OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
26 27
Tire Pressure Monitoring (warning) System (TPMS)
Spare tire & tools
SAFETY & EMERGENCY FEATURES
Star Safety System
™
System reset initialization
1. Push and hold “ SET” button until the
indicator blinks three times.
2. Wait a few minutes to allow initialization to complete.
If tire pressure becomes critically low on any of the tires (excluding \
the spare),
“
” indicator will illuminate. Correctly adjusting tire inflation will turn\
off the light
after a few minutes. If the light does not turn off, have the system che\
cked by your
Toyota dealer.
Refer to the Owner’s Manual for more details.
ANTI-LOCK BRAKE SYSTEM (ABS)
Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine p\
ower, and
Traction Control helps maintain traction on loose gravel and wet, icy, o\
r uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. \
This
transfers power to the wheels that still have traction to help keep you \
on track.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD\
) to help
maintain control and balance when braking. Abrupt stops can cause a vehi\
cle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to \
sudden
stops by redistributing brake force to enhance the braking effectiveness\
of all four
wheels.
All new Toyota vehicles come standard with the Star Safety System
TM, which
combines Anti-lock Braking System (ABS), Brake Assist (BA), Electron\
ic Brake-
force Distribution (EBD), Smart Stop Technology (SST), Traction Cont\
rol (TRAC) and
Vehicle Stability Control (VSC),
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
SMART STOP TECHNOLOGY (SST)
Smart Stop Technology automatically reduces engine power when the accele\
rator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are a\
pplied
firmly for longer than one-half second at speeds greater than five miles\
per hour.
SST doesn’t engage if the brake pedal is depressed before the acceler\
ator pedal,
allowing vehicles to start on a steep hill and safely accelerate without\
rolling
backward.
Refer to the Owner’s Manual for tire changing and jack positioning pr\
ocedures.
TOOL LOCATION
REMOVING THE SPARE TIRE
Tie-down belt
Tool bag
Jack handle
Spare tireJack
29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
28
SAFETY & EMERGENCY FEATURES
Floor mat installation
Always align the Δ marks.
VEHICLE STABILITY CONTROL (VSC)
VSC helps prevent loss of traction during cornering by reducing engine p\
ower and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle i\
s traveling.
When it senses that the front or rear wheels begin to lose traction, VSC\
reduces
engine power and applies braking to selected wheels. This helps restore \
traction
and vehicle control.
Pairing a Bluetooth® Device
** Do not attempt the Bluetooth® Pairing process while driving. **
Setup multimedia system for pairing
1. Press the “SETUP” button if you have Entune® Audio
or press the “Home” button if you have Entune® Audio Plus.
* Please refer page 18 to determine which audio system you have.
2. Select the “Setup” icon in the upper right corner of the displa\
y.
3. Select “Bluetooth”.
Pairing your phone
1. Make sure Bluetooth is ON
2. Select your “Multimedia System Name” from the list.
3. Select “Yes” on the multimedia system.
4. Select the vehicle name Toyota Yaris displayed on your phone. Also, i\
f a PIN#
is required, enter it now.
5. The system displays “Bluetooth pairing was successful”. Select \
“OK”.
6. The system displays connected devices. Select “OK”.
* For more details, go to “http://www.toyota.com/connect/” or see \
the Owner’s
Manual.
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
•
Only
use Toyota floor mats designed for your specific model.
•
Use
only one floor mat at a time, using the retaining hooks to keep the mat in
place.
•
Install
floor mats right side up.
BLUETOOTH® DEVICE PAIRING
