2021 AUDI Q2 mmi

Multi Media Interface
Press the
|BACK|
button (7)
ipage
152, Fig. 140
to return to the previous function.
Speller for
letters/numbers

Esnni
33!
ABC DE
FCHI
J
K

•
Schmidt,
area
700 m (D) Ingolstadt,
8504S AUFDERSCHANZ
<=•
700 m (D) Ingolstadt,
85049

CO

rN
IV
rN
•-i

00

Fig.
154 Illustration: Speller for letters/numbers
You can use the speller to enter letters, numbers
and symbols on the MMI. This option is available
while the entry field
(f)
is active
^>Fig.
154.
- To call up/close the speller for letters/num­

bers:
Push the rotary pushbutton upwards/
downwards while the entry field is active. Or:
Select the right control button > Open speller/
Close speller.
- To enter a letter/number: With the selection
line activated, turn the rotary pushbutton
@

^>Fig.
154
to select the desired Letter/number.
Press the rotary pushbutton to confirm the let­
ter/number. Your entry will appear in the entry
field (2). When you have entered all characters,
select and confirm button (1) to switch to the
results list. Or: Push the rotary pushbutton
downwards.
- To enter diacritics (e.g. â, ç, n, ô)*: With the
selection line activated, turn the rotary push­
button to select a letter
@
^>Fig.
154. To open
the corresponding set of diacritics, press and
hold the rotary pushbutton. Turn the rotary
pushbutton to select a diacritic while in the
character selection line
@^>Fig.
154. Press the
rotary pushbutton to apply the diacritic. To
close the set of diacritics without selecting a
character, press and hold the rotary pushbut­
ton again. Or: Select and confirm |âôû|(7)

^>Fig.
154. Select and confirm a diacritic.
- To delete a character: Use the rotary pushbut­
ton to turn the pointer to
OFig.
154, and
then press the rotary pushbutton. To delete all
characters in the entry
field,
select
and
press and hold the rotary pushbutton until all
characters have been deleted.
- To enter a special character: Select and confirm

\M\®*Fig.
154.
flâûl
(7) or
|T23l
(§).
Use the
speller for numbers to select and confirm the
special character desired (such as a hyphen or
full stop).
- Input help: In some cases (such as in the
navi­

gation system*), the system will suggest a

word*
to complete your entry while you are still
making
it@
^Fig.
154. You can confirm the
word by pushing the rotary pushbutton up­
wards.
- Results list: In some cases (such as in the direc­

tory),
the system will switch to the results List
(D
^>Fig.
154 automatically. Select and confirm
a suggestion from the List.
Requirement: The entry field (2)
^>Fig.
154 must
be active.
- To switch between the speller and the MMI
touch
pad*:
The handwriting recognition fea­
ture is automatically activated for the MMI
touch
pad*,
which means you can simply start

writing.

159

Multi Media Interface
Overview of the symbols in the speller
The symbols of the speller for
Letters/numbers

are explained in the following table:


©
®

0

©
©
©
©
©
©
©
©

Symbol / marking

|LlST|orM

Entry field
Results list

•

É

[T&?1

àôû

|123|/|ABC|

.

Character selection
•


Description
To switch to the results list.
The current entry is displayed.
Menu language Arabic: A vertical Line on the
left/right
side of the
cursor indicates where the next character will be inserted.
A list of suggestions for the letters already entered is displayed.
To switch from lower case to upper case letters and vice versa.
Menu language Arabic: To show additional Arabic characters.
To open further speller options, e.g. Close speller, Clear entry field
or Switch to Cyrillic characters
Punctuation and special characters
To display diacritics (e.g. â, ç, n,
ô)
or the Cyrillic alphabet.
Menu language Arabic: To switch between Arabic and Latin charac­

ters.

To switch the speller from letters to numbers and vice versa
To enter a space in the entry
field.

