Engine maintenance 7
Fuel tank door release and cap
7
Hood release
7
Indicator symbols
4-5
Instrument cluster
4
Instrument panel
2-3
Instrument panel light control
6
Keyless entry*
6
Air conditioning/heating
14
Audio
18
Automatic transmission
8
Clock
16
Cruise control
12
Door-Back door lock/unlock
8
Door locks-Power
16
Lights & turn signals
9
Manual transmission
8
Multi-Information Display (MID)
14
Parking brake
11
Power outlet
16
Rear view monitor system
15
Seat adjustments-Front
12
Seats Folding-Rear
13
Seats-Head restraints
13
Steering wheel switches
17
Tilt steering wheel
11
USB/AUX port
17
Windows-Power
11
Windshield wipers & washers
101
INDEX
OVERVIEW
FEATURES & OPERATIONS TOYOTA SAFETY SENSE™ C (TSS-C)
SAFETY & EMERGENCY FEATURES
PAIRING A BLUETOOTH
® DEVICE 29
YARIS HB 2018
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North
America, Inc. wish you many years of satisfied driving in your
new Yaris HB.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Yaris HB operati\
ons.
Every Yaris HB owner should review the Owner’s Manual that accompanie\
s
this vehicle.
Pay special attention to the boxed
information highlighted in color throughout
the Owner’s Manual. Each box contains safe operating instructions to \
help you
avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of \
printing.
Toyota reserves the right to make changes at any time without notice.
Auto High Beams (AHB) 24
Lane Departure Alert (LDA)
22-23
Pre-Collision System (PCS)
20-21
Quick overview-
Toyota Safety Sense
TM C (TSS-C) 19
Sensors
19
Doors-Child protector rear door locks
25
Floor mat installation
28
Seat belts
25
Spare tire & tools
26
Star Safety SystemTM 27-28
Tire Pressure Monitoring
(warning) System (TPMS)
26
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
12 13
Seat adjustments-Front
Seats-Head restraints
Driver seatPassenger seat
FEATURES & OPERATIONS
Seats Folding-Rear
1 The set speed may also be cancelled by depressing the brake pedal or the\
clutch
pedal (manual transmission).
2 Unless vehicle speed drops below 10 mph, the set speed may be resumed on\
ce
vehicle exceeds 25 mph.
Refer to the Owner’s Manual for more details.
Cruise control (if equipped)
Seatback angle
Seat position
(forward/backward)
Seat position
(forward/backward)
Seatback lock release
(3-door models)
Height crank
(1) Store
(2) Store
(3) Pull up
(4) Fold down
(6) Pull up
(5) Push
(1) Push
(3) Pull up(2) Lower
(4) Fold down
Resume2/
Increase speed
Set/Decrease speed
Cancel1
System ON/OFF
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
24 25
Auto High Beams (AHB)
TOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
Doors-Child protector rear door locks
Seat belts
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child re\
straint
system, refer to the Owner’s Manual.
Keep as low on
hips as possible
Take up slack
Too high
Moving the lever to downward will allow the door to be opened only from \
the outside.
Rear door
(5-door models only)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
(1)(2)
(1) With the engine switch in IGNITION ON mode and headlight switch tu\
rned to
position, push lever away from you.
(2) Depress the Automatic High Beam “AUTO” switch. The
indicator will come on when the headlights are turned on
automatically to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The
indicator will turn off and the high beam indicator turns on.
Refer to the Owner’s Manual for limitations and more details on this \
system. When all of these conditions are met, high beams will be automatically t\
urned on
(after approximately 1 second):
• Vehicle speed is above approximately 25 mph (40 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned
on.
If any of these conditions occur, high beams will be automatically turne\
d off:
• Vehicle speed drops below approximately 19 mph (30 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead. AHB is a safety system designed to help drivers see more of what’s ah\
ead at nighttime
without dazzling other drivers. When enabled, AHB uses an in-vehicle cam\
era to
help detect the headlights of oncoming vehicles and tail lights of prece\
ding vehicles,
then automatically switches between high and low beams as appropriate to\
provide
the most light possible and enhance forward visibility. By using high be\
ams more
frequently, the system may allow earlier detection of pedestrians and ob\
stacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
