Axle boots .......................................... 9-37
Checking the spark plugs .................. 9-37
Air filter maintenance.......................... 9-39
Cleaning the air filter case check hoses ................................................ 9-43
Cleaning the spark arrester ................ 9-44
Valve clearance .................................. 9-46
Brakes ................................................ 9-46
Checking the front and rear brake pads.................................................. 9-46
Checking the parking brake pads ...... 9-47
Checking the brake and clutch fluid
levels................................................. 9-47
Brake and clutch fluid replacement ... 9-49
Checking the clutch pedal ................. 9-49
Checking the brake pedal .................. 9-50
Checking the accelerator pedal ......... 9-51
Parking brake lever free play
adjustment........................................ 9-51
Brake light switch adjustment ............ 9-52
Cable inspection and lubrication........ 9-53
Pedal lubrication................................. 9-53
Checking the stabilizer bushes .......... 9-54 Upper and lower arm pivot
lubrication (left and right) ..................9-54
Rear knuckle upper and lower pivot lubrication (left and right) ..................9-55
Drive shaft universal joint
lubrication .........................................9-55
Steering shaft lubrication....................9-56
Wheel removal ....................................9-56
Tire replacement .................................9-57
Wheel installation................................9-58
Battery ................................................9-58
Jump-starting .....................................9-62
Fuse replacement ...............................9-63
Headlights...........................................9-65
Headlight beam adjustment ...............9-66
Brake/tail light .....................................9-66
Troubleshooting ..................................9-66
Troubleshooting charts .......................9-68
CLEANING AND STORAGE ..................10-1 Cleaning..............................................10-1
Storage ...............................................10-2
UB5J7BE0.book Page 3 Tuesday, June 18, 2019 10:07 AM
9-63
9
6. Start the engine. (See page 7-2.)
7. After the engine starts, disconnect thenegative lead of the jumper cable from
the seat frame and charged battery, and
then disconnect the positive lead of the
jumper cable from the charged battery
and the battery in the YXZ1000R.
8. Install the seat cushion and the panel.
EBU35255Fuse replacementThe main fuse, the fuel injection system fuse,
the EPS fuse, and the fuse box are located
under panel A. (See page 9-10.)
1. Jumper cable negative lead
1
1. Main fuse
2. EPS fuse
3. Fuse box
4. Fuel injection system fuse
5. Fuel injection system spare fuse
1 2
3
4
5
UB5J7BE0.book Page 63 Tuesday, June 18, 2019 10:07 AM
