43
Warning lights on panelMeaningWhat to do
TCT FAULT
The digital warning light switches on when the key is
turned to MAR-ON, but it should switch off after a few
seconds.
The digital warning light flashes (together with a message
in the display and an acoustic signal) to indicate that the
TCT is faulty.
The warning light or symbol switches on in the case of
transmission overheating, after a particularly demanding
use; engine performance is limited in this case.
DOOR OPEN
(where provided)
The digital warning light on the display switches on when
one or more doors are not properly shut. A buzzer will
sound when doors/tailgate are open and the car is moving.
BRAKE PAD WEAR
(where provided)
The digital warning light switches on when the front or
rear brake pads show signs of wear.
The associated message appears on the display.Replace the pad as soon as possible.
ALFA ROMEO CODE SYSTEM FAULT
(where provided)
The digital warning light (or symbol on the display) will
come on (on some versions, with a message on the
display) to indicate an Alfa Romeo CODE system or alarm
fault.Contact a dedicated
Alfa Romeo Dealership as soon as possible.
Contact a dedicated
Alfa Romeo Dealership as soon as possible.
If you need to start the engine in presence of a faulty
gearbox, follow the procedure shown in the
“TCT twin clutch transmission”, paragraph in the “Starting
the engine” section, “Starting and driving” chapter.
103
2436486072
SCHEDULED SERVICING PLAN
1750 Turbo Petrol VERSIONS
Thousands of km
Months
40
12
206080100120
Check battery charge status and possibly recharge
Check tyre conditions/wear and adjust pressure, if necessary
Check operation of lighting system (headlights, direction indicators,
hazard warning lights, luggage compartment, passenger compartment,
glove compartment, instrument panel warning lights, etc.)
Check vehicle fastenings
Check mechanical components fastenings
Check operation of windscreen washer system and adjust jets if necessary
Check position/wear of windscreen wiper blade
Check cleanliness of luggage compartment lock, cleanliness and lubrication of linkages
Visually inspect condition of: exterior bodywork, carbon monocoque, aerodynamic
bottom, pipes and hoses (exhaust, fuel supply system, brakes), rubber elements
(boots, driveshaft boots, sleeves, bushes, etc.)
Check condition and wear of front brake pads and discs,
and operation of pad wear indicator
Check condition and wear of rear brake pads and discs,
and operation of pad wear indicator
Check and, if necessary, top up fluid levels (engine cooling, brakes,
windscreen washer, etc.)
