41
80,000 miles or 96 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1
Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test
Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs5
Reset tire pressure settings in central information display (CID)
Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_
Brake lines and hoses
_
Coolant level and coolant composition
_
Heater/air conditioning blower motor
_
Horn, headlight flashers
and hazard warning flashers
_
Lighting system
_
Mobility system
6
_
Seat belts
Dealer Service verification:
D
ate:
Mileage:
_
Steering linkage and boots
_
tires
_
vehicle underbody and all other
visible components
_
Warning triangle
_
Wiper and washer system
1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed.
4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the
46
EXPLANATION OF MAINTENANCE ITEMS
Steering Linkage and Boots
With the vehicle stopped, check for
excessive freeplay in the steering wheel.
Inspect the linkage for bending and
damage and the dust boots for deterioration,
cracks and damage. Replace any damaged
parts. Toyota recommends maintenance and
repair be performed by a Toyota dealership
or another qualified service center or
repair shop.
Tires
Check tire pressure and check tires for
damage and uneven wear. If the vehicle
is equipped with a spare tire, check the
condition and pressure of the spare.
Washer System
Check windshield wiper and washer nozzle
positions. For further details, refer to the
“Driving” section of the Owner’s Manual .
Wiper Blades
The wiper blades should not show any
signs of cracking, splitting, wear,
contamination or deformation. The
wiper blades should clear the windshield
without streaking or skipping.
Maintenance Log
MAINTENANCE
