2020 Seat Alhambra display

Introduction
General instructions for use Intr oduction If the setup is changed, this may change the
display on the screen and the Infot
ainment
syst
em may behave in a manner different to
that described in this manual. Note

Introduction
Display and function buttons: operation
and effect

Infotainment System
Function button: operation and effect
2 Press this button to change the keypad
language. Keypad l
anguages can be se-
l
ected from the menu system setup .
3 Displays the number and opens the list of
remaining selectable entries that mat

ch
the entered text.
Letters
and dig-
its Press them to copy them into the input
line.
Letters
with

Introduction
Function button: function
GPS : The time and date can be selected using
the Time zone function button. In this case, the
Time and
Date function buttons for manual
entry will not be active.
Manual : The time and date can be set manual-
ly using the Time and
Date function buttons.
Time : To set the time manually.
Time zone : To adjust the desired time zone.
Time format : To select the time display format (12
or 24 hours).
Date : To set the current date.
Date format : To select the date display format
(DD.MM.YYYY , YY-MM-DD or MM-DD-YY ).
Language : To select the desired language for texts
and phrases in the voice control syst em.
K
eyboard a)
: To select the type (alphabetical or k ey-
boar

d).
Additional keypad languages
a)
: To select additional
keyboard l anguages.
Units : To set the units of measurement of the vehi-
cle

Connectivity
Full Link main menu Fig. 186
Full Link main menu. List of devices : display of connected devi-
ces.
Disconnect : disconnect active connec-
tion.
Settings

Operating modes
Display: Meaning
s a)
DAB not available. a)
This depends on the country and unit in question. Note

Infotainment System
Digital radio mode (DAB, DAB + and
DMB audio)*  Not valid in Japan, China, Mexico, Brazil, Can-
ada or the USA. Fig. 195
DAB Radio mode main menu. Fig. 196
Station information display in DAB ra-
dio mode . The DAB radio tuner supports the DAB, DAB +
and DMB audio tr
ansmission st
andards. In Eur
ope , digital radio is transmitted over
band III frequencies (from 174 MHz t
o 240
MHz).
The frequencies are called “channels” and
have an abbreviation (eg 12 A ).
In a channel, several available DAB stations
are grouped together in an “ensemble”.
Starting the Digital radio mode

Operating modes
When the corresponding FM station has been
f ound,
(FM) is displ ayed behind the name of
the st ation. If the corr
esponding DAB station
becomes available again, it returns to DAB
mode after a while. The (FM) indication dis-
appears.
If the signal is too weak and the DAB station in
question cannot be found again in the FM
band, the radio sound is muted.
Screen Menu
The function buttons refer to the menu that is
displayed when the View  button is pressed