2020 Seat Ibiza warning

Instruments and warning/control lamps
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is del et
ed.
Delete journey data presets

Operation
symbols may vary depending on the version
of the instrument panel.
Existing f aults can al
so be checked manually.
To do so, open the menu Vehicle status or
Vehicle
››› page 73
.
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings).

Instruments and warning/control lamps

Instruments and warning/control lamps
switches off due to lack of fuel or an irregu-
l
ar supply ther
eof.

Operation
Things to note
If the v ehicl
e is left parked for a long time im-
mediately after refuelling, the natural gas lev-
el indicator may not accurately indicate the
same level shown after refuelling when the
vehicle is started up again. This is not due to a
leak in the system, but to a drop in pressure in
the gas tank for technical reasons after a
cooling phase just after refuelling. Note
In vehicles with natural gas engines, the
petr ol t

ank fuel level gauge may display
the refuelled amount with a slight delay
(depending on the refuelled amount). Engine coolant temperature indica-
t
or

. Fig. 71
Analogue instrument panel: engine
cool ant t

emperature indicator. Fig. 72
Digital instrument panel: engine cool-
ant t emper

ature indicator. Cool zone. The engine has not r
eached
oper
ating temperature yet. Avoid high
speeds and stressing the engine if it has
not reached operating temperature.
Normal zone. At high outside tempera-
tures and when making the engine work
hard, the diodes may continue lighting up
and reach the upper zone. This is no
cause for concern, provided the control
lamp does not light up 
Warning area. When the engine is work-
ing hard, especially at high outside tem-
peratures, the diodes may light up in the
warning area.
The coolant temperature gauge only works
when the ignition is switched on. A B
C Control and warning lamp

It lights up red

Instruments and warning/control lamps

Instruments and warning/control lamps
Operation using the multifunction
st eering wheel Fig. 73
Right side of the multifunction steering
wheel : butt
ons to the menus and information
displays on the instrument panel. As long as a priority 1
››

› page 75
warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button  of the multifunction
st eering wheel
›

›› Fig. 73
.
Select a menu or an informative display

Operation
Note
If when switching on the ignition warnings
ar e sho
wn about existing faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair. Control lamps
Contr ol and w

arning lampsThe control and warning lamps are indicators
of w
arnings
›

›› , faults or certain functions.
Some contr ol and w
arning lamps come on
when the ignition is switched on, and switch
off when the engine starts running, or while
driving.
Depending on the model, additional text
messages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action ››› page 68, Instrument panel
.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard. Red warning lamps