2020 TOYOTA C-HR key

4537-2. Steps to take in an emergency
7
When trouble arises
C-HR_OM_USA_OM10634U
Connect the jumper cables according to the following procedure:Connect a positive jumper cable clamp to the positive (+) batte ry
terminal on your vehicle.
Connect the clamp on the other end of the positive cable to the
positive (+) battery termi nal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery term i-
nal on the s econd vehicle.
Connect the clamp at the other e nd of the negative cable to a
solid, stationary, unpainted meta llic point away from the battery
and any moving parts, as shown in the illustration.
Start the engine of the second v ehicle. Increase the engine speed
slightly and maintain at that lev el for approximately 5 minutes to
recharge the batter y of your vehicle.
Vehicles with a smart key syst em: Open and close any of the doo rs
of your vehicle with the engine switch off.3
32
4
4
5

4547-2. Steps to take in an emergency
C-HR_OM_USA_OM10634U
Vehicles without a smart key system:
Maintain the engine speed of the second vehicle and turn the
engine switch to the “ON” position, then start the vehicle’s engine.
Vehicles with a smart key system:
Maintain the engine speed of the second vehicle and turn the
engine switch to IGNITION ON m ode, then start the vehicle’s
engine.
Once the vehicle’s engine has st arted, remove the jumper cables in
the exact reverse order from which they were connected.
To install the engine cover, conduct the removal procedure in
reverse. After installing, check that the fixed pins are inserted
securely.
Once the engine starts, have the vehicle inspected at your Toyota
dealer as soon as possible.
■ Starting the engine when t he battery is discharged
The engine cannot be started by push-starting.
■ To prevent battery discharge
●Turn off the headlights and the air conditioning system while the engine is
stopped.
● Turn off any unnecessary electrical components when the vehicle is running
at a low speed for an extended period, such as in heavy traffic .
■ Charging the battery
The electricity stored in the battery will discharge gradually even when the
vehicle is not in use, due to natural discharge and the draining effects of cer-
tain electrical appliances. If the vehicle is left for a long t ime, the battery may
discharge, and the engine may be unable to start. (The battery recharges
automatically during driving.)
■ Precautions when the battery is discharged (vehicles with a sma rt key
system)
● In some cases, it may not be possible to unlock the doors using the smart
entry & start system when the battery is discharged. Use the wi reless
remote control or the mechanical key to lock or unlock the door s.
● The engine may not start on the first attempt after the battery has recharged
but will start normally after the second attempt. This is not a malfunction.
● The engine switch mode is memorized by the vehicle. When the ba ttery is
reconnected, the system will return to the mode it was in befor e the battery
was discharged. Before disconnecting the battery, turn the engine switch off.
If you are unsure what mode the engine switch was in before the battery dis-
charged, be especially careful when reconnecting the battery.
6
7
8

4928-2. Customization
C-HR_OM_USA_OM10634U■
Smart key system* and wireless remote control (
P. 118, 131)
*: If equipped
FunctionDefault settingCustomized
setting
Operation signal
(buzzer)5
Off
—OO
1 to 7
Operation signal
(emergency flashers)OnOff—OO
Unlocking operation
Driver’s door
unlocked in one step, all doors
unlocked in two step
All doors unlocked
in one step—OO
Time elapsed before
the automatic door
lock function is acti-
vated if a door is not
opened after being
unlocked
60 seconds
30 seconds
——O
120 seconds
Open door reminder
buzzer (When locking
the vehicle)
OnOff——O
Locking operation
when door openedOnOff——O

4938-2. Customization
8
Vehicle specifications
C-HR_OM_USA_OM10634U■
Smart key system* (
 P. 131)
*: If equipped
■
Wireless remote control ( P. 118)
■Outside rear view mirrors ( P. 1 5 2 )
FunctionDefault settingCustomized
setting
Smart key systemOnOff—OO
Smart door unlockingDriver’s doorAll the doors—OO
Number of consecu-
tive door lock opera-
tions
2 timesAs many as desired——O
FunctionDefault settingCustomized setting
Wireless remote con-
trolOnOff——O
FunctionDefault settingCustomized
setting
Automatic mirror fold-
ing and extending
operationLinked to the
locking/unlocking of the doorsOff
——OLinked to opera-
tion of the engine switch

