2020 TOYOTA TUNDRA clock

4626-3. Do-it-yourself maintenance
■Front side marker lightsTo allow enough working
space, turn the steering
wheel to the opposite side of
the bulb to be replaced.
Remove the screws and
fender liner clip, and remove
the fender liner.
Turn the steering wheel to the
left when replacing the right side
light bulb, and turn the steering
wheel to the right when replac-
ing the left side light bulb.
Open the fender liner and
turn the bulb base counter-
clockwise.
1
2

4646-3. Do-it-yourself maintenance
■Front fog lights-bulb type (if equipped)To allow enough working
space, turn the steering
wheel to the opposite side of
the bulb to be replaced.
Remove the screws and
fender liner clip, and remove
the fender liner.
Turn the steering wheel to the
left when replacing the right side
light bulb, and turn the steering
wheel to the right when replac-
ing the left side light bulb.
Unplug the connector while
depressing the lock release.
Turn the bulb counterclock-
wise.
1
2
3

4656-3. Do-it-yourself maintenance
6
Maintenance and care
Set the new light bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn it clockwise to set.
Install the connector.
Shake the bulb base gently to
check that it is not loose, turn
the fog lights, on once and visu-
ally confirm that no light is leak-
ing through the mounting.
Reinstall the fender liner and
install the screws and clip.
4
5
6

4666-3. Do-it-yourself maintenance
■Stop/tail and rear side marker lights, back-up lights and rear
turn signal lightsRemove the bolts and rear
combination assembly.
Turn the bulb bases counter-
clockwise.Rear turn signal light
Back-up light
Stop/tail and rear side
marker light
Remove the light bulb. Rear turn signal light
Back-up light
Stop/tail and rear side
marker light
1
2
1
2
3
3
1
2
3

4676-3. Do-it-yourself maintenance
6
Maintenance and care
■License plate lightsTurn the bulb base counter-
clockwise.
Remove the light bulb.
1
2

5097-2. Steps to take in an emergency
7
When trouble arises
Assemble the jack handle
extension as shown.
Insert the end of the jack han-
dle extension into the lowering
screw and turn it counterclock-
wise.
After the tire is lowered com-
pletely to the ground, remove
the holding bracket.
Taking out the spare tire
1
2
3

5157-2. Steps to take in an emergency
7
When trouble arises
Vehicles with aluminum wheels: Remove the center wheel orna-
ment by pushing from the reverse side.
Lay down the tire with the valve
stem facing up and install the
holding bracket, inserting the
claw into the wheel lug nut hole.
Turn the jack handle extension
clockwise to take up slack in
the chain.
Then, check to ensure the claw is
in the wheel lug nut hole and the
holding bracket is centered in the
wheel hub.
Holding bracket
Claw
While raising, secure the tire, tak-
ing care that the tire goes straight
up without catching on any sur-
rounding part, to prevent it from
flying forward during a collision or
sudden braking.
Tightening torque:
34.7 ft·lbf (46.6 N·m, 4.8 kgf·m)
Stowing the flat tire, jack and all tools
1
incorrect
correct
O
1
2

597Alphabetical index
Blind Spot Monitor (BSM) ....... 305
Bluetooth®*
Bottle holders .......................... 372
BrakeFluid ...................................... 420
Parking brake........................ 233
Warning buzzer..................... 483
Warning light ......................... 483
Brake assist ............................. 320
Brake Override System ........... 185
Break-in tips ............................. 186
Brightness control Instrument panel light
control................................. 107
BSM (Blind Spot Monitor) ....... 305 Blind Spot Monitor
function ............................... 309
Rear Cross Traffic Alert function ............................... 312
Camper information ................ 586
Card holder .............................. 364
Care................................... 400, 403 Aluminum wheels.................. 401
Exterior ................................. 400
Interior................................... 403
Seat belts .............................. 404
Cargo capacity ......................... 195
Cargo lamp Light switch ........................... 359
Replacing light bulbs............. 468
Wattage ................................ 548
CD player
*
Certification label ............ 200, 539
Chains....................................... 332
Child restraint system ............... 59
Booster seats, definition ......... 60
Booster seats, installation ....... 69
Convertible seats, definition.... 60 Convertible seats,
installation ............................ 68
Front passenger occupant
classification syst em ............ 53
Infant seats, definition............. 60
Infant seats, installation .......... 67
Installing CRS with LATCH anchors ............ 65
Installing CRS with seat belts...................................... 67
Installing CRS with top tether strap........ 70, 73
Child safety ................................ 58
Airbag precautions.................. 44
Battery precautions............... 525
Child restraint system ............. 59
How your child should wear the seat belt ................. 36
Installing child restraints ......... 63
Moon roof precautions .......... 182
Power back window precautions......................... 178
Power window lock switch .... 172
Power window precautions ... 174
Rear door child-protector ...... 131
Removed wireless remote control battery
precautions......................... 451
Seat belt extender precautions........................... 39
Seat belt precautions .............. 62
Seat heater precautions ....... 355
Child-protectors ...................... 131
Cleaning ........................... 400, 403 Aluminum wheels ................. 401
Exterior ................................. 400
Interior .................................. 403
Seat belts.............................. 404
Clock
*
Compass .................................. 394
C
*: Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER
’S MANUAL”.