Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
36 Vehicle Care
SS 1LE, and ZL1 Only
Due to low ramp angles on ZL1 and SS 1LE
vehicles, use care when loading the vehicle
onto a flatbed carrier. Front spring spacers
are provided for lifting the front suspension
if more clearance is necessary when towing.
ZL1 1LE Only
Due to the high spring rate and spring
design used on ZL1 1LE vehicles, spring
spacers are not provided. If more clearance
is needed when towing, raise the adjustable
spring seat to lift the front suspension. See
"Strut Spring Seat Adjustment" inTrack
Events and Competitive Driving 012.
Tow Eye Socket
Caution
Improper use of the tow eye can damage
the vehicle. If equipped, use the tow eye
to load a disabled vehicle onto a flatbed
tow truck from a flat road surface, or to
move the vehicle a short distance. Use
caution and low speeds. The transmission
must be in (N) Neutral when moving the
vehicle.
The ZL1 vehicle is equipped with a front tow
eye that can be used to pull the vehicle
onto a flatbed car carrier from a flat road
surface. Do not use the tow eye to pull the
vehicle from snow, mud, or sand.
The tow eye is in the rear compartment
storage area.
To install the tow eye: 1. Locate the tow eye socket through the opening in the grille.
2. Install the tow eye into the socket by turning it clockwise until it stops.
3. When finished, place the tow eye back inthe vehicle.
Appearance Care
Exterior Care
Automatic Car Washes
Do not use automatic car washes. Vehicles
with the ZL1 or the 1LE package (or any
accessory ground effects package) have
reduced ground clearance.
Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
Vehicle Care 37
Caution
Vehicles equipped with an accessory
ground effects package have reduced
ground clearance. Damage can occur in
automatic car washes, when approaching
curbs, or on steep inclines. Do not use
automatic car washes. Approach curbs
and inclines with caution.
Caution
Stepping on the rocker molding could
damage the molding. The repairs would
not be covered by the vehicle warranty.
Do not step on the rocker molding.
Hood Extractor
Caution
Using wax on low gloss black finish
stripes can increase the gloss level and
create a non-uniform finish. Clean low
gloss stripes with soap and water only.
It is not recommended that the ZL1 hood
extractor be waxed, as it will change the
gloss level of the surface. In addition, care
must be used when waxing around the
hood extractor. If a small amount of wax is
applied to the hood extractor it can create
an irregular appearance in the surface of the panel. If wax, debris, or other materials
create stains on the hood extractor, see
your dealer for the recommended cleaner.There is a water deflector on the underside
of the hood extractor. Remove it for track
use only.
Hood Wrap (1LE Only)
Caring for Vehicle Graphics
Wash regularly.
.Wash whenever the car appears dirty.
Contaminants allowed to remain on the
graphic may be more difficult to remove
during cleaning.
.Rinse off as much dirt and grit as possible
with a spray of water.
