2021 FORD RANGER homelink

UNIVERSAL GARAGE DOOR
OPENER
HomeLink Wireless Control
System
WARNING: Do not use the system
with any garage door opener that does
not have the safety stop and reverse
feature as required by U.S. Federal
Safety Standards (this includes any
garage door opener manufactured
before April 1, 1982). A garage door
opener which cannot detect an object,
signaling the door to stop and reverse,
does not meet current federal safety
standards. Using a garage door opener
without these features increases the risk
of serious injury or death.
Note: Make sure that the garage door and
security device are free from obstruction
when you are programming. Do not program
the system with the vehicle in the garage.
Note: Make sure you keep the original
remote control transmitter for use in other
vehicles as well as for future system
programming.
Note: We recommend that upon the sale
or lease termination of your vehicle, you
erase the programmed function buttons for
security reasons. See Erasing the Function
Button Codes
later in this section.
Note: You can program a maximum of
three devices. To change or replace any of
the three devices after it has been initially
programmed, you must first erase the
current settings. See Erasing the Function
Button Codes
. The universal garage door opener replaces
the common hand-held garage door
opener with a three-button transmitter
integrated into the driver
’s sun visor.
The system includes two primary features,
a garage door opener and a platform for
remote activation of devices within the
home. You can program garage doors as
well as entry gate operators, security
systems, entry door locks and home or
office lighting.
Additional system information can be
found online at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
In-Vehicle Programming
This process is to program your in-vehicle
HomeLink function button with your
hand-held transmitter.
Note: The programming steps below
assume you will be programming HomeLink
that was not previously programmed. If your
HomeLink was previously programmed, you
may need to erase your HomeLink buttons.
See Erasing the Function Button Codes.
Note: Put a new battery in the hand-held
transmitter. This allows for quicker training
and accurate transmission of the
radio-frequency signal.
133
Ranger (TFG) Canada/United States of America, Vehicles Built From: 23-11-2020, MB3J 19A321 AA enUSA, Edition date: 202009, First-Printing Garage Door Opener
(If Equipped)E188211

1.
With your vehicle parked outside of the
garage, switch your ignition to the on
position, but do not start your vehicle.
2. Press and release the function button that you would like to program.
3. Hold your hand-held garage door transmitter 1– 3 in (2–8 cm) away from
the HomeLink button you want to
program.
4. Press and hold the hand-held transmitter button you want to
program while watching the indicator
light on HomeLink. Continue to hold
the hand-held button until the
HomeLink indicator light flashes rapidly
or is continuously on.
Note: You may need to use a different
method if you live in Canada or have
difficulties programming your gate operator
or garage door opener. See
Gate Operator
/ Canadian Programming.
5. Press and hold the HomeLink button you programmed for two seconds, then
release. You may need to do this twice
to activate the door. If your garage door
does not operate, watch the HomeLink
indicator light.
If the indicator light stays on, the
programming is complete. Your device
should activate when the HomeLink
button is pressed and released. If the indicator light flashes rapidly, press
and hold for two seconds and release the
programmed HomeLink button. Repeat
the "press/hold/release" sequence up to
three times to complete the programming
process. If your device still does not
operate, you must program your garage
door. See
Programming Your Garage
Door Opener Motor.
To program additional buttons, repeat
Steps 1 – 4.
For questions or comments, please contact
HomeLink at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
Programming Your Garage Door
Opener Motor
Note: You may need a ladder to reach the
unit and you may need to remove the cover
or lamp lens on your garage door opener. 1. Press the learn button on the garage
door opener motor and then you have
30 seconds to complete the next two
steps.
2. Return to your vehicle.
134
Ranger (TFG) Canada/United States of America, Vehicles Built From: 23-11-2020, MB3J 19A321 AA enUSA, Edition date: 202009, First-Printing Garage Door Opener
(If Equipped)E188212 E142659

