2021 AUDI Q2 warning

Instruments and controls
The driver information system shows information

(D
in several display tabs
(T)
^>Fig.
7.
The equipment installed on your vehicle deter­
mines which of the following tabs are available:
1st tab

2ndtaba)

3rd
tab

4th
tab
5th tab
On-board computer
^>page
19
Driver messages
Radio
•=>page
22
Media
^>page
22
Telephone*
^>page
23
Navigation*
<^>page
24

Map*
<>page
24

a)
This tab is only visible if one or more warning/indicator
lamps or driver messages are displayed.

g) [<_>J
button
- To switch between tabs: Press the button
[<±]

repeatedly until the desired tab is displayed

(e.g.
Radio).

01
VIEW|
button

To change the view: see
Opage
17, Changing
views.

(DEI
button
To return to the previous function level.

©
Control buttons
0
and
[3

To call up/close the selection menu or options
menu
^>page
16.

®
Left thumbwheel
- To select a function in a menu/list: Scroll the
left thumbwheel to the desired function (e.g.
setting a frequency).
- To confirm your selection: Press the left
thumbwheel
(J)
^Fig.
8.
- To zoom in/out of the map: When a map is
shown on the display, scroll the left
thumb­

wheel to make the map scale larger or smaller.
Control buttons
Applies to: vehicles with Audi virtual cockpit

W
180
km A I

Update station
list

mm

Fig.
9 Selection menu and options menu
Left control button
- To call up/close the selection menu: Press the
left control button
OF/g.
9 on the multi-func­
tion steering wheel. You can use the left
thumbwheel to select and confirm a function in
the selection menu (e.g. to select
a
new
wave­

band). •
16

Instruments and controls
- To fast forward/rewind an audio file: Press
and hold
the[^i]or[>>!]
button until the desired
playing position has been reached.

0 B
button
- To call up the user-assigned function: Press
the
S
button on the multi-function steering

wheel.

- To check which function is assigned: Press and
hold
the E
button.
- To change the assigned function: Select:

IMENUJ
button > Car
>
left control button
>
Ve­
hicle settings
>
Steering wheel button.

(D H
button
- To have the last navigation cue repeated:
Press the
H
button while route guidance is ac­

tive.

- To adjust the volume of the navigation cues:
Scroll the right thumbwheel up/down during
route guidance while a navigation cue is being

spoken.

Multi-function steering
wheel
How to use the multi-function steering
wheel

Applies
to: vehicles with analogue instrument cluster

You
can use the multi-function steering wheel to
control the driver information system and
cer­

tain MMI functions and to adjust the volume.

Fig.
13 Left side of multi-function steering wheel

Fig.
14 Right side of multi-function steering wheel
Important: The ignition must be switched on.

(T)
How to use the driver information system
The driver information system shows information
(D
alpage
15, Fig. 7 in several display tabs
(Î)
^>page
15, Fig. 7.
The equipment installed on your vehicle deter­
mines which of the following tabs are available:

1st
tab
2nd
taba)

3rd
tab
4th tab

5th
tab
On-board computer
<^>page
20
Driver messages
Radio
opage
22
Media
•=>page
22
Telephone*
opoge
23
Navigation*
opage
24

a'
This tab is only visible if one or more warning/indicator

lamps
or driver messages are
displayed.

- To switch between tabs: Press the
L±>]
button
repeatedly until the desired tab is displayed.
- To call up/close a menu: Press the
EH
button.
- To select a function in a menu/list: Scroll the
left thumbwheel to the desired function.
- To confirm the selection: Press the left
thumb­

wheel to confirm your selection.
- To return to the previous function level: Press

the
Unbutton.

- To scroll through lists: Scroll the left
thumb­

wheel quickly.

©0]
button
- To answer a
call:
Press the
0
button when
there is an incoming
call.

- To end a
call:
Press the 0 button during a
call.

- To display the call list: Press the 0 button
while no calls are active and there are no in­
coming calls.
18

Instruments and controls

CO

s
rN rN
I-I

00
Street view when route guidance is started
Applies to: vehicles with navigation system and analogue in­
strument cluster

f»
Bayern
3
:OB16a/Inqolstadt

Fig.
18 Example: Lane change in instrument cluster

> 89.9 MHz

Fig.
19 Example: Turn-off in instrument cluster
Important: A destination must have been en­
tered
^>page
208, the route guidance function
must have been started, and the navigation tab
must be displayed.
The following information is displayed on the
driver information system, depending on the
equipment installed in your vehicle:

(T)
Distance to next manoeuvre

@
Distance to destination/stopover
(D Estimated time of arrival
(4) Name of motorway, major road or street you
are driving on. If the symbol
O
is displayed
in front of the street name, you are being di­
rected to turn into the street.
(5) Arrow indicating direction of upcoming
turn-

off
(?) Lane recommendation
(7) If an arrow is displayed, a bar graph will also
appear. The fewer bars are displayed, the
shorter the distance to the turn-off point.
The following functions are available when route
guidance is active:
- To have the last navigation cue repeated:
Press
the S
button.
- To adjust the volume of the navigation cues:
Scroll the right thumbwheel up/down while a
navigation cue is being played.

