2020 Seat Ibiza ECU
[x] Cancel search: ECUPage 47 of 406
Page 42 of 90 Report No. : 60404487 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
O MEASUREMENT OF CREEPAGE DISTANCES AND CLEARANCES
N/A
Value of X (mm) ................................ ..................... :
P SAFEGUARDS AGAINST CONDUCTIVE OBJECTS
N/A
P.1 General
N/A
P.2 Safeguards against entry or consequences of entry of a foreign object
N/A
P.2.1 General No opening in accessible
enclosure N/A
P.2.2 Safeguards against entry of a foreign object N/A
Location and Dimensions (mm) ............................ :
P.2.3 Safeguards against the consequences of entry of a
foreign object N/A
P.2.3.1 Safeguard requirements N/A
The ES3 an d PS3 keep - out volume in Figure P.3
not applicable to transportable equipment N/A
Transportable equipment with metalized plastic
parts ................................ ................................ ....... : N/A
P.2.3.2 Consequence of entry test ................................ .... : N/A
P.3 Safeguards against spillage of internal liquids
N/A
P.3.1 Gene ral No internal liquids N/A
P.3.2 Determination of spillage consequences N/A
P.3.3 Spillage safeguards N/A
P.3.4 Compliance N/A
P.4 Metallized coatings and adhesives securing parts
N/A
P.4.1 General No meta l lized coating and
adhesive conducted par ts N/A
P.4.2 Tests N/A
Conditioning, T
C (°C) ................................ ............. :
Duration (weeks) ................................ ................... :
Q CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING
P
Q.1 Limited power sources
P
Q.1.1 Requirements P
a) Inherently limited output N/A
b) Impedance limited ou tput N/A
c) Regulating network limited output P
Page 50 of 406
Page 45 of 90 Report No. : 60404487 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
V.1.1 General N/A
V.1.2 Surfaces and openings tested with jointed test
probes N/A
V.1.3 Openings tested with straight unjointed test probes N/A
V.1.4 Plugs, jacks, connectors tested with blunt probe N/A
V.1.5 Slot openings tested with wedge probe N/A
V.1.6 Terminals tested with rigid test wire N/A
V.2 Accessible part criterion
N/A
X ALTERNATIVE METHOD FOR DETERMINING CLEARANCES FOR INSULATION
IN CIRCUITS CONNECTED TO AN AC MAINS NOT EXCEEDING 420 V PEAK
(300 V RMS) N/A
Clearance ................................ ................................ .. : N/A
Y C ONSTRUCTION REQUIREMENTS FOR OUTDOOR ENCLOSURES
N/A
Y.1 General
N/A
Y.2 Resistance to UV radiation
N/A
Y.3 Resistance to corrosion
N/A
Y.3 Resistance to corrosion
N/A
Y.3.1 Metallic parts of outdoor enclosures are resistant to
effects of water - born e contaminants by ................ : N/A
Y.3.2 Test apparatus N/A
Y.3.3 Water – saturated sulphur dioxide atmosphere N/A
Y.3.4 Test procedure ................................ ....................... : N/A
Y.3.5 Compliance N/A
Y.4 Gaskets
N/A
Y.4.1 General N/A
Y.4.2 Gasket tests N/A
Y.4.3 Tensile strength and elon gation tests N/A
Alternative test methods ................................ ........ : N/A
Y.4.4 Compression test N/A
Y.4.5 Oil resistance N/A
Y.4.6 Securing means N/A
Y.5 Protection of equipment within an outdoor enclosure
N/A
Y.5.1 General N/A
Y.5.2 Protection from moisture N/A
Page 151 of 406
Page 41 of 89 Report No. : 60404488 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
O MEASUREMENT OF CREEPAGE DIST ANCES AND CLEARANCES
N/A
Value of X (mm) ................................ ..................... :
P SAFEGUARDS AGAINST CONDUCTIVE OBJECTS
N/A
P.1 General
N/A
P.2 Safeguards against entry or consequences of entry of a foreign object
N/A
P.2.1 General No opening in accessible
enclosure N/A
P.2.2 Safeg uards against entry of a foreign object N/A
Location and Dimensions (mm) ............................ :
P.2.3 Safeguards against the consequences of entry of a
foreign object N/A
P.2.3.1 Safeguard requirements N/A
The ES3 and PS3 keep - out volume in Figure P.3
not applicab le to transportable equipment N/A
Transportable equipment with metalized plastic
parts ................................ ................................ ....... : N/A
P.2.3.2 Consequence of entry test ................................ .... : N/A
P.3 Safeguards against spillage of internal liquids
N/A
P.3.1 General No internal liquids N/A
