Page 108 of 711
106
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears when the automatic brake hold system is
turned off.2 Automatic Brake Hold P. 553
●Appears when the automa tic brake hold button is
pressed without wearing the driver’s seat belt.●Fasten the driver’s seat belt.
2 Automatic Brake Hold P. 553
●Appears when the automa tic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.●Press the automatic brake ho ld button with the brake
pedal depressed.
2 Automatic Brake Hold P. 553
●Appears when the parking brake is applied
automatically while it is in operation.2Automatic Brake Hold P. 553
2 Parking Brake P. 549
Continuously
variable
transmission models
Manual transmission
models
21 CIVIC 5D HUM-31TGG6400_01.book 106 ページ 2020年8月28日 金曜日 午後1時 48分
Page 109 of 711
107
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.●Appears while driving - Press the electric parking
brake switch with the brake pedal depressed.
2 Parking Brake P. 549
Continuously
variable
transmission models
Manual transmission
models
21 CIVIC 5D HUM-31TGG6400_01.book 107 ページ 2020年8月28日 金曜日 午後1時 48分
Page 115 of 711

113
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears when the shift lever is moved into any
position other than
( D or (S while ACC is in
operation.
●ACC has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow* P. 501
●Appears when pressing the –/SET button while the
shift lever is in any position other than
( D or (S.
●ACC cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow* P. 501
●Appears when pressing the –/SET button while the
vehicle is moving and the brake pedal is depressed.●ACC cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow* P. 501
2 Adaptive Cruise Control (ACC)* P. 518
Continuously
variable
transmission models
Continuously
variable
transmission models
Continuously
variable
transmission models
Manual transmission
models
* Not available on all models
21 CIVIC 5D HUM-31TGG6400_01.book 113 ページ 2020年8月28日 金曜日 午後1時 48分
Page 116 of 711
114
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears if ACC is canceled while your vehicle is
automatically stopped by ACC.●Immediately depress the brake pedal.
●Appears when pressing the RES/+ or –/SET button
while the vehicle is moving and the clutch pedal is
depressed.●ACC cannot be set.
2 Adaptive Cruise Control (ACC)* P. 518
●Appears when the clutch pedal is depressed while
ACC is in operation.●ACC has been automatically canceled.
2 Adaptive Cruise Control (ACC)* P. 518
Continuously
variable
transmission models
Manual transmission
models
Manual transmission
models
* Not available on all models
21 CIVIC 5D HUM-31TGG6400_01.book 114 ページ 2020年8月28日 金曜日 午後1時 48分
Page 119 of 711
117
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears after you set the power mode to
ACCESSORY or ON.
●Appears after you unlock and open the driver’s
door.2 Starting the Engine P. 454
●Appears when the steering wheel is locked.●Move the steering wheel left and right while pressing the
ENGINE START/STOP button.
Models with smart entry system
Continuously
variable
transmission models
Manual transmission
models
Canadian models
Canadian models
21 CIVIC 5D HUM-31TGG6400_01.book 117 ページ 2020年8月28日 金曜日 午後1時 48分
Page 120 of 711

118
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears if you push the ENGINE START/STOP
button to turn the engine off without the shift lever
in
(P.
●Move the shift lever to (P. The power mode changes to
VEHICLE OFF.
●Move the shift lever to (P, then press the ENGINE
START/STOP button twice.
●Appears when the power mode is in ACCESSORY.
—
●Appears after the driver’s door is opened when the
power mode is in ACCESSORY.●Change the power mode to VEHICLE OFF.
2 ENGINE START/STOP Button* P. 172
●Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.●Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
2Smart Entry Remote Reminder P. 174
●Appears when the smart entry remote battery
becomes weak.
2Replacing the Button Battery P. 622
Continuously
variable
transmission modelsU.S. models
Canadian models
* Not available on all models
21 CIVIC 5D HUM-31TGG6400_01.book 118 ページ 2020年8月28日 金曜日 午後1時 48分
Page 121 of 711

119
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
●Appears if the smart entry remote battery is too
weak to start the engine or the key is not within
operating range to start the engine.
A beeper sounds six times.●Bring the back of the smart entry remote into contact
with the ENGINE START/STOP button.
2If the Smart Entry Remote Battery is Weak P. 660
●Appears when the starter system has a problem.●As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while pressing
the brake pedal and clutch pedal (manual transmission
only), manually start the engine.
Have your vehicle checked by a dealer.
●Appears as soon as a problem is detected in the
smart entry system or push button starting system.●Appears constantly - Have your vehicle checked by a
dealer.
U.S.
*
Canada
* Not available on all models
21 CIVIC 5D HUM-31TGG6400_01.book 119 ページ 2020年8月28日 金曜日 午後1時 48分
Page 136 of 711
uuGauges and Driver Information Interface uDriver Information Interface
134
Instrument Panel
Use the driver information interfac e to customize certain features.
■How to customize
Select the Vehicle Settings screen by pressing the button while the ignition
switch is in ON
(w, and the vehicle is at a complete stop. Select Vehicle Settings,
then press the ENTER button.
■Customized Features
Models with color audio system1Customized Features
To customize other features, press the /
button.
2 List of customizable options P. 137
2 Example of customization settings P. 141
Put the transmission into
( P before you attempt to
change any customized setting.
34
ENTER Button
Press to set your selection.
Button
Press to go to Vehicle Menu. Button
Press to scroll upwards.3
Button
Press to scroll downwards.4
Driver information interface:
Goes to Vehicle Settings .
21 CIVIC 5D HUM-31TGG6400_01.book 134 ページ 2020年8月28日 金曜日 午後1時 48分