW6300.book 35 ページ ２０２０年５月１９日　火曜日　午前１０ 時４６分

168
uuOperating the Switches Around the Steering Wheel uWipers and Washers
Controls
Wipers and Washers
The windshield wipers and washers can be
used when the power mode is in ON.
■MIST
The wipers run at high speed until you release
the lever.
■Wiper switch (OFF, INT, LO, HI)
Move the lever up or down to change the
wiper settings.
■Adjusting wiper operation
Turn the adjustment ring to adjust the wiper
operation.
■Washer
Sprays while you pull the lever toward you.
When you release the lever for more than one
second, the spray stops, the wipers sweep two
or three more times to clear the windshield,
then stop.
■Windshield Wipers/Washers1 Wipers and Washers
NOTICE
Do not use the wipers when the windshield is dry.
The windshield will get sc ratched, or the rubber
blades will get damaged.
Turn the washers off if no washer fluid comes out.
The pump may get damaged.
When the wiper motor is kept running under heavy
load for extended periods of time, this protection
feature is activated, and the wiper speed may
decrease or motor operat ion may stop temporarily.
This function will be canceled within a few minutes
once the load has been reduced; the wiper operation
returns to normal.
If the vehicle speeds up while the wipers are
operating intermittently, the length of the wipe
interval shortens.
When the vehicle speeds up, the wiper operation’s
shortest delay setting ( ) and the LO setting become
the same.
NOTICE
In cold weather, the blades may freeze to the
windshield.
Operating the wipers in th is condition may damage
the wipers. Use the defroster to warm the
windshield, then turn the wipers on.
MIST
OFF
LO: Low speed wipe
HI : High speed wipe Pull to
use
washer.
INT
Intermittent Time
Adjustment Ring
Lower speed, fewer sweeps
Higher speed, more sweeps
21 CLARITY PHEV CSS-31TRW6300.book 168 ページ ２０２０年５月１９日　火曜日　午前１０時４６分

477
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 478
Safety When Performing Maintenance ..479Parts and Fluids Used in Maintenance Service ........................................... 480
Maintenance Minder
TM..................... 481
Maintenance Under the Hood Maintenance Items Under the Hood .. 486
Opening the Hood ........................... 487
Recommended Engine Oil ................ 488
Oil Check ......................................... 489
Adding Engine Oil ............................ 490
Changing the Engine Oil and Oil Filter ...491 Engine Coolant ................................ 494
Cooling System ................................ 496
Transmission Fluid ............................ 498
Brake Fluid ....................................... 498
Refilling Window Washer Fluid......... 499
Replacing Light Bulbs ....................... 500Checking and Maintaining Wiper
Blades .......................................... 502
Checking and Maintaining Tires
Checking Tires ................................. 505
Tire and Loading Information Label .. 506
Tire Labeling .................................... 506
DOT Tire Quality Grading (U.S. Vehicles).. 508
Wear Indicators ............................... 510
Tire Service Life ................................ 510
Tire and Wheel Replacement ........... 511
Tire Rotation .................................... 512
Winter Tires ..................................... 513
12-Volt Battery ................................. 514
Remote Transmitter Care Replacing the Button Battery ........... 516
Climate Control System Maintenance.. 517CleaningInterior Care .................................... 519
Exterior Care.................................... 521
Accessories and Modifications ........ 525
21 CLARITY PHEV CSS-31TRW6300.book 477 ページ ２０２０年５月１９日　火曜日　午前１０時４６分

478
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle
in good condition. If you become aware of an y abnormality (noise, smell, insufficient
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.
(Note, however, that service at a dealer is not mandatory to keep your warranties in
effect.)
■Daily inspections
Perform inspections before long distance trips, when washing the vehicle, or when
refueling.
■Periodic inspections
• Check the brake fluid level monthly.
2 Brake Fluid P. 498
•Check the tire pressure monthly. Examin e the tread for wear and foreign objects.
2Checking and Maintaining Tires P. 505
•Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 500
•Check the condition of the wiper bl ades at least every six months.
2Checking and Maintaining Wiper Blades P. 502
■Types of Inspection and Maintenance
1Inspection and Maintenance
Maintenance, replacement, or repair of
emissions control devices and systems may be
done by any automotive repair establishment or
individuals using parts that are “certified” to
EPA standards.
According to state and fede ral regulations, failure to
perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all ma intenance services should
be performed in accordan ce with the intervals
indicated by the driver information interface.
2 Maintenance Service Items P. 483
If you want to perform complex maintenance tasks
that require more skills a nd tools, you can purchase a
subscription to the Service Express website at
www.techinfo.honda.com .
2 Authorized Manuals P. 582
If you want to perform ma intenance yourself, make
sure that you have the necessary tools and skills first.
After performing maintenanc e, update the records in
the separate maintenance booklet.
U.S. models
21 CLARITY PHEV CSS-31TRW6300.book 478 ページ ２０２０年５月１９日　火曜日　午前１０時４６分

502
Maintenance
Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces
of the blade may scratch the window glass.
Changing the Wiper Blade Rubber
1. Set the power mode to VEHICLE OFF
(LOCK).
2. While holding the wiper switch in the
MIST position, set the power mode to ON,
then to VEHICLE OFF (LOCK).
u Both wiper arms are set to the
maintenance position as shown in the
image.
3. Lift both wiper arms.
1Changing the Wiper Blade Rubber
NOTICE
Avoid dropping the wiper arm onto the windshield, it
may damage the wiper arm and/or the windshield.
When you raise a wiper arm, you may inadvertently
alter the position of the arm by applying undue force.
If you notice that an arm is not in its proper return
position, active the wipers once and they will
automatically reset. 2 Wipers and Washers P. 168
21 CLARITY PHEV CSS-31TRW6300.book 502 ページ ２０２０年５月１９日　火曜日　午前１０時４６分

503
uuChecking and Maintaining Wiper Blades uChanging the Wiper Blade Rubber
Continued
Maintenance
4. Press up on and hold the tab, then slide
the holder off the wiper arm.
5. Pull the end of the wiper blade in the
direction of the arrow in the image until it
is out of the holder’s end cap.
6. Pull the wiper blade in the opposite
direction to slide it out of the holder.
Tab Holder
Wiper Arm
Wiper
Blade
End Cap at
the bottom
Holder
21 CLARITY PHEV CSS-31TRW6300.book 503 ページ ２０２０年５月１９日　火曜日　午前１０時４６分

504
uuChecking and Maintaining Wiper Blades uChanging the Wiper Blade Rubber
Maintenance
7. Insert the flat side of the new wiper blade
onto the bottom part of the holder. Insert
the blade all the way.
8. Install the end of the wiper blade into the
cap.
9. Slide the holder onto th e wiper arm until it
locks.
10. Lower both wiper arms.
11. Set the power mode to ON and hold the
wiper switch in the MIST position until
both wiper arms return to the standard
position.
Cap Wiper
Blade
Holder
21 CLARITY PHEV CSS-31TRW6300.book 504 ページ ２０２０年５月１９日　火曜日　午前１０時４６分