2020 TOYOTA GT86 clutch

7
Smart Key system (if equipped)
START FUNCTION
POWER (WITHOUT STARTING ENGINE)
On - All electrical components can be used.
Accessory – Some electrical components can be used.
Off - All systems OFF. Emergency flashers can be used.
NOTE: The Smart Key must be carried to enable the start function. With gear
shift lever in Park and the brake pedal depressed (automatic transmission)/
with the gear shift lever in N and the clutch pedal depressed (manual
transmission), push the “ENGINE START STOP” switch.
Without depressing the brake pedal (automatic transmission)/ the clutc\
h pedal
(manual transmission), pressing the engine switch will change the oper\
ation mode
in succession from:
Fuel tank door release & cap
NOTE: Tighten until one click is heard. If the cap is not tightened enough,
Check Engine “” indicator may illuminate.
Pull up
Store
Turn to open
OVERVIEW
FEATURES
& OPERATIONS
SAFETY
& EMERGENCY FEATURES

12
FEATURES & OPERATIONS
Cruise control
1 The set speed may also be cancelled by depressing the brake pedal or the\
clutch
pedal (manual transmission).2 The set speed may be resumed once vehicle speed exceeds 20 mph.
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Set
Hill-start Assist Control (HAC)
Hill-start assist control (HAC) helps to maintain braking force to ass\
ist starting off
forward while facing uphill or starting off backward while facing downhi\
ll. As HAC
is initially disabled, enable the system to make it operable. The enable\
d/disabled
setting will be maintained the next time the engine is started.
The hill-start assist control ON indicator will be illuminated when syst\
em is enabled
and flash while the system is operating.
To enable system, refer to the Owner’s Manual for limitations and mor\
e information.
TURNING SYSTEM ON/OFF
FUNCTIONS