The character selected will be highlighted.
The suggested word* can be accepted by pushing the rotary push­
button upwards.
To delete the character to the left of the cursor.
Menu language Arabic: Note the direction of writing.
Diacritics are not available for every letter.
Search function
Applies to: vehicles with search function

You
can enter
search
terms in any order using
the search function.
The search function is available in the Car*, Ra­

dio*,
Media*, Telephone*, Navigation* and Audi
connect* menus.
Calling up the search function

m
Il

ALW

i

@

Fig-

men

•
Albert, Simon

•
A.binson,
Mary
•
Albom,
Michael

•
Allen, Susan

f
Allen, Toby
155 Illustration:

j

Search function in the

1
1

i

ê

telephone
•
a
m
'
m
•
co

§

•
SeLect:
1MENU|
button
>
desired menu item

(e.g.
Telephone).

•
Turn the rotary pushbutton to the Left until the
entry field
(i)
^>Fig.
155 for the search func­
tion is displayed. Or: Push the rotary pushbut­
ton upwards to call up the entry field
(Î).

The handwriting recognition feature is automati­
cally activated for the MMI touch
pad*,
which
means you can simply start writing.
Searching for an entry

•
Enter one or more search terms in the entry
field in any order. The individual search terms
must be separated by spaces. •
160

Multi Media Interface
The system may make suggestions to complete
your entry* (f)
oFig.
155 depending on
what
you
have entered. Further entries containing the
search terms entered will be displayed in the list
of
results
(2).
If the desired term is not yet displayed, continue
entering Letters until it appears.
The first few letters of the search terms will of­
ten be sufficient to bring up a list of results. In
the Telephone* menu, for example, write the
ini­

tials of the contact you are looking for, separat­
ing them with a space.
Confirming an autocomplete suggestion
Important: An autocomplete suggestion* (J)

•=>F/g.
155
must be displayed.
Menus and symbols

•
When using MMI touch*: Press the rotary
pushbutton.
Using an entry from the results list
Important: At least one entry must be displayed
in the results List (2)
^>Fig.
155.

*•
When using MMI touch*: Turn the rotary push­
button to the right. SeLect an entry from the
list and confirm it.

•
When using the speller: SeLect and confirm

I
LIST
I Qo page
159, Fig. 154. Or: Push the ro­
tary pushbutton downwards. Select an entry
from the list and confirm it.

0
19
Telephone: Call list
Detailed station information Who would you like to call? Preferred image
e.g.
John Smith

•
Mailbox

th,
John 049841123456

®
®l@

Fig.
156 Illustration: Menus and symbols

CO
<
O
rN
IN
rN
t-H
o <
®
©
©

0

©
©
©

Symbol/
marking
Selected option
TMC
Entertainment drawer
Jukebox* import process
Repeat track
Random playback
Arrow
Description
Selected function
Reception of TMC/TMCpro/online traffic information
^>page
225
Information on the media source currently selected or an event

(e.g.
a call) is displayed. Depending on the vehicle's equipment, you
may be able to operate functions (e.g. tuning to a radio station, an­
swering a call) via the open entertainment drawer
^>page
157
Copying audio/video files to the jukebox
•=>page
236
The track currently playing will be repeated
Opage
247
All tracks in the playlist will be played in random order

Opage
247, Random playback
Information can be called up by pressing the rotary pushbutton
when text is highlighted
161

Multi Media Interface
©
©

©

©
©
©
©
©
©

@
@

©

©
©
©
©

Symbol/
marking
Signal strength bars for
telephone
Exclamation mark on the
telephone
Signal strength bars for
data connection*
2C/3C/LTE*
Mute function
Roaming
Import procedure
Options menu*

Bluetooth*

Scrolling bar
Entry field
MMI touch*
Rotary control
Checkbox
Selection list
Battery*
Description
Reception strength for the telephone
Indicates missed calls
Reception strength of the active connection, or

PIN:
Enter
the
SIM PIN code
PUK:
Enter
the PUK code

SIM:
Insert
the
SIM card
Network coverage of the active connection
^>page
203

2G:
GSM
network

3G:
UMTS network

LTE*:
LTE network
Audio source muted
^>page
261
Connected mobile
phone/SIM
card inserted in SIM card reader* or
embedded SIM card has left its mobile network
Import/update of contacts in the directory/call list
Select and confirm specific functions for individual menu items and
make changes to settings.
Bluetooth device connected
•=>page 2371'•=>page
173
Signifies a long list.
You can move within lists by turning the rotary pushbutton
Entries that can be changed using the speller for letters/numbers

