WINDSHIELD WIPERS
To turn on the wipers, press the wiper control
lever down one position for intermittent, two
positions for low speed, or three positions for
high speed. To turn the wipers off, return the
lever to the “OFF” position. For a single wipe,
move the lever up one position.
When the lever is in the intermittent position,
rotate the dial to adjust the operating interval
of the wipers.
Pull the lever toward you to spray washer fluid. The washer will spray until you release the
lever, then wipe twice.
INSTRUMENT PANEL SWITCHES(LOWER LEFT)
1Illumination brightness control (p. 17)
2Trunk Release (p. 26)
km/h - MPH, ODO - TRIP and DISP Buttons
There are three buttons to the left of the
instrument cluster to change the display.
1km/h – MPH:Press this button to change
the digital display from km/h to MPH.
Press again to switch back.
2ODO – TRIP:Press this button to cycle
through the odometer, trip meter A, trip
meter B, the setting screen for the
tachometer needle or the setting screen
for the shift position indicator.
3DISP:For BRZ Premium, press this button to cycle through the outside temperature,
current fuel consumption or average fuel consumption.
CONTROLS
18
