2020 Seat Alhambra warning

Emergencies
Start the engine of the vehicle with the
fl at batt
ery and w ait f
or 2 or 3 minut
es
until the engine is running.
Removing the jump leads Before you remove the jump leads,
switch off the dipped beam headlights if
they are switched on.
Turn on the heater blower and heated
rear window in the vehicle with the flat
battery. This helps minimise voltage
peaks which are generated when the
leads are disconnected.
When the engine is running, disconnect
the leads in reverse order to the details
given above.
Make sure the battery clamps have sufficient
metal-to-metal contact with the battery ter-
minals.
If the engine fails to start after about 10 sec-
onds, switch off the starter and try again after
about 1 minute. WARNING

Emergencies
column are deactivated. If the vehicle has
no power supply or there is an el
ectric sys-
t
em fault, the engine must be tow-started
to deactivate the electronic parking brake
and the electronic lock of the steering col-
umn. Towing instructions
Towing requires some expertise and experi-
ence, especially when using a tow r
ope

. Both
drivers should be familiar with the difficulties
involved in towing. For this reason, inexper-
ienced drivers should abstain from towing.
During towing, it should be ensured that no
impermissible tractive forces or shocks are
generated. When towing on an unpaved
road, there is always a risk of overloading and
damaging the anchorage points.
During towing, the towing vehicle can signal
the change of direction even with the hazard
warning lights turned on. To do so, at the
same time, the turn signal lever must be oper-
ated with ignition switched on. Meanwhile, the
hazard warning lights will go off. When the
turn signal lever is returned to the rest posi-
tion, the hazard warning lights will be auto-
matically reactivated. Notes for the driver of the towed vehicle

Instruments and warning/control lamps
Revolutions counter (with the engine
running, in thousands of r e
volutions per
minut e)

Instruments and warning/control lamps
Driving data indicator (multifunc-
tion displ ay)The display of the travel data (multifunction
display) shows differ
ent v
alues about the
journey and the consumption.
Change from one display to another
In vehicles without a multifunction steering
wheel:

Operation
Storing a speed for the speed warning

Instruments and warning/control lamps
central locking button, pull the door handle or
r emo
ve the k
ey fr
om the ignition lock if the
Auto unlock function is enabled.

Instruments and warning/control lamps
button  on the multi function steering
wheel

Instruments and warning/control lamps
and evaluating the information from the cam-
er a, the navigation syst
em and the current
v ehicl
e data, up to three valid road signs are
displayed,