2020 TOYOTA C-HR park assist

4167-2. Steps to take in an emergency
C-HR_OM_USA_OM10634U
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Vehicles without a smart key system: Enter the vehicle being to wed
and start the engine.
If the engine does not start, turn the engine switch to the “ON ” position.
Vehicles with a smart key system: Enter the vehicle being towed
and start the engine.
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: P. 1 9 1
■While towing
If the engine is not running, the power assist for the brakes a nd steering will
not function, making steering and braking more difficult.
■ Wheel nut wrench
Wheel nut wrench is installed in the luggage compartment. ( P. 437)
5
6
7

4237-2. Steps to take in an emergency
7
When trouble arises
C-HR_OM_USA_OM10634U
Slip indicatorIndicates a malfunction in:
• The VSC (Vehicle Stability Control) system;
• The TRAC (Traction Control) system; or
• The hill-start assist control system.
The light will flash when the VSC or the TRAC is operat-
ing. ( P. 287)
 Have the vehicle inspected by your Toyota dealer
immediately.
(Yellow)
Brake system warning light
Indicates a malfunction in the electric parking brake
 Have the vehicle inspected by your Toyota dealer
immediately.
*1
(Flashes)
Brake hold operated indicator
Indicates a malfunction in the brake hold system
 Have the vehicle inspected by your Toyota dealer
immediately.
(Flashes or
illuminates)
PCS warning light Indicates a malfunction in the PCS (Pre-Collision System)
or that the system is temporarily unavailable due to the
vehicle being extremely hot/cold, or dirt around a front
sensor, etc. ( P. 241, 431)
 Follow the instructions dis played on the multi-infor-
mation display. (P. 241, 431)
If the PCS (Pre-Collision System) or VSC (Vehicle Stability
Control) system is disabled, the PCS warning light will illu-
minate.
 P. 241
*2
(Flashes) (U.S.A.)
(Flashes) (Canada)
Parking brake indicator (warning buzzer) It is possible that the parking brake is not fully engaged or
released
 Operate the parking brake switch once again.
This light comes on when the parking brake is not
released. If the light turns off after the parking brake is ful ly
released, the system is operating normally.
Low fuel level warning light
Indicates that remaining fuel is approximately 2.0 gal.
(7.5 L, 1.6 Imp.gal.) or less
 Refuel the vehicle.
Warning lightWarning light/Details/Actions

521Alphabetical index
C-HR_OM_USA_OM10634U
Back door ................................. 125
Back-up lightsReplacing light bulb .............. 398
Wattage ................................ 471
Battery ...................................... 355
Checking ............................... 355
If the vehicle has discharged battery ................................ 452
Preparing and checking before winter....................... 292
Replacing .............................. 455
Warning light ......................... 421
Blind Spot Monitor (BSM) ....... 269
Bluetooth
®*
Bottle holders .......................... 313
Brake Fluid ...................................... 469
Parking brake........................ 194
Warning light ......................... 421 Brake assist ............................. 286
Brake Hold ............................... 199
Break-in tips ............................ 165
Brightness control
Instrument panel
light control ........................... 96
BSM (Blind Spot Monitor) ...... 269
B
*: Refer to “MULTIMEDIA OWNER’S MANUAL”.