^page
159 or the MMI touch
pad*
^page
155
Can be used via the MMI touch pad
Settings for the selected function can be made by turning the rotary
pushbutton
You can switch certain functions on
(vf
or off
•
by pressing the ro­
tary pushbutton.
Settings for the selected function that can be called up by pressing
the rotary pushbutton
Battery charge level of the connected mobile phone during wireless
charging
162

Speech dialogue system
Speech dialogue system
How to use the speech
dialogue system
Applies to: vehicles with speech dialogue system

You
can operate many infotainment functions
conveniently by voice.
Important: The ignition and the MMI system
must be switched on
^>page
152, you must not
be talking on the phone, and the parking aid
must not be active.

•
To switch on: Briefly press the
0
button (J)

^>page
17, Fig. 12/(3)
^>page
18, Fig. 14 on
the multi-function steering wheel and give a
spoken command after the beep signal.

*•
To switch off: Press and hold the
0
button for
several seconds. Or: Press the
0
button.

•
To pause: Say the command Pause. To end the

pause,
press the
S
button.

•
To make a correction: Say the command Cor­

rection.

Input help
The system guides you through the input routine
with cues and messages.
- Input help messages on screen: After the
speech dialogue system is switched on, a selec­
tion of possible commands will be shown. The
command display can be switched on or off as

required.
Select:
|MENU|
button
>
Settings >
left control button > MMI settings
>
Speech
dialogue system.
- Spoken input help
cues:
To have the system
play the commands currently possible, switch
on the speech dialogue system and say Help.
How to help the system understand you
Speak clearly in a normal volume. Speak louder if
you are driving fast.
Speak in a normal tone without long pauses.
Close doors, windows and sun roof* to reduce
background noise. Make sure that passengers are
not talking when you say a command.
Keep the air outlets of the air distribution system
pointed away from the microphone, which is fit­
ted in the vicinity of the front interior lights in
the headliner.
The system should only be operated by the driv­
er, since the handsfree microphone is directed
towards the driver.
Other settings
Refer to
^>page
262.
© No
-The dialogue is paused when an incoming
telephone call is received; you can continue
the dialogue by ignoring the
call.
If
you
an­
swer the
call,
the dialogue will be cancelled.
- No navigation cues* or traffic announce­
ments are played when a dialogue is
run­

ning.

- You can select an entry from a list both via
the speech dialogue system and using the
rotary pushbutton.
- The speech dialogue system does not sup­
port commands in Arabic, Norwegian or
Hungarian.
Notes on the overviews
of commands
Applies to: vehicles with speech dialogue system
The following overviews show you the commands
that you can give to operate the MMI via the
speech dialogue system. •

A WARNING

- Please direct your full attention to the road
at all times! As the driver, you have full re­
sponsibility for the safety of the vehicle and
other road users.
For
this reason, you should
only use the functions in a manner that al­
lows you to maintain control of the vehicle
in all situations - accident risk!
- The speech dialogue system must not be
used in cases of emergency, since the voice
changes in stressful situations. This could
result in a failed or delayed telephone
con­

nection.
Always dial emergency numbers
manually!
164

Speech dialogue system
Alternative commands are separated by the sym­
bol "/"; for example you can say: Telephone /(or)
Navigation /(or) Radio.
Commands that belong together and should be
spoken as a sequence are marked with the sym­
bol ">"; for example you can say: Enter address >
(and subsequently) Enter country.
As a rule, only the main commands are displayed.
However, the system may also recognise some
synonyms. For example, for business address
you can also say work address, office address,
the office or at work.
Commands
Global commands
Applies to: vehicles with speech dialogue system
You can give global commands any time, irre­
spective of the menu currently selected.
Function
Calling up the menu
Having the system play the possible
commands
Telephone functions
Navigation functions*
Calling up the favourites
Selecting an entry from a List
Scrolling through a list
Correcting a command
Switching off the speech dialogue
system
Say:
Telephone / Directory / Navigation / Radio / Media / Audi
con­

nect*/Car/Tone

Help / Help Speech dialogue system / Help Telephone /
Help Navigation / Help Map / Help Radio / Help Media / Help
Audi connect*
Call (XY), e.g.
Call John
Smith /
Enter number / Redial / Directory / Read new text message /
Read new e-mail / Dictate text message
Drive me to (XY) or Navigate to (XY), e.g. Navigate to John
Smith /
Enter address / Stop route guidance / Map / Online destina­

tions*
/ Online destination (XY)*
Favourites
>
follow the directions given by the system
Line (XY)
Next page / Previous page
Correction
Cancel

