4517-2. Steps to take in an emergency
7
When trouble arises
C-HR_OM_USA_OM10634U
■Stopping the engine
Set the parking brake, shift the shift lever to P and press the engine switch as
you normally do when stopping the engine.
■ Replacing the key battery
As the above procedure is a temporary measure, it is recommende d that the
electronic key battery be replaced immediately when the battery is depleted.
( P. 383)
■ Changing engine switch modes
Release the brake pedal and press the engine switch in step ab ove. The
engine does not start and modes will be changed each time the s witch is
pressed. ( P. 182)
■ When the electronic key does not work properly
●Make sure that the smart key system and push button start has n ot been
deactivated in the customization setting. If it is off, turn th e function on.
(Customizable features: P. 488)
● Check if battery-saving mode is set. If it is set, cancel the f unction.
( P. 133)
WARNING
■ When using the mechanical key and operating the power windows
Operate the power window after checking to make sure that there is no pos-
sibility of any passenger having any of their body parts caught in the side
window.
Also, do not allow children to operate the mechanical key. It is possible for
children and other passengers to get caught in the power window .
3
4948-2. Customization
C-HR_OM_USA_OM10634U■
Power windows (
P. 155)
*1: Vehicles without a smart key system
*2: Vehicles with a smart key system
■
Turn signal lever ( P. 193)
FunctionDefault settingCustomized
setting
Key*1 or mechanical
key
*2 linked operation
(open)OffOn——O
Key*1 or mechanical
key
*2 linked operation
(close)OffOn——O
Wireless remote con-
trol linked operation
(open only)
OffOn——O
Key*1 or mechanical
key
*2, wireless
remote control linked
operation signal
(buzzer)
OnOff——O
FunctionDefault settingCustomized setting
Times of flashing of
the lane change sig-
nal flashers
3
Off
——O5
7