A
WARNING
The route calculated by the navigation system
is a recommendation of how best to reach a
destination. Pay attention to traffic lights, no-
stopping signs, lane change restrictions,
one­

way streets, etc.

(T)
Note
- Also refer to
^>page
10, Controls at a
glance.
- An exclamation mark
"I"
in front of the
street name indicates that the navigation
data of the MMI system do not contain all
the information on this street or street sec­

tion.
Pay attention to traffic rules such as
one-way streets or pedestrian zones.
Head-up display
Applies to: vehicles with head-up display

Fig.
20 Dashboard: Button for head-up display
The head-up display projects certain warnings
and selected information from driver assist func­

tions*
and the navigation system* into the driv­
er's area of vision.
Switching on/off
• To switch the head-up display on/off, press the

^button.
•
25

Instruments and controls
Height adjustment
The height of the head-up display can be adjus­
ted to your individual requirements.

•
Sit in the correct position in your seat

•=>
page 265.
• Turn the
button to adjust the display.
Settings on infotainment system

•
Select the following on the infotainment sys­

tem:
IMENU|
button > Car
>
left control button
> Driver assist
>
Head-up display.
Display contents
The settings on the infotainment system allow
you to specify which information is shown in the
display. Possible options include navigation mes­
sages*, adaptive cruise control* and camera-
based traffic sign recognition*.
The display of certain information and some of
the red warning lamps cannot be deactivated on
the infotainment system.
Brightness
You can adjust the brightness of the display via
the infotainment system. In addition, the display
brightness is reduced automatically as the
day­

light starts to fade. The basic level of brightness
is determined by the instrument lighting setting

•=>
page 53.
© CAUTION
Do not place any objects over the opening for
the head-up display to avoid scratching the
glass cover.
© Note
- The display may be harder to see in unfav­
ourable light conditions or if
you
are wear­
ing polarised sunglasses.
- To be able to see the display as clearly as
possible, adjust the position of your seat
and the height setting for the head-up dis­
play.
- Notes on cleaning
^tab.
Cleaning the inte­
rior on page 314.
Warning and indicator
Lamps
Description
The warning and indicator lamps light up or flash
in the instrument cluster to indicate functions or

faults.

Some of the warning and indicator lamps may be
accompanied by a driver message. The warning
display will be accompanied by the corresponding
warning chime. The warning/indicator lamps and
driver messages on the instrument
duster
dis­
play can be masked by further displays. You can
have them displayed again on the driver informa­
tion system* by calling up the second tab (driver
messages) via the
\<±\
button on the multi-func­
tion steering wheel. If several malfunctions have

occurred,
you can use the Left thumbwheel to
scroll through them on the display.
Some of the warning lamps may be displayed in
different colours.

âs
Central warning/indicator lamps
If the warning/indicator lamp
|g or pq
lights

up,
observe the additional information on the in­
strument cluster display.

Applies
to: vehicles with monochrome display
If
a
driver message appears and a central warn­
ing [amp
Kfl/central
indicator
lamp^S
lights up,
the central warning/indicator lamp indicates the
priority level of the warning. If
a
white indicator
lamp also appears, the central warning/indicator
lamp indicates its actual colour. For example, if

g
lights up with
H.
read the description for
Overview
When you switch on the ignition, some of the
warning and indicator lamps Light up briefly to
show that the associated systems are working
properly. These systems are marked with a
•/
in
the following tables. If one of these warning/in­
dicator lamps does not light up, there is a fault in
the associated system. •
26

Instruments and controls

t/ï

SQ>

Central warning/indicator Lamp

•=>
page 26,
Audi pre sense*

\^>page
121
Brake system
/
^>page
29

ELectro-mechanical
parking brake

Pipage
30
| Cooling system

>page30
ngine
oil pressure

>page
31
Alternator

opage
31
| Seat belt

^>page
31,
^>page
31
Electro-mechanical power steering

1/

*$page
148
Steering lock

^>page
32
Engine stopped while vehicle is
I moving

^>page
32

Learbox

>page 92
Bonnet

^page
33
Adaptive cruise control*

cépage
113
Emergency assist*

•=>poge
126
AdBlue*

^>page
292
AdBlue*

^>page
292
Yellow indicator lamps

CO

< o rN
IV
rN
t-H
o < 00
Central warning/indicator lamp

^>
page 26,
Brake servo*

^>
page 29
Electronic stabilisation control
(ESC)
•
^>page
33
Electronic stabilisation control
(ESC)
•
^>page
33
Electronic stabilisation control
(ESC)