CO

<
O
rN
IN
rN

00
Telephone
Applies to: vehicles with speech dialogue system and telephone
Important: A mobile phone must be connected
to the MMI
^>page
173, and the Telephone
menu must be open
stable
on page 165.
You may be able to say the following commands
depending on the menu item selected:
Function
Calling a contact from the directory
Dialling a specific number stored

fora
contact
Say:
Call (XY), e.g. Call
John
Smith
Call (XY) business / private / land line / mobile,

e.g.
Call
John
Smith private

165

Speech dialogue system
Please always note the information in the
chapter
<^>page
204, General notes on Audi
connect (infotainment).
Messages - Audi connect (infotainment)
Applies to: vehicles with speech dialogue system and Audi connect (infotainment)
Important
A SIM card with a messaging and data option
must be inserted in the SIM card reader*

<^>page
192.
Alternatively, a SIM card with a data option must
be inserted in the SIM card reader and a mobile
phone with activated MAP (Message Access Pro­
file) must be connected to the MMI
^>page
173.
The declaration of consent must have been ac­
cepted
^page
183.
Function
Text message dictation

E-mail
dictation
Commands for text editing
Having a new message read out
Having a message read out
Replying to an opened text message
Forwarding an opened text message
Correcting an entry
Say:
Dictate text message / Dictate text message to (XY) > follow
the directions given by the system
Dictate e-mail / Dictate e-mail to (XY)
>
follow the directions
given by the system
Read / Continue / Delete / Re-record / Replace with (XY) / Add
recipient /Send
Read new text message / Read new e-mail
Read text message / Read e-mail
Reply
Forward
>
Add recipient / Insert template / Send

No,
I meant (XY)
© Note
- The "Text message dictation" and "E-mail

dictation"
services are not available in all
languages and markets. Your Audi dealer
will be able to provide you with more de­
tailed information.
- For more information on which mobile
phones are supported, please go online

(e.g.
www.audi.com/bluetooth) or contact
an Audi dealer.
- Please always note the information in the
chapter
Opage
204, General notes on Audi
connect (infotainment).

CO

< o rN
IN
rN
t-H
o < 00
Navigation
Applies to: vehicles with speech dialogue system and navigation system
Important: The Navigation menu must have
been opened
•=>
table on page
165.

On vehicles with navigation system (SD card): The
SD card containing the navigation data must be
inserted in the SD card reader
<=s>page
235.
You may be able to say the following commands
to enter a destination, depending on the menu
item selected: •
167

Speech dialogue system

CO

â
rN
IN
rN
•-i

•H
00
The ignition and the MMI system must be switch­
ed on.
You must not be speaking on the phone.
The parking aid and the Audi speech dialogue sys­
tem must not be active.
A mobile phone must be connected to the MMI
system via the Handsfree profile
Opage
173.
The mobile phone connected must feature a
speech dialogue function that can be controlled
externally.

•
To switch
on:
Press and hold the
S
button on
the multi-function steering wheel* and give a
spoken command after the external speech dia­
logue system has been activated.

•
To continue/restart a dialogue: After
a
dia­
logue has been ended, the system remains ac­
tive for
a
short period during which you can
start a new external dialogue at any time. If
necessary, press
the S
button and say a new

command.
Or: SeLect and confirm Continue on
the MMI control console.

•
To switch off: Press and hold the
\2*\
button for
several seconds. Or: Select and confirm Cancel
on the MMI control console.
© Note
- No navigation cues* or traffic announce­
ments* are played when a dialogue is active.

-Thisfunction
depends on the mobile phone
you are using. For further information re­
garding your mobile phone, contact your
mobile network service provider or refer to
the operating instructions
for
your mobile

phone.

- AUDI AG only enables you to access your
mobile phone's speech dialogue system and
accepts no responsibility for the content
and commands of the external speech dia­
logue system.
171