P.3.2 Determination of spillage consequences N/A
P.3.3 Spillage safeguards N/A
P.3.4 Compliance N/A
P.4 Metallized coatings and adhesives securing parts
N/A
P.4.1 General No meta l lized coating and
adhesive conducted parts N/A
P.4.2 Tests N/A
Conditioning, T
C (°C) ................................ ............. :
Duration (weeks) ................................ ................... :
Q CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING
P
Q.1 Limited power sources
P
Q.1.1 Requirements P
a) Inherently limited output N/A
b) Impedance limited output N/A
c) Regulating network limited output P
Page 154 of 406
Page 44 of 89 Report No. : 60404488 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
V.1.1 General N/A
V.1.2 Surfaces and opening s tested with jointed test
probes N/A
V.1.3 Openings tested with straight unjointed test probes N/A
V.1.4 Plugs, jacks, connectors tested with blunt probe N/A
V.1.5 Slot openings tested with wedge probe N/A
V.1.6 Terminals tested with rigid test wi re N/A
V.2 Accessible part criterion
N/A
X ALTERNATIVE METHOD FOR DETERMINING CLEARANCES FOR INSULATION
IN CIRCUITS CONNECTED TO AN AC MAINS NOT EXCEEDING 420 V PEAK
(300 V RMS) N/A
Clearance ................................ ................................ .. : N/A
Y CONSTRUCTION REQUIREMENTS FOR OUTDOOR ENCLOSURES
N/A
Y.1 General
N/A
Y.2 Resistance to UV radiation
N/A
Y.3 Resistance to corrosion
N/A
Y.3 Resistance to corrosion
N/A
Y.3.1 Metallic parts of outdoor enclosures are resistant to
effects of water - borne contaminants by ................ : N/A
Y.3.2 Test apparatus N/A
Y.3.3 Water – saturated sulphur dioxide atmosphere N/A
Y.3.4 Test procedure ................................ ....................... : N/A
Y.3.5 Compliance N/A
Y.4 Gaskets
N/A
Y.4.1 General N/A
Y.4.2 Gasket tests N/A
Y.4.3 Tensile strength and elongation tests N/A
Alternative test methods ................................ ........ : N/A
Y.4.4 Compression test N/A
Y.4.5 Oil resistance N/A
Y.4.6 Securing means N/A
Y.5 Protection of equipment within an outdoor enclosure
N/A
Y.5.1 General N/A
Y.5.2 Protection from moisture N/A
Page 253 of 406
Page 40 of 88 Report No. : 60404489 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
O MEASUREMENT OF CREEPAGE DISTANCES AND CLEARANCES
N/A
Value of X (mm) ................................ ..................... :
P SAFEGUARDS AGAINST CONDUCTIVE OBJECTS
N/A
P.1 General
N/A
P.2 Safeguards against entry or consequences of entry of a foreign object
N/A
P.2.1 General No opening in accessible
enclosure N/A
P.2.2 Safeguards agai nst entry of a foreign object N/A
Location and Dimensions (mm) ............................ :
P.2.3 Safeguards against the consequences of entry of a
foreign object N/A
P.2.3.1 Safeguard requirements N/A
The ES3 and PS3 keep - out volume in Figure P.3
not applicable to tran sportable equipment N/A
Transportable equipment with metalized plastic
parts ................................ ................................ ....... : N/A
P.2.3.2 Consequence of entry test ................................ .... : N/A
P.3 Safeguards against spillage of internal liquids
N/A
P.3.1 General No internal liquids N/A
P.3.2 Determination of spilla ge consequences N/A
P.3.3 Spillage safeguards N/A
P.3.4 Compliance N/A
P.4 Metallized coatings and adhesives securing parts
N/A
P.4.1 General No meta l lized coating and
adhesive conducted parts N/A
P.4.2 Tests N/A
Conditioning, T
C (°C) ................................ ............. :
Du ration (weeks) ................................ ................... :
Q CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING
P
Q.1 Limited power sources
P
Q.1.1 Requirements P
a) Inherently limited output N/A
b) Impedance limited output N/A
c) Regulating network limited output P
Page 256 of 406
Page 43 of 88 Report No. : 60404489 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
V.1.1 General N/A
V.1.2 Surfaces and openings tested w ith jointed test
probes N/A
V.1.3 Openings tested with straight unjointed test probes N/A
V.1.4 Plugs, jacks, connectors tested with blunt probe N/A
V.1.5 Slot openings tested with wedge probe N/A
V.1.6 Terminals tested with rigid test wire N/A
V .2 Accessible part criterion
N/A
