38
TOYOTA SAFETY SENSE™
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically t\
urned on
(after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned
on.
• There are few streetlights on the road ahead.
If any of these conditions occur, high beams will be automatically turne\
d off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of what’s ahead at nighttime
while reducing glare for oncoming drivers. When enabled, AHB uses an in-vehicle
camera to help detect the headlights of oncoming vehicles and tail lights of preceding
vehicles, then automatically switches between high and low beams as appropriate to
provide the most light possible and enhance forward visibility. By using high beams
more frequently, the system may allow earlier detection of pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
(2) (1)
(1) Press the “
” switch.
(2) Push lever away from you with the headlight switch is in the “
” or “AUTO”
position.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual
high beam indicator “
” turns on.
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 3812/21/18 8:26 PM
43
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Spare tire & tools (if equipped)
TOOL LOCATION
REMOVE THE SPARE TIRE
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
Remove the luggage floor cover.
Loosen the center fastener that secures the spare tire.
Remove the tool tray.
Wheel nut wrench
Jack
Towing eyelet
(if equipped) Jack handle
Spare tire
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 4312/21/18 8:26 PM
44
SAFETY & EMERGENCY FEATURES
Tire repair kit components
Sticker
Hose Air release cap Rubber stopper
Power plug Air pressure gaugeCompressor switch
Tire repair kit & tools (if equipped)
TOOL LOCATION
Towing eyelet
*If equipped.Emergency tire
puncture repair kitEmergency tire
puncture repair kit
Jack and tools
Refer to the Owner’s Manual for jack positioning and tire changing procedures.
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 4412/21/18 8:26 PM
