2020 Seat Leon display

Driver assistance systems
instrument cluster for a few seconds. You can
e xt
end or reactivate this warning by pressing
the button  or, depending on your vehicle’s
equipment, by grabbing the steering wheel.
During this time, the vehicle will move off
again if the vehicle in front moves forwards.
To move off when the message ACC ready
to start is not longer displayed, once the
vehicle in front has moved off:

Help with parking and manoeuvring
Trailer mode
The P ark Assist syst
em cannot be switched
on if the factory-fitted towing bracket
››› page 298 is electrically connected to a
trailer.
After changing a wheel
If, after changing a wheel, the vehicle stops
entering and exiting parking spaces correct-
ly, the circumference of the new wheel may
be different and the system may need to
adapt to it. The adaptation is automatic and
takes place during driving. Making turns slow-
ly and in both directions (20 km/h [12 mph])
for a few minutes may contribute to this
adaptation process ››› in Introduction on
page 283.
Selecting a parking type Fig. 197
On the instrument panel display: view
of the parking assist syst em with r

educed view. Fig. 198
On the instrument panel display: indi-
cation of parking modes. Park assist has the following 5 parking types:
Re

verse parallel parking.
Reverse angle parking.
Forward angle parking.
Reverse parallel parking without driving
past first: “Help me”.
Forward parking in a parking bay without
driving past first.
Selecting a parking type after passing in
front of the space
After activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
type. The Park Assist system selects the park-




 ing type automatically. The selected type is
displayed on the instrument clust

er display
››› Fig. 197 and on the infotainment system
display.

Help with parking and manoeuvring
Parking with the parking assist system Fig. 199
On the instrument panel display: paral-
l el parking.  Finding a parking space
.  Park-
ing position.  Manoeuvring. Fig. 200
On the instrument panel display: angle
parking.  Finding a parking space .  P

arking
position.  Manoeuvring. Message to move forwards
Y
our v

ehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar
1 2
3
4
5
6 The necessary conditions have to be met to
park with P
ark Assist
›
›› page 284
and the
parking mode must be selected ››› page 285
.
Parking

Help with parking and manoeuvring
Visual indication segments Fig. 203
Parking aid view on the Infotainment
syst em displ
ay. The optical indication of the segments works
as f
oll

ows:
Grey segments: the obstacle is more
than approx. 30 cm away from the path
or in the direction opposite to travel.
They are also displayed when the elec-
tronic parking brake is activated.
Yellow segments: the obstacles lie on
the vehicle’s path and are at a distance
of less than approx. 30 cm away.
Red segments: obstacles are less than
approx. 30 cm away.
A wake will indicate the anticipated forward
or backward trajectory, depending on the en-
gaged gear. –
–
– If an obstacle is located in the vehicle’s way,
the corresponding audibl

e warning will
sound.
When the penultimate segment is displayed,
the vehicle has reached the collision zone. In
the collision zone, the obstacles are repre-
sented in red (including those out of the
path). Stop the vehicle! ››› in Introduction
on page 290, ››

› in Introduction on
page 290 !
Setting the indications and audio
signal s The indications and acoustic signals are set
in the Inf
ot

ainment system: function button 
> Driver assistance> Parking aid: Setup
Automatic activa-
tion On/off
Front volume* Volume in the front and rear
area.
R

ear volume* Volume in the rear area.
Adjust volume When the parking aid is
s
wit

ched on, the volume of
the audio source will be re-
duced, depending on the se-
lected option. Error messages
If a an error or fault message appears on the
instrument clust
er in P

ark Assist, there is a
fault.
If the fault doesn't disappear before discon-
necting the ignition, it will not be indicated
next time the parking aid is connected.
If a rear sensor is faulty, only the obstacles in
the areas A and
B are displayed
› ›

› Fig. 202. If a front sensor is faulty, only the
obstacles in the areas C and
D will be dis-
pl ayed. Symbol

Help with parking and manoeuvring
Parallel parking Fig. 204
Display on the Infotainment system
scr een.: parking with r
everse assist.Key to the Fig. 204:
Finding a parking space
Go to the sel

ected parking space
Centre the vehicle inside the parking
space
Road
Parking space
Lateral boundary of the parking space
Rear boundary of the parking space



1 2
3
4 Parking

High-voltage battery
Charging process display  V
alid for: hybrid vehicles Fig. 211
Behind the cover of the battery charg-
ing sock et: char
ging process display Fig. 212
On the inside of the cover of the bat-
t ery char

ging socket: sticker with information
on the charging process display. An LED light on the charging socket
› ›

› Fig. 211 (arrow) shows the status of the
charging process.
A sticker on the battery charging cover pro-
vides information on the meaning of the LEDs
››› Fig. 212.
charging process displays:
Green LED ››› Fig. 212
:
Always on: Charge completed success-
fully.
Turn signals: The high-voltage battery is
charging.
1 2 Short flashes: Programmed charging is
activ
e

. The charging process has not yet
started.
Yellow LED ››› Fig. 212
:
Turn signals: The parking lock P has not
been enabled.
Always on: No electrical network has
been detected. Arrange an inspection of
the power supply and network. Seek pro-
fessional assistance.
Red LED ››› Fig. 212
:
Turn signals: Error in the charging system.
The charging process cannot start or has
paused.
Always on: The charging connector has
not been locked. Unplug the charging
connector and plug it back in to the
charging socket, making sure it is proper-
ly inserted. If the problem persists, check
the compatibility of the cable or ask a
professional for help.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation in the
vehicle:
Ignition

High-voltage battery
Charging cable for power sockets  V
alid for: hybrid vehicles Fig. 215
Charging cable for electrical sockets Fig. 216
On the charging cable for power
sock ets: Indicat
or lamps on the protection de-
vice. ›››
Fig. 2
16
:
Indicator lamp of the connector and the
power supply.
Control lamp of the protection device
1 2 Control lamp of the vehicle
F
ailur

e warning lamp
Charging cable information
Before using the charging cable, also follow
the instructions displayed on it and on the
rear of the protective device.
Protection device
The electronic protection device ››› Fig. 216
ensures that the charging connector does
not receive current until it is plugged in to the
vehicle's charging connector.
Self-check
When the charging cable is plugged into the
electrical socket, the protective device auto-
matically performs a self-test. During this
check, all warning and indicator lamps turn
on briefly and go out one after the other.
Upon completion, the operational status at
that time is displayed.
Operating displays
One or more indicator lamps ››› Fig. 216
1 ,
2 or
3 light up green.
3 4 Display

Practical tips
Diesel  V
alid for: vehicles with diesel engines
Pl ease note the information on the inside of
the fuel tank flap.
We recommend you use Diesel according to
standard EN 590.
The diesel can thicken at very low tempera-
tures, thus affecting the start or operation of
the engine. Ask your service station attendant
if their diesel is suitable for winter use.
Water in the fuel filter 1)
If your vehicle has a diesel engine and is
equipped with a fuel filter with a water sep-
arator, the instrument panel may display the
following warning: