POWER* FRONT SEATS
Use the controls on the outside of the seat to adjust e.g. seat posi- tion and lumbar support *. The two controls that together form the
shape of a seat are used to adjust the seat position. The third, thefour-way control *, is used to adjust lumbar support.
The seat-shaped controls Use the lower section of the control to adjust the height of the seat cushion or move the entire seat. Use the rear section of the controlto adjust backrest tilt. Four-way button *
Adjust the lumbar support * by pressing the four-way control.
–Press up or down to move the lumbar support upward or down- ward.
–Press the front or rear part of the four-way control to increase or decrease the lumbar support. Storing positions
1. Adjust the seat and the door mirrors to the desired positions and
press the M button in the door panel. The indicator light in the
button will illuminate.
2. Press and hold down memory button 1 or 2 within three sec-
onds. An audible signal will sound and the indicator light in the M
button will go out.
To use your stored position:With door open - press one of the memory buttons and release.With door closed - press and hold one of the memory buttons until the seat reaches the stored position.
02