^>page
145
Anti-lock brake system (ABS)
•/
^>page
33
Safety systems
/
<>page 31

Brake pads

<=>page
33
Electro-mechanical parking brake

•=>page
30
Hill hold assist

<=s>page
33
Tyre
pressure*

*$page
309
Tyre pressure*

^>page
309
Engine management*

^>page
33
Engine management*

^>page
33
Engine management*

tapage
33
Emission control system
/
<=>page
33
Diesel particulate
filter*

^>page
34
Engine speed governing*

Opcrge
34
Engine oil level
(MIN)
^>page
34
Engine oil sensor

^>page
34
Engine warm-up
requested*

opage
34
Battery charge

^>page
31
27

Instruments and controls

^^

CQ
<
O
rN
iv
rN

•-i

00
Hill hold assist

^>page
33
Rear seat belt
/
^>page
31
Rear seat belt
/
^>page
31
Child lock
(electric)*

cépage
46
AdBlue*

^page
292

Kfl I ^
page 122
Rest recommendation*

^>page
110
Speed warning function*

cépage
104
Cruise control system*

^>page
104
Speed limiter*

^>page
106
Park assist*

^>page
139
Park assist*

^>page
139
Adaptive cruise control*

^>page
114
Adaptive cruise control*

tapage
114
Active Lane assist*

tapage
124
Side assist*

tapage
131
Pre sense*
Camera-based traffic sign recogni­

tion*

^>
page 108
Main beam assist*

^>
page 50
Main beam headLights

Pipage
50
(©) Brake system
If the warning Lamp Lights up, there is a fault in
the brake system.
| Stop vehicle and check brake fluid level
Stop the vehicle and check the brake fluid level.
Obtain professional assistance if necessary.
| Warning! Brake servo inoperative!
You need to apply much more force to operate
the brakes if the brake servo fails. Obtain profes­
sional assistance.
| Brakes: fault. Safely stop vehicle
If the warning lamp lights up and the message
appears, there is a fault in the brake servo.
If the ABS indicator lamp
[g]
and ESC indicator
lamp
I^J
light up together with the brake warn­
ing
Lamp||
and this driver message appears,
the ABS, ESC and brake force distribution sys­
tems have failed
•=> A-

Do not drive on. Please seek professional assis­
tance
^A-

| Parking brake system fault! See owner's
manual
- If the warning lamp and the message appear
after you switch on the ignition when the ve­
hicle is stationary, please check whether you
can release the parking brake. If the parking
brake cannot be released you should obtain
professional assistance. If the parking brake
can be released but the message
stilL
appears,
drive to a qualified workshop without delay and
have the fault rectified.
- If the warning lamp and the message appear
while driving, there may be a malfunction in
the parking brake auto release or the emergen­
cy brake functions. You may not be able to ap­
ply or release the parking brake. Do not park
the car on a gradient. Obtain professional assis­

tance.

Brake servo: restricted. You can continue driv­

ing.
Please contact workshop
There is a fault with the brake servo. The brake
servo remains available with reduced capacity.
29

Instruments
and
controls
The brakes
may
perform differently than usual
and
the
brake pedal may vibrate.
Drive
to
a qualified workshop without delay
and

have
the
fault rectified.
A WARNING
- Before opening
the
bonnet and checking
the

brake fluid level, observe
the
warning infor­
mation
on
*$page
295,
Working
on
compo­
nents
in the
engine compartment.
-
If
the brake warning lamp does
not go out,

or
if it
lights up when driving,
the
brake
flu­

id level in
the
reservoir
is too low -
this
may

cause an increased accident risk. Stop
the

vehicle and
do not
drive on. Obtain profes­
sional assistance.
-
If
the brake warning lamp lights
up
togeth­
er with
the
ABS indicator lamp and
the
ESC
indicator lamp, this can mean that
the
con­

trol function
of
the ESC/ABS
is not
working.
Input from
the
functions that stabilise
the

vehicle
is no
longer available. This could
cause
the
tail of
the vehicle
to
skid
side­

ways.
Do not
drive on. Obtain professional
assistance.

(®)/0
Electro-mechanical parking brake
The warning lamp
||
lights
up
when
the
parking
brake
is
applied.
If the warning lamp
||
flashes, insufficient brak­
ing force
has
been applied
or
released. Select
first gear (manual gearbox)
or
position
P
(auto­
matic gearbox)
as an
additional safeguard. Make
sure that
the
warning lamp has gone
out
before
you drive
off.

