2020 TOYOTA GT86 ignition

2
Instrument panel
Steering wheel controls
OVERVIEW
Paddle shifters*
Audio controlswitches
Ignition switch* (behind the steering wheel)
Meter control switches*
Headlight, turn signal and
fog light* control
Windshield wiper and washer control
Meters/Multi-Information Display (MID)
Tilt and telescopic steering lock release lever (below the steering wheel)
Hood lock release lever
Fuel tank door release lever
“ENGINE START
STOP” switch*
Trunk opener switch
Instrument panel light control
Cruise control switch

10
P
R
N
D
M
Park*
Reverse
Neutral
Drive
“M” mode
+ (“M” mode)
- (“M” mode)
+ (“M” mode)
*If equipped
- (“M” mode)
Paddle shifters*
Shift lever
* The engine switch must be in the “ON” position (without Smart K\
ey) / “IGNITION
ON” mode (with Smart Key) and the brake pedal depressed to shift fr\
om Park.
Shift the shift lever to “M” position from “D” position.
+: Upshifting
-: Downshifting
Refer to the Owner’s Manual for more details.
Pull(2) Push
(1) Pull slightly
(3) Lower
SetRelease
“M” (MANUAL) MODE
Automatic transmission (if equipped)
Lift up ring to shift into reverse
Manual transmission (if equipped)
Parking brake
FEATURES & OPERATIONS

19
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES
Trunk release
Push and hold
From insideFrom outside (without Smart Key)
Clock
00
The engine switch must be in the “ACC” or “ON” position (wi\
thout Smart Key) /
”ACCESSORY” or IGNITION ON” mode (with Smart Key) for use.
Minute set
Hour setRound off minutes

21
OVERVIEW
FEATURES & OPERATIONS
SAFETY
& EMERGENCY FEATURES
Power outlets-12V DC
USB media port
Connecting a compatible device and cable into the USB media port will su\
pport
charging and music playback through the audio multimedia system.
Refer to the Owner’s Manual for more details.
Designed for car accessories. The engine switch must be in the “ACC”\
or “ON”
position (without Smart Key) / ”ACCESSORY” or “IGNITION ON”\
mode (with Smart
Key) for use.
Console trayGlove box

23
Seat heaters (if equipped)
The engine switch must be in “IGNITION ON” mode for use.
Rapid heating
Normal heating
Removing the cup holder
Cup/bottle holders
Changing the positionChanging the tray size
CUP HOLDERS
BOTTLE HOLDERS (DOOR MOUNTED)
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES