2021 Alfa Romeo 4C display

33
Some options have a submenu. The menu
can be activated by briefly pressing the
SET/
Nbutton.
The menu includes the following items:
❒ MENU
❒ SPEED BEEP
❒ TRIP B ACTIVATION/DATA
❒ SET TIME
❒ SET DATE
❒ AUTOCLOSE (where provided)
❒ UNIT OF MEASUREMENT
❒ LANGUAGE
❒ WARNING VOLUME
❒ BELT BUZZER/BEEP (may only be
displayed after the SBR system is
deactivated by a dedicated Alfa Romeo
Dealership)
❒ SERVICE
❒ AIRBAG/PASSENGER BAG
❒ DAYTIME RUNNING LIGHTS (where
provided)
❒ EXIT MENU
Selecting an option from the main
menu without a submenu:
❒ press the SET/Nbutton briefly to
select the main menu setting you wish to
change;
❒ press buttons or (with single
presses) to select the new setting;
❒ press the SET/
Nbutton briefly to
save the new setting and go back to the
previous main menu option.
Selecting an option from the main
menu with a submenu:
❒ briefly press the
SET/
Nbutton briefly to see the first
submenu option;
❒ press buttons or (single presses)
to scroll all options in the submenu;
❒ briefly press the
SET/
Nbutton to select the option of
the displayed submenu to access the
respective submenu;
❒ press the buttons or (with single
presses) to select the new setting for the
specific submenu option;
❒ briefly press the SET/
Nbutton to
store the setting and go back to the same
item of the previously selected menu
at the same time.
TRIP COMPUTER
The Trip computer is used to display
information on car operation when the
key is turned to MAR.
This function is characterised by two
separate records, called “Trip A” and
“Trip B”, where the car’s “complete
missions” (journeys) are recorded in a
reciprocally independent manner.
Both memories can be reset: i.e. start of a
new journey.
“Trip A” can be used to display the values
relating to:
❒ Range
❒ Distance travelled
❒ Average consumption
❒ Instantaneous consumption
❒ Average speed
❒ Trip time (driving time).
“Trip B” may be used to display the
figures relating to:
❒ Distance travelled B
❒ Average consumption B
❒ Average speed B
❒ Trip time (driving time).
The “Trip B” function may be excluded.
“Range” and “Instant consumption” values
cannot be reset.

KNOWING THE INSTRUMENT PANEL TOOLS
34
WARNING LIGHTS AND MESSAGES
IMPORTANT The warning light switches on in the instrument panel together with a dedicated message and/or acoustic signal when
applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to
the information contained in the Owner Handbook, which you are advised to read carefully in all cases. Always refer to the information
in this section in the event of a failure indication.
IMPORTANT Failure indications displayed are divided into two categories: very serious and less serious failures. Serious faults are
indicated by a repeated and prolonged warning “cycle”. Less serious faults are indicated by a warning “cycle” with a shorter duration.
The display cycle of both categories can be interrupted. The instrument panel warning light will stay on until the cause of the
malfunction is eliminated.
WARNING LIGHTS ON INSTRUMENT PANEL
Warning lights on panelMeaning What to do
Restore the brake fluid level, then check that the warning
light has switched off.
If the warning light stays on, contact a dedicated Alfa
Romeo Dealership.
Release the handbrake, then check that the warning light
has switched off.
If the warning light stays on, contact a dedicated Alfa
Romeo Dealership.
LOW BRAKE FLUID/HANDBRAKE APPLIED
The warning light switches on when the key is turned to
MAR-ON, but it should switch off after a few seconds.
Low brake fluid level
The warning light turns on when the level of the brake fluid
in the reservoir falls below the minimum level, possibly
due to a leak in the circuit.
Handbrake engaged
The warning light switches on when the handbrake is
engaged.

35
Warning lights on panelMeaning What to do
Drive very carefully to the nearest
Alfa Romeo Dealership
to have the system inspected immediately.
20) 21)
Contact Alfa Romeo Authorized Services if you wish to
permanently deactivate the S.B.R. (Seat Belt Reminder)
system buzzer.
The system can be reactivated using the Set-up Menu.
EBD FAULT
The simultaneous switching on of the x(red) and >
(amber) warning lights with the engine on, indicates either
a failure of the EBD system or that the system is not
available. In this case, the rear wheels may suddenly lock
and the vehicle may swerve when braking sharply.
The display shows the dedicated message.
AIRBAG FAILURE
When the key is turned to MAR, the warning light switches
on, but it should switch off after a few seconds.
The warning light on indicates an airbag system failure.
The display shows the dedicated message.
SEAT BELTS NOT FASTENED
(where provided)
The warning light remains on steadily with the car at
stationary and the driver’s seat belt not correctly
fastened.
The warning light will turn on flashing together with the
buzzer when, with car moving, driver’s seat belt are not
fastened correctly.