2J
Parking brake!
There
is
a malfunction
in the
parking brake. Drive
to a qualified workshop soon
and
have
the
fault

rectified.

[ft]
Parking brake auto release: unavailable
If this message appears, press
the
brake pedal
and then release
the
parking brake.
If the warning lamp flashes and
the
message
ap­

pears,
the
brake
may not be
strong enough
to

hold
the
vehicle. The brakes have overheated.
The vehicle can roll away, even
on a
gentle slope.
©J Parking brake is applied
If this message appears, press
the
brake pedal
and then reLease
the
parking brake
as
necessary.
For further information
on the
parking brake
refer
to
^>page
82.

•as
Cooling system

| Switch
off
engine and check coolant level.
See owner's manual
The coolant level
is too low.

Switch
off
the engine and
do not
drive on. Check
the coolant level
^>page
299.

-
If
the coolant level
is too
low, add more coolant

^>page
300. Do not
drive
on
until
the
warning
lamp has gone
out.

| Coolant temperature too high! Let engine
run with vehicle stationary
Let
the
engine cool down
by
running
it at
idling
speed
for
a
few
minutes until
the
warning lamp
goes
out.

-
Do not
drive
on if
the warning lamp does
not

disappear. Obtain professional assistance.

JgJ
Caution:
Vehicle parked
too
steep
A WARNING
- Never open
the
bonnet
if
you
can see
or
hear
steam
or
coolant escaping from
the
engine
compartment; there
is
a risk
of
being
scal­

ded.
Wait until you
can no
longer see
or

hear escaping steam
or
coolant.
-The engine compartment
of
any motor
vehi­

cle
is
a dangerous place. Before carrying
out

any work
in the
engine compartment, switch
off the engine and allow
it to
cool down.
Please observe
the
important safety warn­
ings
^>page
295,
Working
on
components
in
the
engine compartment.
30

Instruments and controls
© CAUTION

CO
<
O
rN
iv
rN
•-i

00
Do not drive on if the warning lamp || lights

up;
otherwise there is a risk of engine dam­

age.

t^
Engine oil pressure
| Switch off engine! Oil pressure too low
Switch off the engine and do not drive on. Check
the engine oil level
^>page
298.
- If the engine oil level is too low, add more oil

tapage
297. Do not drive on until the warning
lamp has gone out.
-If the engine oil level is OK
but
the warning
lamp still lights up, switch off the engine and
do not drive on. Obtain professional assistance.
© Note
The oil pressure warning lamp is not an
indi­

cator for the oil level. The oil level should
therefore be checked regularly.

C3
Alternator/vehicle battery
| Electrical system: fault. Battery is not being
charged
There is an alternator fault or a fault in the
vehi­

cle's electrical system.
Drive to a qualified workshop without delay.
However, you should avoid using electrical equip­
ment that is not absolutely necessary because
this will drain the battery. If the battery charge is
insufficient, obtain professional assistance.

S
Electrical system: fault. Please contact
workshop
Drive to a qualified workshop without delay.
Avoid using electrical equipment that is not abso­
lutely necessary (such as the radio) because this
will drain the battery. If the battery charge is in­
sufficient, obtain professional assistance.

y
Electrical system: low battery charge. Bat­
tery will be charged while driving
Starting reliability may be impaired.
If this message disappears after a while, the ve­
hicle battery will have been sufficiently charged
while driving.
If the message does not disappear again, drive to
a qualified workshop without delay and have the
fault rectified.

2f
Safety systems
The indicator lamp

terns.

monitors the safety sys-

If
the indicator lamp
Ej
lights up or flashes,
there is a malfunction in one of the safety sys­

tems.

Drive to a qualified workshop without delay and
have the fault rectified.

A
WARNING
Have the safety systems examined without
delay; otherwise they may fail to trigger in an
accident - this could result in serious or possi­
bly fatal injury.

A
Front seat belt
The warning lamp|| lights up and does not go
out until the driver's and front passenger's* seat
belts have been fastened. When the vehicle has
gathered speed you will also hear a warning

chime.

Note
For further information on the seat belts

•=>
page 275.

y/4
Rear seat belt
Applies to: vehicles with seat belt warning system (rear seats)
If a rear seat belt is buckled/unbuckled, the cor­
responding indicator Lamp Lights up briefly.

||
- If the indicator lamp lights up briefly, the
corresponding rear seat is not occupied.

|/RI|-
If the indicator lamp lights up briefly,
the rear seat belt has been fastened.
| /
KJ
"
Ifthe
warning lamp flashes, the seat
belt has been unbuckled with the vehicle moving.
31