Page 6 of 52
4
For details, refer to “Indicators and warning lights,” Section 2, 2020 Owner’s
Manual.
Airbag SRS warning1
OVERVIEW
Instrument cluster
Automatic High Beam (AHB)
indicator1
Blind Spot Monitor (BSM)
indicator4
Anti-lock Brake System (ABS)
warning1
AIRBAG ON/OFF indicator Type A1
AIRBAG ON/OFF indicator Type B1
Indicator symbols
TachometerTachometerOutside temperature
Outside temperatureSpeedometer
Speedometer Odometer/trip meter
Odometer/trip meter Shift position
Shift positionFuel gauge
Fuel gauge Multi-information display
Multi-information display Engine coolant temperature display
Engine coolant temperature displayInstrument panel light control
Instrument panel light control
Service indicators and reminders
4.2-inch display
7-inch display
Page 14 of 52
12
Vehicle Stability Control (VSC)/TRAC OFF Switch
FEATURES & OPERATIONS
Driving mode select switches (if equipped)
The VSC OFF switch can be used to help free a stuck vehicle in surroundings like
mud, dirt or snow. While the vehicle is stopped, press switch to disable the TRAC
system.
To disable both VSC and TRAC systems, press and hold the switch for at least 3
seconds.
Refer to the Owner’s Manual for limitations and more details.
Normal -
Suitable for normal driving.
SPORT mode -
Use when a higher level
of response is desired,
such as when driving in
mountainous regions.
ECO MODE -
Helps achieve lower fuel
consumption during trips
that involve frequent
accelerating and braking.
Refer to the Owner’s Manual for more details.
Page 22 of 52
20
FEATURES & OPERATIONS
Multi-Information Display (MID)
w % * 4 1 - " : * ' & 2 6 * 1 1 & %
w % * 4 1 - " : * ' & 2 6 * 1 1 & %
Push “meter control switches” to change information in the following:
Push “meter control switches” to change information in the following:
Refer to the Owner’s Manual for more details.Drive information
Warning messages
Warning messages
Audio system-linked display
Audio system-linked display
Eco-friendly driving information
Settings display
Vehicle information
Driving assist system information
Driving assist system informationSettings display
Indicators
Menu icons
Shift position Outside temperatureSpeed limit display
(with navigation system)
Clock Full-Speed DRCC and
Lane Departure Alert display
Previous screen
Previous screen
Speedometer IndicatorsDisplay area Menu icons Shift position
Indicators
Enter/Select
Enter/Select
Scroll/search
screens
Scroll/search
screens
Odometer/trip
meter control
“ODO/TRIP” switch
Odometer/trip meter display
Display area Odometer/trip
meter control
display
Page 34 of 52
32
TOYOTA SAFETY SENSE™
CHANGING PCS ALERT TIMING
FarMiddle
(default)
Near
1 S F T T i” switches and select or from the Multi-Information Display
. * %
1 S F T T i
” switches and select “Warning sensitivity” from the MID and then
press “
”. The setting screen is displayed.
1 S F T T i
” each time to change the setting. Each time it is pressed, the
response to the PCS alert timing changes as shown above. You can press “
” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and information.Under certain conditions, the PCS system included with the TSS-P package may
also help to detect a pedestrian in front of your vehicle using the in-vehicle camera
and front grille-mounted radar. The in-vehicle camera of PCS detects a potential
pedestrian based on size, profile, and motion of the detected pedestrian. However,
a pedestrian may not be detected depending on the conditions, including the
surrounding brightness and the motion, posture, size, and angle of the potential
detected pedestrian, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION
Page 44 of 52
42
SAFETY & EMERGENCY FEATURES
Safety Connect® (if equipped)
Tire Pressure Monitoring (warning) System (TPMS)
The tire pressure detected by the tire pressure warning system can
C F E J T Q M B Z F E P O U I F N V M U J J O G P S N B U J P O E J T Q M B Z . * %
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
The tire pressure warning system can be selected on “” of the multi-
J O G P S N B U J P O E J T Q M B Z . * %
System rest initialization
4 F M F D U “Vehicle Settings” and then push “” J O D I E J T Q M B Z
“” and then
push and hold “
w J O D I E J T Q M B Z
4 F M F D U i 5 1 8 4 w B O E U I F O Q V T I i
”.
4 F M F D U i 4 F U 1 S F T T V S F w U I F O Q V T I B O E I P M E i
” until the warning light blinks
three times.
Safety Connect is a subscription-based telematics service that uses Global
1 P T J U J P O J O H 4 Z T U F N ( 1 4
E B U B B O E F N C F E E F E D F M M V M B S U F D I O P M P H Z U P Q S P W J E F T B G F U Z
and security features to subscribers. Safety Connect is staffed with live agents at
the Toyota response center, which operates 24 hours per day, 7 days per week.
Services for subscribers include:
• Automatic collision notification
• Stolen vehicle locator
t & N F S H F O D Z B T T J T U B O D F i 4 0 4 w C V U U P O
• Enhanced roadside assistance
For additional information refer to the “Owner’s Manual” or visit www.Toyota.com/
connected-services.
Microphone
LED Indicators“SOS” button
4.2-inch display 7-inch display
Page 46 of 52
44
SAFETY & EMERGENCY FEATURES
Star Safety System™
" / 5 * - 0 $ , # 3 " , & 4 : 4 5 & . " # 4
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
# 3 " , & " 4 4 * 4 5 # "
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
& - & $ 5 3 0 / * $ # 3 " , & ' 0 3 $ & % * 4 5 3 * # 6 5 * 0 / & # %
5 P Z P U B T " # 4 U F D I O P M P H Z I B T & M F D U S P O J D # S B L F G P S D F % J T U S J C V U J P O & # %
U P I F M Q
maintain control and balance when braking. EBD responds to sudden stops by
redistributing brake force to enhance the braking effectiveness of all four wheels. Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
M P D L # S B L J O H 4 Z T U F N " # 4
# S B L F " T T J T U # "
& M F D U S P O J D # S B L F G P S D F % J T U S J C V U J P O
& # %
4 N B S U 4 U P Q 5 F D I O P M P H Z 4 4 5
5 S B D U J P O $ P O U S P M 5 3 " $
B O E 7 F I J D M F 4 U B C J M J U Z
$ P O U S P M 7 4 $
5 H I H U W R W K H 2 Z Q H U
