2020 Seat Tarraco service

Operation

v Tr
avel Assist On/Off ››› page 264

v Side Assist On/Off ››› page 268

v Navigation.

v Audio.

v Telephone.

v Vehicle status. ››› page 73
Service Menu In the Service menu various settings can be
adjust
ed depending on the f

eatures.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel. Restart the oil service
Select the
Restore Oil service menu and
f

ollow the instructions on the instrument pan-
el display.
Restart journey data
Select the Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption. Change from one display to another

Operation
Check the date of the current service on the
inf ot
ainment system

Instruments and warning/control lamps
Vehicle information Fig. 67
Schematic representation: Vehicle infor-
mation and st at
us Pressing on 
! Selection
and then on

Vehicle info opens the Vehicle information
menu with the following submenus:
Driving data. The average consump-
tion, average speed, distance travelled,
trip duration and autonomy are shown. It
has 3 memories: “From departure”, “To-
tal calculation” and “From refuelling”
››› page 72.
Vehicle status. The warnings regarding
faults, incidents, memorisation of the
tyre pressure or information of the next
inspection service are displayed. –
–

89

Operation
Opening and closing Set of v ehicl
e keys
Vehicle key Fig. 71
Assignment of buttons on the remote
contr ol k

ey. Fig. 72
Vehicle key with alarm button. Key to the
››

› Fig. 71
,
››› Fig. 72 Unlock the vehicle
Lock the v

ehicle
Unlock only the rear lid. Press the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Folding the key shaft in and out
Alarm button*. Only press in the event of
an emergency! When the alarm button is
pressed, the vehicle's sounds and the turn
signals light up for a short time. Press
again to disconnect.
With the vehicle key the vehicle may be
locked or unlocked remotely ››› page 94
.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ››› page 94
or the battery
changed ››› page 93
.
Different keys belonging to the vehicle may
be used. 1 2
3
4
5 Control lamp on the vehicle key
When a butt
on on the v
ehicle key is pressed,
the control lamp flashes ››› Fig. 71
(arrow)
once briefly, but if the button is held down for
a longer period the control lamp flashes sev-
eral times, such as in convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery ››› page 93
.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle ID number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also
true for keys which are specially cut for the
vehicle.
The vehicle keys or new spare keys can be
obtained from a SEAT Official Service, a spe-
cialised workshop or an approved key service
qualified to create this kind of key.
New keys or spare keys must be synchronised
before use ››› page 94
. WARNING

Infotainment system
Data transfer
SEAT CONNEC T
Intr
oduction To use it, SEAT CONNECT must first be activa-
t
ed online by ent

ering into a SEAT CONNECT
contract with SEAT, S.A. and is subject to a
temporary use limitation depending on the
country.
Both the SEAT CONNECT service portfolios
offered by SEAT and individual services can
be modified, cancelled, deactivated, reacti-
vated, renamed and extended, even without
prior notification.
In https://my.seat you can create the user
account, see the description of services and
more information.
The execution and availability of the SEAT
CONNECT services and service portfolios
may vary depending on the country, as well
as the vehicle, its equipment and connectivi-
ty. Connectivity statuses )
(whit
e) Full connectivit
y, all services active
) (gr
ey) Limit
ed connectivity, some services
may not be av ail
able.
no icon No connectivity, no services availa-
bl
e

. SEAT CONNECT's voice recognition or search
t
echnol

ogy does not recognise or offer re-
sults for all words.
There are SEAT CONNECT services for which
registration is mandatory and others for
which it is not mandatory.
Description of services
Before running SEAT CONNECT services,
read and take into account the description of
the corresponding services. Descriptions are
updated non-periodically and are available
online at https://my.seat.

Data transfer
SEAT CONNECT services and functions
that do not r equir
e activation
The following services also work without the
activation of SEAT CONNECT:

Data transfer
the registration code shown on the Web Por-
t al or in the App
.
Once the infotainment system has processed
the orders by radiofrequency, the accredita-
tion of the ownership will have been comple-
ted. You can control the current status in the
SEAT CONNECT portal. How is ownership accredited?
9.2” Infotainment 2-Key method.
8.25” Infotainment Registration code
SEAT CONNECT portal No, it is not possible
SEAT CONNECT appli-
cation No, it is not possibleIdentity accreditation (SEAT Ident)
Identit
y accr

editation must be done before
you can use SEAT CONNECT services that
are relevant to security, such as the “Remote
Opening” service. Identity accreditation can
be done in two ways:

Infotainment system
the possibility of accessing the data regis-
t er
ed through SEAT CONNECT and control
certain functions of your vehicle.
In the infotainment system you can check if
your vehicle is assigned to a person as the
main user. In this case, you can register your-
self as the main user of the vehicle and thus
automatically delete the previous main user.
Alternatively, through the infotainment sys-
tem you can directly and permanently delete
the previous user as the main user, as well as
put the vehicle in offline mode and thus limit
both the communication of your vehicle with
the SEAT, S.A. data server and the processing
of personal and vehicle data.
Deactivating SEAT CONNECT serv-
ices The following functions are available in the
inf
ot

ainment system to deactivate and acti-
vate SEAT CONNECT services: