2020 TOYOTA GT86 manual transmission

1
INDEX
Engine maintenance 9
Fuel tank door release & cap 7
Hood release 8
Indicator symbols 5
Instrument cluster 4
Instrument panel 2-3
Instrument panel light control 8
Keyless entry 6
Smart Key system 7
OVERVIEW
FEATURES & OPERATIONS
SAFETY & EMERGENCY FEATURES
Air conditioning/heating 22
Audio 20
Automatic transmission 10
Clock 19
Cruise control 12
Cup/bottle holders 23
Door locks 17
Driving mode select 11
Hill-start Assist Control (HAC) 12
Lights & turn signals 14
Manual transmission 10
Multi-Information Display (MID) 16
Parking brake 10
Power outlets-12V DC 21
Rear view monitor system 13
Seat adjustments-Front 15
Seat heaters 23
Seats-Folding rear 15
Seats-Head restraints 15
Steering lock release 18
Steering wheel switches 17
Tilt & telescopic steering wheel 18
Trunk release 19
USB media port 21
Vehicle Stability Control (VSC)
TRAC OFF switch 13
Windows-Power 17
Windshield wipers & washers 14
Floor mat installation 27
Seat belts 24
Spare tire & tools 25
Star Safety System™ 26-27
Tire Pressure Monitoring
(warning) System (TPMS) 24
Trunk-Internal release 24
PAIRING BLUETOOTH® PHONE FOR THE FIRST TIME 28-29
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES

5
Brake system warning1
Charging system warning1
Automatic headlight leveling system warning
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2020 Owner’s
Manual.
Anti-lock Brake System (ABS) warning1
Airbag SRS warning1
Low fuel level warning1 (yellow)
Cruise control indicator (green/yellow)
Cruise control SET indicator
Low Tire Pressure Warning1
Slip indicator1,3
Smart Key system indicator6
(green/yellow2)
Automatic Transmission fluidtemperature warning6
TRAC OFF indicator1
SNOW indicator4,6
REV (engine RPM) indicator (red)
Upshift/downshift indicator4,6
Shift position indicator5,6
Shift-up indicator5,6
Shift position and shift range indicator4,6
Security indicator
SPORT indicator4,6
Turn signal indicator
TRACK mode indicator
Open door warning6
Master warning1,2,6
AIR BAG ON/OFF indicator
Seat belt reminder (alarm will sound if speed is over 12 mph)
Malfunction/Check Engine indicator1
Low engine oil pressure warning1
Low engine coolant temperature indicator2,6 (blue/red)
Electric power steering system warning1
Fuel tank door position
Front fog light indicator6
Hill-start assist control ON indicator3
Headlight high beam indicator
Low outside temperature indicator6Vehicle Stability Control (VSC) OFF indicator1
1 If the indicator does not turn off within a few seconds of starting the \
engine, there may be a malfunction. Have the vehicle inspected by your Toyota dealer.2 If the indicator flashes, there may be a malfunction. Refer to the Owner\
’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 Vehicle with an automatic transmission.5 Vehicle with a manual transmission.6 If equipped.
Indicator symbols
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES

7
Smart Key system (if equipped)
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
On - All electrical components can be used.
Accessory – Some electrical components can be used.
Off - All systems OFF. Emergency flashers can be used.
NOTE: The Smart Key must be carried to enable the start function. With gear
shift lever in Park and the brake pedal depressed (automatic transmission)/
with the gear shift lever in N and the clutch pedal depressed (manual
transmission), push the “ENGINE START STOP” switch.
Without depressing the brake pedal (automatic transmission)/ the clutc\
h pedal
(manual transmission), pressing the engine switch will change the oper\
ation mode
in succession from:
Fuel tank door release & cap
NOTE: Tighten until one click is heard. If the cap is not tightened enough,
Check Engine “” indicator may illuminate.
Pull up
Store
Turn to open
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES

