2020 VAUXHALL CORSA F warning

[x] Cancel search: warning

Page 53 of 227

VAUXHALL CORSA F 2020  Owners Manual Storage51Remove the roof rack when not in
use.Loading information
● Heavy objects in the load compartment should be placed
against the seat backrests. Make
sure that the backrests are
securely engag

Page 55 of 227

VAUXHALL CORSA F 2020  Owners Manual Instruments and controls53Instruments and
controlsControls ....................................... 54
Steering wheel adjustment ........54
Steering wheel controls .............54
Heated steering wheel

Page 59 of 227

VAUXHALL CORSA F 2020  Owners Manual Instruments and controls57Pull lever. Washer fluid is sprayed
onto the windscreen and the wiper
wipes a few times.
Washer fluid  3 165.
Rear window wiper and washer
Rear window wiperOFF:offINT:intermi

Page 60 of 227

VAUXHALL CORSA F 2020  Owners Manual 58Instruments and controls9Warning
The road surface may already be
icy even though the display
indicates a few degrees above 0
°C.
Clock
Date and time are shown in the Info
Display.
The adjustment of

Page 61 of 227

VAUXHALL CORSA F 2020  Owners Manual Instruments and controls59Depending on version, an USB port
may be located next to the Info
Display.
Further USB ports may be located in
the rear console.
The slot below the USB ports on the rear side

Page 63 of 227

VAUXHALL CORSA F 2020  Owners Manual Instruments and controls61Warning lights, gauges
and indicators
Instrument cluster
The following instrument cluster is
available:
Overview
1Turn lights  3 65aSeat belt reminder  3 65dAirbag and belt t

Page 65 of 227

VAUXHALL CORSA F 2020  Owners Manual Instruments and controls63Tachometer
Displays the engine speed.
Drive in a low engine speed range for each gear as much as possible.
A red marker indicates the beginning
of the warning zone of excessi

Page 67 of 227

VAUXHALL CORSA F 2020  Owners Manual Instruments and controls65
● press and hold SET / CLR
● switch on ignition, the distance indication begins a countdown
● when the display indicates  =0,
release  SET / CLR
The symbol  C disappea