2020 Ram 3500 Chassis Cab steering wheel adjustment

2
INTRODUCTION
HOW TO USE THIS MANUAL ...............................11
Essential Information .................................. 11
Symbols ........................................................ 11
WARNINGS AND CAUTIONS ...............................11
VAN CONVERSIONS/CAMPERS .........................11
VEHICLE MODIFICATIONS/ALTERATIONS .......11
GETTING TO KNOW YOUR VEHICLE
VEHICLE USER GUIDE — IF EQUIPPED ...............12
KEYS ......................................................................13
Key Fob......................................................... 13
IGNITION SWITCH ...............................................17
Keyless Push Button Ignition ...................... 17
REMOTE START — IF EQUIPPED (GASOLINE) ...18
How To Use Remote Start ........................... 18
Remote Start Abort Message ...................... 19
To Enter Remote Start Mode ...................... 19
To Exit Remote Start Mode Without
Driving
The Vehicle .................................................. 19 To Exit Remote Start Mode And Drive The
Vehicle .......................................................... 20 Remote Start Comfort Systems —
If Equipped ................................................... 20 General Information .................................... 20 REMOTE START — IF EQUIPPED (DIESEL)......... 20
How To Use Remote Start ........................... 21
Remote Start Abort Message...................... 21
To Enter Remote Start Mode ...................... 21
To Exit Remote Start Mode Without
Driving The Vehicle ...................................... 22 To Exit Remote Start Mode And Drive The
Vehicle .......................................................... 22 Remote Start Comfort Systems —
If Equipped ................................................... 22
SENTRY KEY.......................................................... 22
Key Programming ....................................... 23
Replacement Keys ..................................... 23
General Information .................................... 23
VEHICLE SECURITY ALARM .............................. 24
To Arm The System ...................................... 24
To Disarm The System ................................ 24
Rearming Of The System............................. 25
Security System Manual Override .............. 25
DOORS .................................................................. 25
Manual Door Locks...................................... 25
Power Door Locks — If Equipped ............... 26
Keyless Enter-N-Go — Passive Entry .......... 26
Automatic Door Locks — If Equipped ....... 29
Child-Protection Door Lock ........................ 29
SEATS ................................................................ 30
Manual Front Seat Adjustment................... 30
Power Driver Seat Adjustment —
If Equipped ................................................... 31 Driver Memory Seats — If Equipped .......... 32
Heated Seats — If Equipped ....................... 34
Ventilated Seats — If Equipped................... 35 HEAD RESTRAINTS ..........................................36
Front Head Restraints ................................. 36
Rear Head Restraint Adjustment ............... 37
Rear Head Restraint Removal .................... 37
STEERING WHEEL .............................................38
Tilt Steering Column .................................. 38
Heated Steering Wheel — If Equipped ...... 38
DRIVER ADJUSTABLE PEDALS —
IF EQUIPPED .........................................................39
MIRRORS ..............................................................40
Inside Day/Night Mirror — If Equipped ...... 40
Automatic Dimming Mirror —
If Equipped .................................................. 40 Automatic Dimming Mirror With Rear View
Camera Display — If Equipped ................... 40 Outside Mirrors ........................................... 41
Driver's Outside Automatic Dimming
Mirror — If Equipped .................................... 41 Power Mirrors — If Equipped ...................... 41
Power Convex Mirror Switch —
If Equipped ................................................... 42 Trailer Towing Mirrors.................................. 42
Heated Mirrors — If Equipped .................... 43
Tilt Side Mirrors In Reverse —
If Equipped ................................................... 43 Outside Mirrors Folding Feature ................. 43
Illuminated Vanity Mirror —
If Equipped ................................................... 44

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 2

GETTING TO KNOW YOUR VEHICLE39
DRIVER ADJUSTABLE PEDALS — IF
EQUIPPED
The adjustable pedals system is designed to
allow a greater range of driver comfort for
steering wheel tilt and seat position. This
feature allows the brake and accelerator pedals
to move toward or away from the driver to
provide improved position with the steering
wheel.
The adjustable pedal switch is located to the left
side of the steering column.

