2020 Seat Mii electric ESP

Introduction
Thank you f or your trust choosing a SEAT v
e-
hicl
e.
With your new SEAT, you will be able to enjoy
a vehicle with state-of-the-art technology
and top quality features.
We recommend reading this Instruction Man-
ual carefully to learn more about your vehicle
so you can enjoy all its benefits in your daily
driving.
Information about handling is complemented
with instructions regarding the operation and
maintenance of the vehicle in order to ensure
its safety and maintain its value. Moreover, we
want to give you valuable advice and tips to
drive your vehicle efficiently and respecting
the environment.
We wish you safe and enjoyable motoring.
SEAT, S.A.
WARNING
Read and always observe safety infor-
mation concerning the passenger

Operation
Air conditioning
Heating, v entil
ation and
cooling
Intr
oduction The Climatronic
cool
s and dehumidifies the
air. Its optimum performance is achieved with
the windows closed.
To switch a specific function on, press the ap-
propriate button. Press the button again to
switch off the function.
The LED on each control lights up to indicate
that the respective function of a control has
been switched on.
Dust and pollen filter
The dust and pollen filter with its activated
charcoal cartridge serves as a barrier
against impurities in the air taken into the ve-
hicle interior.
The dust and pollen filter must be changed
regularly so that air conditioner performance
is not adversely affected.
If the filter loses efficiency prematurely due to
use in areas with very high levels of air pollu-
tion, the filter must be changed more fre-
quently than stated in the Service Schedule. WARNING
Reduced visibility through the windows in-
creases the risk of serious accidents.

Air conditioning
out. To get the best possible air flow towards
the windo ws, open the corr
esponding diffuser
and t
urn it to the de-icing/demisting position,
where it will lock.
There are other additional, non-adjustable air
vents in the instrument panel, in the footwells
and in the rear area of the passenger com-
partment. Note
Food, medicine and other heat or cold sen-
sitive ob jects shoul

d never be placed in
front of the air outlets as they may be dam-
aged or made unsuitable for use by the air. Air recirculation 
Air recirculation mode prevents the ambient
air fr
om ent
ering the int

erior.
When the outside temperature is very high,
selecting manual air recirculation mode for a
short period refreshes the vehicle interior
more quickly.
For safety reasons, air recirculation mode is
switched off when the button  is pressed or the air distributor is turned to . Switching the manual air recirculation
mode on and off

Operation
Programming a departure time
What is pr ogr
ammed is the desir
ed tempera-
ture in the passenger compartment for the
planned departure time. Starting from the de-
sired temperature, the vehicle calculates the
time necessary to reach it and, therefore, the
time at which the stationary air conditioning
has to be connected. It is possible to sched-
ule up to three departure times.
Maximum cooling or heating power
The maximum cooling or heating power can
be adjusted by the corresponding applica-
tion installed on a mobile phone.

Drive system and driving
When   or  profiles are selected, the
corr esponding inscription

Braking and parking
At high speed and with the windscreen wipers
activ at
ed, the br
ake pads will briefly touch
the brake discs. This takes place, although
unnoticeable to the driver, at regular intervals
to improve the response time of the brakes
when they are wet.
The effectiveness of the brakes can also be
temporarily reduced if the vehicle is driven for
some distance without using the brakes when
there is a lot of salt on the road in winter. The
layer of salt that accumulates on the discs
and pads can be removed by gently apply-
ing the brakes a few times.
Corrosion
There may be a tendency for corrosion to
form on the discs and dirt to build up on the
brake pads if the vehicle is used infrequently
or the brakes are not used very often.
If the brakes are not used frequently, or if rust
has formed on the disks, it is advisable to
clean off the pads and disks by braking firmly
a few times at a moderately high speed

Vehicle maintenance
Problem Solution
No shine de-
spite sober main-
tenance/paint T
reat with suitable wax and ap-
ply paint preserv ativ
e after-
wards if the wax used does not
contain preservative ingredi-
ents
Tanks, e.g. insect
remains, bir d
dr

oppings, tree
sap, road salt Immediately soften with water
and remov
e with a microfibre
cloth
Fat-based dirt,
e.g. cosmetic
pr oducts or
sunscr

een Delete immediately with a neu-
tral soap solution
a)
and a soft
cloth a)
Neutral soap solution: two tablespoons maximum in
1 litr e of w
at

er
Carbon fibre parts Problem Solution
Dirt Clean the same way as pain-
ted parts

Maintenance
Problem Solution
Special dirt, e.g.
pens, nail polish,
dispersion paint,
shoe cream et c.Special st
ain remove: dry with
an absorbent cloth, if applica-
ble
, apply neutral soap solution
afterwards a) a)
Neutral soap solution: two tablespoons maximum in
1 litre of w at

er
Natural leather Problem Solution
Recent dirt Cotton cloth with neutral soap solutiona)
Water-based dirt,
e.g. coff ee

, tea,
blood etc. Recent stains: absorbent cloth
Dry stains: stain r
emover suita-
ble for leather
Grease-based
dirt, e.g. oil , mak

e-
up, etc. Recent stains: absorbent cloth
and suitable st
ain remover for
leather
Dry stains: grease solvent
spray
Special dirt, e.g.
pens, nail polish,
dispersion paint,
shoe cream et c.St

ain remover suitable for
leather
Care Apply pr
eservative cream regu-
larly to pr
otect from sunlight.
Use a colour preservative if re-
quired a)
Neutral soap solution: two tablespoons maximum in
1 litr e of w
at

er Carbon fibre parts Problem Solution
Dirt Clean like plastic parts Take special care with...
Headlights/tail lights