KNOWING THE INSTRUMENT PANEL TOOLS
36
Warning lights on panelMeaning What to do
Drive carefully and contact a dedicated
Alfa Romeo Dealership as soon as possible.
ABS FAULT
The warning light switches on when the ignition key is
turned to MAR, but it should switch off after a few
seconds.
The warning light switches on to indicate a system fault.
In this case the braking system maintains its efficiency
unaltered but without the advantage of the ABS system.
The display shows the dedicated message.
PASSENGER SIDE AIRBAG DEACTIVATED
The warning light
“comes on when the front passenger
airbag is deactivated.
With the front passenger airbag enabled, when the
ignition key is turned to MAR, the
“warning light
switches on constantly for about 4 seconds then it should
switch off.
If the warning light flashes, this indicates an airbag
warning light fault.
22)
Drive carefully and contact a dedicated Alfa Romeo
Dealership as soon as possible.

37
Warning lights on panelMeaning What to do
In this case release the accelerator pedal to lower the
engine speed until the warning light stops flashing.
Continue the journey at moderate speed, trying to avoid
driving conditions that may cause further flashing and
contact a dedicated Alfa Romeo Dealership as soon as
possible.
If the Uwarning light flashes, it means that the catalytic
converter may be damaged.
3)
Under these conditions, the vehicle can continue travelling
at moderate speed without demanding excessive effort
from the engine. Prolonged use of the car with the warning
light on constantly may cause damage.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. INJECTION / EOBD SYSTEM FAILURE
In normal conditions, when the ignition key is turned to
MAR the Uwarning light switches on, but it should
switch off as soon as the engine is started.
The operation of the Uwarning light may be checked by
traffic police using appropriate equipment.
Comply with the laws and regulations of the country
where you are driving.
If the Uwarning light stays on or switches on when
driving, it means that the injection system is not working
properly; in particular, if the warning light comes on
constantly, this indicates a malfunction in the
supply/ignition system that could cause excessive
exhaust emissions, a possible loss of performance, poor
driveability and high fuel consumption.
On some versions the display shows the dedicated
message.
The Uwarning light switches off if the malfunction
disappears, but is still stored by the system.

KNOWING THE INSTRUMENT PANEL TOOLS
38
Warning lights on panelMeaningWhat to do
In any situation in which the message is “See manual”, it is
ESSENTIAL to refer to the contents of the “Wheels”
paragraph in the “Technical data” chapter, strictly
complying with the indications that you find there.
Low tyre pressure - See manual
The warning light switches on, together with a dedicated
message on the display, to indicate that the tyre pressure
is lower than the recommended value and/or that slow
pressure loss is occurring. In these circumstances, optimal
tyre duration and fuel consumption may not be
guaranteed.
Should two or more tyres be in the condition mentioned
above, the display will show the indications corresponding
to each tyre in sequence.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. TPMS system fault
The warning light switches on when a fault is detected in
the TPMS.
Should one or more wheels be fitted without sensors, the
display will show a warning message until initial conditions
are restored.IMPORTANT Do not continue driving with one or more flat
tyres as handling may be compromised. Stop the vehicle,
avoiding sharp braking and steering. Repair immediately
using the dedicated kit (see “Repairing a wheel” paragraph
in the “In an emergency” chapter) and contact the
dedicated Alfa Romeo Dealership as soon as possible. TPMS SYSTEM

39
Warning lights on panelMeaningWhat to do
ASR OFF WARNING LIGHT
When the ignition key is turned to MAR, the warning light
switches on, but should switch off as soon as the engine is
started.
The warning light switches on when the ASR function
of the electronic stability control (ESC) system is
deactivated (by selecting “Race” mode).
The ASR warning light goes off.
Contact a dedicated Alfa Romeo Dealership as soon as
possible to have the problem corrected.
Contact a dedicated Alfa Romeo Dealership as soon as
possible. ESC ELECTRONIC STABILITY CONTROL SYSTE
When the ignition key is turned to MAR, the warning light
switches on, but should switch off as soon as the engine is
started.
Intervention by the system is indicated by the flashing of
the warning light: it indicates that the car is in critical
stability and grip conditions.
If the warning light does not switch off, or if it stays on
with the engine running, a failure was found on the ESC
system.
Hill Holder system fault
The digital warning light
*switches on and the display
shows the dedicated message, informing about Hill Start
system failure.

KNOWING THE INSTRUMENT PANEL TOOLS
40
Warning lights on panelMeaningWhat to do
LEFT-HAND DIRECTION INDICATOR
The warning light turns on when the direction indicator
control lever is moved downwards or, together with the
right indicator, when the hazard warning light button is
pressed.
RIGHT-HAND DIRECTION INDICATOR
The warning light switches on when the direction indicator
control stalk is moved upwards or, together with the left
indicator, when the hazard warning light button is
pressed.
MAIN BEAM HEADLIGHTS
This warning light comes on when the main beam
headlights are activated.
SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS
The warning light switches on when the side lights or
dipped headlights are turned on.
FOLLOW ME HOME
The warning light switches on (together with a message
shown on the display) when this device is in use
(see “Follow me home device” paragraph in
“Exterior lights” in the “Knowing your car” chapter).