Adjustable Pedals Switch
NOTE:
The pedals can be adjusted with the ignition
OFF.
The pedals cannot be adjusted when the
vehicle is in REVERSE or when the Speed
Control System is on. The following messages
will appear on vehicles equipped with an
instrument cluster display if the pedals are
attempted to be adjusted when the system is
locked out: “Adjustable Pedal Disabled —
Cruise Control Engaged” or “Adjustable Pedal
Disabled — Vehicle In Reverse”.
NOTE:
Always adjust the pedals to a position that
allows full pedal travel.
Further small adjustments may be necessary
to find the best possible seat/pedal position.
For vehicles equipped with Driver Memory
Seat, you can use your remote keyless entry
key fob or the memory switch on the driver’s
door trim panel to return the adjustable
pedals to pre-programmed positions. Refer
to “Driver Memory Seat” in “Seats” in this
chapter for further information.
WARNING!
Do not adjust the pedals while the vehicle is
moving. You could lose control and have an
accident. Always adjust the pedals while the
vehicle is parked.
CAUTION!
Do not place any article under the adjustable
pedals or impede its ability to move, as it may
cause damage to the pedal controls. Pedal
travel may become limited if movement is
stopped by an obstruction in the adjustable
pedal's path.
2

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 39

92GETTING TO KNOW YOUR INSTRUMENT PANEL
INSTRUMENT CLUSTER DISPLAY
Your vehicle will be equipped with an instru-
ment cluster display, which offers useful infor -
mation to the driver. With the ignition in the OFF
mode, opening/closing of a door will activate
the display for viewing, and display the total
miles, or kilometers, in the odometer. Your
instrument cluster display is designed to display
important information about your vehicle’s
systems and features. Using a driver-interactive
display located on the instrument panel, your
instrument cluster display can show you how
systems are working and give you warnings
when they are not. The steering wheel mounted
controls allow you to scroll through the main
menus and submenus. You can access the
specific information you want and make selec -
tions and adjustments.
Instrument Cluster Display Controls
The instrument cluster display features a
driver-interactive display that is located in the
instrument cluster.

Base Instrument Cluster Display
Premium Instrument Cluster Display
The instrument cluster display menu items may
consist of the following:Speedometer
Vehicle Info
Driver Assist — If Equipped
Fuel Economy
Trip
Trailer Tow
Audio
Stored Messages
Screen Set Up
Vehicle Settings — If Equipped
Commercial Settings — If Equipped

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 92

282STARTING AND OPERATING
The trailer and the vehicle’s stop lamps will
come on when braking normally with the vehicle
brake pedal. Only the trailer stop lamps will
come on when the manual brake control lever is
applied.
Trailer Brake Status Indicator Light
This light indicates the trailer electrical connec -
tion status.
If no electrical connection is detected after the
ignition is turned on, pushing the GAIN adjust -
ment button or sliding the manual brake control
lever will display the GAIN setting for 10
seconds and the “Trailer Brake Status Indicator
Light” will not be displayed.
If a fault is detected in the trailer wiring or the
Integrated Trailer Brake Module (ITBM), the
“Trailer Brake Status Indicator Light” will flash.
GAIN Adjustment Buttons (+/-)
Pushing these buttons will adjust the brake
control power output to the trailer brakes in
0.5 increments. The GAIN setting can be
increased to a maximum of 10 or decreased to
a minimum of 0 (no trailer braking).
GAIN
The GAIN setting is used to set the trailer brake
control for the specific towing condition and
should be changed as towing conditions change. Changes to towing conditions include
trailer load, vehicle load, road conditions and
weather.
Adjusting GAIN
NOTE:
This should only be performed in a traffic free
environment at speeds of approximately
20–25 mph (30–40 km/h).

1. Make sure the trailer brakes are in good
working condition, functioning normally
and properly adjusted. See your trailer
dealer if necessary.

2. Hook up the trailer and make the electrical connections according to the trailer manu -
facturer's instructions.
3. When a trailer with electric/EOH brakes is plugged in, the trailer connected message
should appear in the instrument cluster
display (if the connection is not recognized
by the ITBM, braking functions will not be
available), the GAIN setting will illuminate
and the correct type of trailer must be
selected from the instrument cluster display
options. 4. Push the UP or DOWN button on the
steering wheel until “TRAILER TOW”
appears on the screen.
5. Push the RIGHT arrow on the steering wheel to enter “TRAILER TOW”.
6. Push the UP or DOWN buttons until the Trailer Brake Type appears on the screen.
7. Push the RIGHT arrow and then push the UP or DOWN buttons until the proper Trailer
Brake Type appears on the screen.
8. In a traffic-free environment, tow the trailer on a dry, level surface at a speed of
20–25 mph (30–40 km/h) and squeeze
the manual brake control lever completely.
9. If the trailer wheels lockup (indicated by squealing tires), reduce the GAIN setting; if
the trailer wheels turn freely, increase the
GAIN setting.
Repeat steps 8 and 9 until the GAIN setting is at
a point just below trailer wheel lockup. If towing
a heavier trailer, trailer wheel lockup may not be
attainable even with the maximum GAIN setting
of 10.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 282