2020 SKODA KAROQ instrument cluster

Instruments and warning lights
Instrument cluster

Display in the digital instrument clusterFig. 34
Display versions / example of the classic display
Display versions (from the left)

Some warning lights can be accompanied by acoustic signals and messages in
the display of the instrument cluster.
After switching on the ignition, some warning lights light up briefly as a func-
tion test. If the tested systems are OK, the corresponding warning lights go
out a few seconds after switching on the ignition or after starting the engine.
Warning lights in the display
Depending on the significance, the warning light

If there is a fault, the error message will appear in the instrument cluster dis-
play. Seek help from a specialist garage.WARNINGThe system is used only for support, thus the driver is not released from his
obligation to manually adjust the main or low beam according to the given
ambient conditions (e.g. in unfavourable lighting and weather conditions, as when passing poorly lit road users, if necessary, when the area in front of
the sensor is covered by an obstacle).
CAUTION
Do not cover the sensor and keep the front screen clean - system functionality
can be impaired.
Note
The setting for the high-beam assistant in Infotainment is stored (depending
on the Infotainment type) in the active user account for personalisation

Graphical driving recommendationsFig. 231
Driving recommendations / travel recommendation detail
The display of the graphical driving recommendations is carried out in the split screen
Manoeuvre
as well as the display of the instrument cluster.
In the split screen
Manoeuvre
the following driving recommendations are shown

FunctionFig. 275
Instrument cluster display: examples of speed limiter status
displays

Fig. 280
Instrument cluster display: examples of ACC status displays

Warning and automatic brakingFig. 285
Instrument cluster display: pre-warning or emergen-
cy braking at low speed