X ALTERNATIVE METHOD FOR DETERMINING CLEARANCES FOR INSULATION
IN CIRCUITS CONNECTED TO AN AC MAINS NOT EXCEEDING 420 V PEAK
(300 V RMS) N/A
Clearance ................................ ................................ .. : N/A
Y CONSTRUCTION REQUIREMENTS FOR OUTDOOR ENCLOSURES
N/A
Y.1 G eneral
N/A
Y.2 Resistance to UV radiation
N/A
Y.3 Resistance to corrosion
N/A
Y.3 Resistance to corrosion
N/A
Y.3.1 Metallic parts of outdoor enclosures are resistant to
effects of water - borne contaminants by ................ : N/A
Y.3.2 Test apparatus N/A
Y.3.3 Water – saturated sulphur dioxide atmosphere N/A
Y.3.4 Test procedure ................................ ....................... : N/A
Y.3.5 Compliance N/A
Y.4 Gaskets
N/A
Y.4.1 General N/A
Y.4.2 Gasket tests N/A
Y.4.3 Tensile strength and elongation tests N/A
Alternative test methods ................................ ........ : N/A
Y.4.4 Compression test N/A
Y.4.5 Oil resistance N/A
Y.4.6 Securing means N/A
Y.5 Protection of equipment within an outdoor enclosure
N/A
Y.5.1 General N/A
Y.5.2 Protection from moisture N/A
Page 351 of 406
Page 40 of 88 Report No. : 60404490 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
O MEASUREMENT OF CREEPAGE DISTANCES AND CLEARANCES
N/A
Value of X (mm) ................................ ..................... :
P SAFEGUARDS AGAINST CONDUCTIVE OBJECTS
N/A
P.1 General
N/A
P.2 Safeguards against entry or consequences of entry of a foreign object
N/A
P.2.1 General No opening in accessible
enclosure N/A
P.2.2 Safeguards agai nst entry of a foreign object N/A
Location and Dimensions (mm) ............................ :
P.2.3 Safeguards against the consequences of entry of a
foreign object N/A
P.2.3.1 Safeguard requirements N/A
The ES3 and PS3 keep - out volume in Figure P.3
not applicable to tran sportable equipment N/A
Transportable equipment with metalized plastic
parts ................................ ................................ ....... : N/A
P.2.3.2 Consequence of entry test ................................ .... : N/A
P.3 Safeguards against spillage of internal liquids
N/A
P.3.1 General No internal liquids N/A
P.3.2 Determination of spilla ge consequences N/A
P.3.3 Spillage safeguards N/A
P.3.4 Compliance N/A
P.4 Metallized coatings and adhesives securing parts
N/A
P.4.1 General No meta l lized coating and
adhesive conducted parts N/A
P.4.2 Tests N/A
Conditioning, T
C (°C) ................................ ............. :
Du ration (weeks) ................................ ................... :
Q CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING
P
Q.1 Limited power sources
P
Q.1.1 Requirements P
a) Inherently limited output N/A
b) Impedance limited output N/A
c) Regulating network limited output P
Page 354 of 406
Page 43 of 88 Report No. : 60404490 001
IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict
TR F No. IEC62368_1 C
V.1.1 General N/A
V.1.2 Surfaces and openings tested w ith jointed test
probes N/A
V.1.3 Openings tested with straight unjointed test probes N/A
V.1.4 Plugs, jacks, connectors tested with blunt probe N/A
V.1.5 Slot openings tested with wedge probe N/A
V.1.6 Terminals tested with rigid test wire N/A
V .2 Accessible part criterion
N/A
X ALTERNATIVE METHOD FOR DETERMINING CLEARANCES FOR INSULATION
IN CIRCUITS CONNECTED TO AN AC MAINS NOT EXCEEDING 420 V PEAK
(300 V RMS) N/A
Clearance ................................ ................................ .. : N/A
Y CONSTRUCTION REQUIREMENTS FOR OUTDOOR ENCLOSURES
N/A
Y.1 G eneral
N/A
Y.2 Resistance to UV radiation
N/A
Y.3 Resistance to corrosion
N/A
Y.3 Resistance to corrosion
N/A
Y.3.1 Metallic parts of outdoor enclosures are resistant to
effects of water - borne contaminants by ................ : N/A
Y.3.2 Test apparatus N/A
Y.3.3 Water – saturated sulphur dioxide atmosphere N/A
Y.3.4 Test procedure ................................ ....................... : N/A
Y.3.5 Compliance N/A
Y.4 Gaskets
N/A
Y.4.1 General N/A
Y.4.2 Gasket tests N/A
Y.4.3 Tensile strength and elongation tests N/A
Alternative test methods ................................ ........ : N/A
Y.4.4 Compression test N/A
Y.4.5 Oil resistance N/A
Y.4.6 Securing means N/A
Y.5 Protection of equipment within an outdoor enclosure
N/A
Y.5.1 General N/A
Y.5.2 Protection from moisture N/A