10
P
R
N
D
M
Park*
Reverse
Neutral
Drive
“M” mode
+ (“M” mode)
- (“M” mode)
+ (“M” mode)
*If equipped
- (“M” mode)
Paddle shifters*
Shift lever
* The engine switch must be in the “ON” position (without Smart K\
ey) / “IGNITION
ON” mode (with Smart Key) and the brake pedal depressed to shift fr\
om Park.
Shift the shift lever to “M” position from “D” position.
+: Upshifting
-: Downshifting
Refer to the Owner’s Manual for more details.
Pull(2) Push
(1) Pull slightly
(3) Lower
SetRelease
“M” (MANUAL) MODE
Automatic transmission (if equipped)
Lift up ring to shift into reverse
Manual transmission (if equipped)
Parking brake
FEATURES & OPERATIONS

11
Normal mode
Sport mode
Use for sporty driving or when driving in mountainous regions with lots \
of curves.
Press this switch and the “SPORT” indicator illuminates.
Snow mode
Use for accelerating and driving on slippery road surfaces such as snow.\
Press this
switch and the “SNOW” indicator illuminates.
To cancel SPORT mode or SNOW mode, press the same side of the switch aga\
in
and it returns to normal driving mode.
Refer to the Owner’s Manual for more details.
There are two types of control modes to accommodate various driving pref\
erences.
Normal mode
Use for secure and smooth normal driving.
“TRACK” mode
Use for the feeling of added control and maneuverability. Press and hold\
this switch
and the “TRACK” and “VSC OFF” indicators illuminate. To canc\
el and go back to
normal mode while in “TRACK” mode, press “TRACK” or “VSC \
OFF” switch again.
Refer to the Owner’s Manual for more details.
Driving mode select
NORMALSPORTSNOW
AUTOMATIC TRANSMISSION (IF EQUIPPED)
AUTOMATIC TRANSMISSION/MANUAL TRANSMISSION/ (IF EQUIPPED)
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES

12
FEATURES & OPERATIONS
Cruise control
1 The set speed may also be cancelled by depressing the brake pedal or the\
clutch
pedal (manual transmission).2 The set speed may be resumed once vehicle speed exceeds 20 mph.
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Set
Hill-start Assist Control (HAC)
Hill-start assist control (HAC) helps to maintain braking force to ass\
ist starting off
forward while facing uphill or starting off backward while facing downhi\
ll. As HAC
is initially disabled, enable the system to make it operable. The enable\
d/disabled
setting will be maintained the next time the engine is started.
The hill-start assist control ON indicator will be illuminated when syst\
em is enabled
and flash while the system is operating.
To enable system, refer to the Owner’s Manual for limitations and mor\
e information.
TURNING SYSTEM ON/OFF
FUNCTIONS

13
Vehicle Stability Control (VSC)/
TRAC OFF switch
The VSC OFF switch can be used to help free a stuck vehicle in surroundi\
ngs like
mud, dirt or snow. While the vehicle is stopped, press switch to disable\
the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at l\
east 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
Rear view monitor system
The rear view monitor system displays an image of the view from the bump\
er of
the rear area of the vehicle. The camera for the rear view monitor syste\
m is located
above the license plate.
The rear view image will be displayed on the rear view monitor after the\
shift lever
is shifted to R.
Refer to the Owner‘s Manual for limitations and more details on this system.
Screen
Automatic transmission
Manual transmission
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES

16
Multi-Information Display (MID)
Push “ODO TRIP” to change information in the following:
(1) Odometer
(2) Trip meter
(3) Setting screen for the shift position indicator and shift-up indic\
ator (manual
transmission)
Push “DISP” to change information in the following:
(1) Outside temperature
(2) Current fuel consumption
(3) Average fuel consumption
(4) Setting screen for the REV (engine RPM) indicator*
* Only displayed when the vehicle is stopped.
For more details, refer to the Owner’s Manual.
Menu icons
Content display area
Odometer/trip meter display area
Use meter control switches on the steering wheel to scroll through the f\
ollowing
information screens:
Drive information
Exclusive content for 86 (G-force, Power and torque curve, Stopwatch)\
Setting display
Warning message display
For more details, refer to the Owner’s Manual.
FEATURES & OPERATIONS
MONOCHROME DISPLAY (IF EQUIPPED)
COLOR DISPLAY (IF EQUIPPED)