2020 TOYOTA COROLLA HYBRID table

12
Driving mode select
Normal mode
Suitable for normal driving.
POWER mode
Controls the hybrid system to provide quick, powerful acceleration. Making it
suitable for when agile driving response is desired, such as when driving on roads
with many curves.
ECO drive mode
Helps the driver accelerate in an eco-friendly manner and improve fuel economy
through moderate throttle characteristics and by controlling the operation of the air
conditioning system (heating/cooling).
Refer to the Owner’s Manual for more details.
EV drive mode
Use EV drive mode when driving short distances to reduce noise late at night in
residential areas or to cut emissions when parking in a small garage or underground
car park.
FEATURES & OPERATIONS
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 1212/21/18 8:26 PM

16
FEATURES & OPERATIONSSeat adjustments-Front
Front Rear outside (adjustable type)
Lock release button
Lock release button
Fold down
Push
MANUAL SEATPOWER SEAT (DRIVER’S SIDE ONLY)
Rear seats-Folding
Seats-Head restraints
Lumber support*
(driver’s side
only)
Lumber support*
(driver’s side only)
Seat position
(forward/backward) Height crank
(driver’s side only)
Seatback angle
Seat position (forward/backward),
cushion (front) angle and height Seatback angle
*If equipped
*If equipped
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 1612/21/18 8:26 PM

18
FEATURES & OPERATIONS
USB media port
By connecting a USB-compatible portable audio device or USB memory stick into
the USB media port, you can listen to music through the vehicle’s speaker system.
AUX port
By inserting an AUX cable into the AUX port, you can listen to music from a
portable audio device through the vehicle’s speaker system while in AUX mode.The power switch must be in the IGNITION ON mode position for use.
Interval wipe
Mist
Slow
Fast
Pull to wash and wipe
Windshield wipers & washers
* Intermittent windshield wiper frequency adjustment Rotate to increase/ decrease wipe frequency. (Available on select grades.)
Refer to the Owner’s Manual for more information.
Adjust frequency*
Pull to wash and wipe
USB media port AUX port
Power outlet-12V DC
USB media/AUX port
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 1812/21/18 8:26 PM

29
LANE DEPARTURE ALERT
LDA function display
Operation display
of steering wheel
operation supportLDA indicator
Lane markers/road edge
(2)
(1)
Lane Departure Alert (LDA) indicator flashes orange when operating.
The LDA function displays when the Multi-Information Display (MID) is switched
to the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when visible lane
markers or the road are detected. A side flashes orange to alert the driver when the
vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane markers or the road
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 2912/21/18 8:26 PM

33
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
The LTA function displays when the Multi-Information Display (MID) is switched
to the driving assist system information screen.
(1) The system displays solid white lines on the LTA indicator when visible lane
markers on the road are detected. A side flashes orange to alert the driver when the
vehicle deviates from its lane.
(2) The system displays outlines on the LTA indicator when lane markers on the road
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LTA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
LANE TRACING ASSIST (CONTINUED)
ADJUSTING LTA ALERT SENSITIVITY
DISABLING STEERING ASSIST
The driver can adjust the sensitivity of the LTA (warning) function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the setting function and then press “.”
(3) Press “
” each time to change the setting.
(4) Press “
” to go back to the menu.
(1) Press “
” switches and select from the Multi-Information Display (MID).
(2) Press “
” switches and select the setting function and then press “.”
(3) Press “
” each time to change the setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
117387_A_MY20_Corolla_HV_QRG_V4_ML_1219_TEXT_R1.indd 3312/21/18 8:26 PM