4948-2. Customization
C-HR_OM_USA_OM10634U■
Power windows (
P. 155)
*1: Vehicles without a smart key system
*2: Vehicles with a smart key system
■
Turn signal lever ( P. 193)
FunctionDefault settingCustomized
setting
Key*1 or mechanical
key
*2 linked operation
(open)OffOn——O
Key*1 or mechanical
key
*2 linked operation
(close)OffOn——O
Wireless remote con-
trol linked operation
(open only)
OffOn——O
Key*1 or mechanical
key
*2, wireless
remote control linked
operation signal
(buzzer)
OnOff——O
FunctionDefault settingCustomized setting
Times of flashing of
the lane change sig-
nal flashers
3
Off
——O5
7

4978-2. Customization
8
Vehicle specifications
C-HR_OM_USA_OM10634U■
Illumination (
P. 3 0 8 )
*1: Vehicles with a smart key system
*2: If equipped
FunctionDefault settingCustomized
setting
Time elapsed before
the interior lights turn
off15 seconds
Off
—OO7.5 seconds
30 seconds
Operation after the
engine switch is
turned off
OnOff——O
Operation when the
doors are unlockedOnOff——O
Operation when you
approach the vehicle
with the electronic key
on your person
*1
OnOff——O
Outer mirror illumina-
tion
*2OnOff——O
Time elapsed before
the outer mirror illumi-
nation turn off
*215 seconds
Off
——O7.5 seconds
30 seconds
Operation of the outer
mirror illumination
when you approach
the vehicle with the
electronic key on your
person
*1, 2
OnOff——O
Operation of the outer
mirror illumination
when the doors are
unlocked
*2
OnOff——O
Interior lights illumina-
tion controlOnOff——O

516What to do if... (Troubleshooting)
C-HR_OM_USA_OM10634U
What to do if... (Troubleshooting)
●If you lose your keys or mechanical keys, new genuine keys or mechanical
keys can be made by your Toyota dealer. (P. 112)
●If you lose your keys or electronic keys, the risk of vehicle t heft increases
significantly. Contact your Toyota dealer immediately. ( P. 117)
●Is the key battery weak or depleted? (P. 383)
●Vehicles with a smart key system:
Is the engine switch in IGNITION ON mode?
When locking the doors, turn the engine switch off. ( P. 182)
●Vehicles with a smart key system:
Is the electronic key left inside the vehicle?
When locking the doors, make sure that you have the electronic key on
your person.
●The function may not operate properly due to the condition of t he radio
wave. ( P. 113, 134)
●Is the child-protector lock set?
The rear door cannot be opened from inside the vehicle when the lock is
set. Open the rear door from outside and then unlock the child-protector
lock. ( P. 122)
If you have a problem, check the following before contacting
your Toyota dealer.
The doors cannot be locked, unlocked, opened or closed
You lose your keys
The doors cannot be locked or unlocked
The rear door cannot be opened

517What to do if... (Troubleshooting)
C-HR_OM_USA_OM10634U
●Is the shift lever in P? (P. 178)
●Is the steering wheel unlocked? ( P. 179)
●Is the battery discharged? (P. 452)
●Did you press the engine switch while firmly depressing the bra ke pedal?
( P. 181)
●Is the shift lever in P? ( P. 184)
●Is the electronic key anywhere detectable inside the vehicle? ( P. 132)
●Is the steering wheel unlocked? (P. 184)
●Is the electronic key battery weak or depleted?
In this case, the engine can be started in a temporary way. ( P. 450)
●Is the battery discharged? (P. 452)
●Vehicles without a smart key system:
Is the engine switch in the “ON” position?
If you cannot release the shift lever by depressing the brake p edal with the
engine switch in the “ON” position. ( P. 191)
●Vehicles with a smart key system:
Is the engine switch in IGNITION ON mode?
If you cannot release the shift lever by depressing the brake p edal with the
engine switch in IGNITION ON mode. ( P. 191)
If you think something is wrong
The engine does not start (vehicles wi thout a smart key sys-
tem)
The engine does not start (vehicles with a smart key system)
The shift lever cannot be shifted from P even if you depress
the brake pedal