3.
Press and hold the function button you
want to program for 2 seconds, then
release. Repeat this step. Depending
on your brand of garage door opener,
you may need to repeat this sequence
a third time.
Gate Operator / Canadian
Programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission –
which may not be long enough for
HomeLink to pick up the signal during
programming. Similar to this Canadian law,
some U.S. gate operators are designed to
“time-out” in the same manner.
Note: If programming a garage door opener
or gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.
1. Press and release, every two seconds,
your hand-held transmitter until the
HomeLink indicator light changes to a
rapidly blinking or continuously on light.
2. Release the hand-held transmitter button.
3. Continue programing HomeLink. See In-Vehicle Programming, Step 4.
Erasing the Function Button Codes
Note: You cannot erase individual buttons. 1. Press and hold the outer two function
buttons simultaneously for
approximately 10 seconds until the
indicator light above the buttons
flashes rapidly.
2. When the indicator light flashes, release the buttons. You erased the
codes for all buttons.
Reprogramming a Single Button
To program a device to a previously trained
button, follow these steps:
1. Press and hold the desired button. Do NOT release the button.
2. The indicator light begins to flash after
20 seconds. Without releasing the
button, follow Step 1 in the
Programming section.
For questions or comments, contact
HomeLink at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
135
Ranger (TFG) Canada/United States of America, Vehicles Built From: 23-11-2020, MB3J 19A321 AA enUSA, Edition date: 202009, First-Printing Garage Door Opener
(If Equipped)E188212 E188213

Information About Uniform Tire Quality
Grading............................................................. 292
Information Contained on the Tire Sidewall........................................................... 295
Temperature A B C............................................ 293
Traction AA A B C............................................... 293
Treadwear.............................................................293
Tire Pressure Monitoring System..........308
Changing Tires With a Tire Pressure
Monitoring System...................................... 309
Understanding Your Tire Pressure Monitoring System ....................................... 310
Tires See: Wheels and Tires...................................... 291
Towing a Trailer..............................................221
Towing Points
................................................238
Towing the Vehicle on Four Wheels...........................................................227
Emergency Towing............................................ 228
Recreational Towing......................................... 228
Towing...............................................................221
Traction Control
.............................................176
Principle of Operation....................................... 176
Trail Control Indicators...............................183
Trail Control....................................................182 Trail Control – Troubleshooting.................... 183
Trail Control – Troubleshooting..............183 Trail Control – Information
Messages.......................................................... 183
Trailer Sway Control
....................................222
Transmission Code Designation.............327
Transmission..................................................160
Transporting the Vehicle...........................238
Type Approvals
............................................454
Radio Frequency Certification for Keys and
Remote Controls........................................... 457
Radio Frequency Certifications for Blind Spot Information System.......................... 456
Radio Frequency Certifications for Body Control Module.............................................. 457
Radio Frequency Certifications for Cruise Control Module.............................................. 457
Radio Frequency Certifications for Passive Anti-Theft System....................................... 455
Radio Frequency Certifications for Radio Transceiver Module...................................... 455
Radio Frequency Certifications for Sync 2.5....................................................................... 455Radio Frequency Certifications for SYNC
3........................................................................\
... 457
Radio Frequency Certifications for Telematic Control Unit............................... 456
Radio Frequency Certifications for Tire Pressure Monitoring Sensor(s)...............454
Radio Frequency Statement for Audio Unit.................................................................... 458
United States of America............................... 457
U
Under Hood Overview...............................264
Under Seat Storage
.....................................140
SuperCab.............................................................. 140
Unique Driving Characteristics.................147
Universal Garage Door Opener................133 HomeLink Wireless Control System............133
USB Port
.........................................................353
Using Adaptive Cruise Control.................191 Automatic Cancellation................................... 194
Blocked Sensor................................................... 196
Canceling the Set Speed................................. 194
Changing the Set Speed.................................. 194
Detection Issues................................................. 195
Following a Vehicle............................................ 192
Hilly Condition Usage........................................ 194
Overriding the Set Speed................................ 193
Resuming the Set Speed................................. 194
Setting the Adaptive Cruise Speed..............192
Setting the Gap Distance................................ 193
Switching Adaptive Cruise Control Off....................................................................... 195
Switching Adaptive Cruise Control On........................................................................\
192
Switching to Normal Cruise Control............197
System Not Available....................................... 196
Using Cruise Control...................................190 Canceling the Set Speed................................ 190
Changing the Set Speed................................. 190
Resuming the Set Speed.................................. 191
Setting the Cruise Speed................................ 190
Switching Cruise Control Off........................... 191
Switching Cruise Control On.......................... 190
Using Four-Wheel Drive.............................164 4WD Indicator Lights........................................ 164
Driving Off-Road With Truck and Utility Vehicles............................................................. 166
470
Ranger (TFG) Canada/United States of America, Vehicles Built From: 23-11-2020, MB3J 19A321 AA enUSA, Edition date: 202009, First-Printing Index