2020 NISSAN X-TRAIL mirror


> (GLW    0RGHO 7$@
screen fromtheAround ViewMonitor screenwhen:
. The shift lever isin the ªDº (Drive) position (CVT
model) orthe shift lever isout ofthe ªRº (Reverse)
position (MTmodel) ,and thevehicle speed
increases aboveapproximately 10km/h (6MPH) .
. Adifferent screenisselected.
CAMERA AIDINGCORNER SENSOR
FUNCTION (ifequipped)
GUID-0AEEE3 77-4208-4A32-97B6-7 30A3A05647 0
When thecorner ofthe vehicle movesclosertothe
object whiletheAround ViewMonitor isdisplayed, an
indicator isdisplayed andatone issounded bythe
corner sensor function towarn thedriver.
The color ofthe corner sensor indicator andthe
pattern ofthe tone varyaccording tothe distance to
the object.
K eep thecorner sensors (located onthe front andrear
bumper fascia)freefrom snow,ice and large
accumulations ofdirt. Donot clean thesensors with
sharp objects. Ifthe sensors arecovered, theaccuracy
of the corner sensor function willbediminished.
The tone sound andthesensor indicator displaycan
be turn on/off, andthevolume ofthe tone sound and
the sensor detection rangecanbeadjusted. (See
ªDriver Assistanceº (P.2-21) .)
WARNING:
. The corner sensor function isnot designed
to prevent theobject.
. The colors ofthe corner sensor indicator and
the distance guidelinesinthe front/rear
view indicate different distances tothe
object.
. Inclement weathermayaffect thefunction of
the corner sensor system; thismay include reduced
performance orafalse activation.
. This function isdesigned asan aid tothe
driver indetecting largestationary objectsto
help avoid damaging thevehicle. Thesystem
will notdetect smallobjects belowthe
bumper, andmay notdetect objects that
are too close tothe bumper oron the
ground.
. Ifyour vehicle sustains damagetothe
bumper fascia,leaving itmisaligned orbent,
the sensing zonemaybealtered causing
inaccurate measurement ofobstacles or
false alarms.
CAUTION:
Keep theinterior ofthe vehicle asquiet as
possible tohear thetone clearly.
MOVING OBJECTDETECTION (MOD)
FUNCTION (ifequipped)
GUID-6CAFFD 96-0FA6-42CB-8 531-35613FD16A94
The Moving ObjectDetection (MOD)system can
inform thedriver ofmoving objects whendriving outof
garages, maneuvering intoparking lotsand inother
such instances.
The MOD system detects movingobjects byusing
image processing technologyonthe image shown on
the display .The rear view camera isequipped withthe
automatic washerfunction usingwindow washerfluid.
The MOD system operates inthe following conditions
when thecamera viewisdisplayed:
. When theshift lever isin the ªPº (Park) orªNº
(Neutral) position(CVTmodel) orthe shift lever is
out ofthe ªRº (Reverse) position(MTmodel) and
the vehicle isstopped, theMOD system detects
the moving objects inthe bird's-eye view.The MOD
system willnotoperate ifthe outside mirror
is moving inor out orifeither doorisopened.
. When theshift lever isin the ªDº (Drive) position
(CVT model) orthe shift lever isout ofthe ªRº
(Reverse) position(MTmodel) ,and thevehicle
speed isbelow approximately 8km/h (5MPH) ,
the MOD system detects movingobjects inthe
front view.
. When theshift lever isin the ªRº (Reverse)
position andthevehicle speedisbelow approxi-
mately 8km/h (5MPH) ,the MOD system detects
moving objects inthe rear view.The MOD system
will notoperate ifthe back doorisopen.
The MOD system doesnotdetect moving objects in
the front-side view.The MOD iconisnot displayed on
the screen wheninthis view .
WARNING:
. The MOD system isnot asubstitute for
proper vehicle operation anddoes notpre-
vent contact withtheobjects surrounding
the vehicle. Whenmaneuvering, alwaysuse
the outside mirrorandinside rearview mirror
and turn andlook tocheck thesurroundings
to make sureitis safe tomaneuver.
. The system isdeactivated atspeeds above
10 km/h (6MPH) .It is reactivated atlower
speeds.
. The system isnot designed toprevent
contact withallobjects.
. The MOD system isnot designed todetect
surrounding stationaryobjects.
When theMOD system detects amoving object
surrounding thevehicle, theyellow framewillbe
displayed onthe view where theobjects aredetected
Display screen,heaterandairconditioner ,and audio system
4-15
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-0AC29 463-3C0B-4 206-B92B-13B6E4EF1 077
During thefirst 1,600 km(1,000 miles),follow these
recommendations toobtain maximum engineperfor-
mance andensure thefuture reliability andeconomy of
your newvehicle. Failuretofollow theserecommenda-
tions mayresult inshortened enginelifeand reduced
engine performance.
. Donot drive ataconstant speed,eitherfastor
slow ,for long periods oftime.
. Do not runtheengine over4,000 rpm(for
gasoline enginemodels) .
. Donot accelerate atfull throttle inany gear.
. Donot start quickly .
. Donot brake hardasmuch aspossible.
. Donot tow atrailer foratleast thefirst 800 km
(500 miles) (forAustralia, NewZealand, South
Africa andEurope) .
T32A130827-0 90F95DC-E091-4394 -8A6C-A8CC493B8141
WARNING:
The driving characteristic sof your vehicle will
change remarkably byany additional loadand
its distribution, aswell asby adding optional
equipment (trailercoupling, roofracks, etc.).
Y our driving styleandspeed mustbeadjusted
according tothe circumstances. Especiallywhen
carrying heavyloads, yourspeed mustbe
reduced adequately.
. Make surethearea around thevehicle isclear.
. Visually inspecttiresfortheir appearance and
condition. Measureandcheck thetire pressure for
proper inflation.
. Check thatallwindows andlights areclean.
. Adjust theseat andhead restraint positions.
. Adjust theinside andoutside rearview mirror
positions.
. Fasten yourseatbeltandaskallpassengers todo
the same.
. Check thatalldoors areclosed.
. Check theoperation ofthe warning lightswhen
the ignition switchisplaced inthe ªONº position.
. Maintenance itemsinthe ª8.Maintenance anddo-
it-yourselfº sectionshouldbechecked periodi-
cally .
T32A130827- EDC4EF8C-D00C-4C82-AB1C-DA53 C86C7DED
WARNING:
. Never leavechildren oradults whowould
normally requirethesupport ofothers alone
in your vehicle. Petsshould notbeleft alone
either. Theycould unknowingly activate
switches orcontrols andinadvertently be-
come involved inaserious accident and
injure themselves. Onhot, sunny days,
temperatures inaclosed vehicle could
quickly become highenough tocause se-
vere orpossibly fatalillness topeople or
animals.
. Properly secureallluggage tohelp prevent it
from sliding orshifting. Donot place lug-
gage higher thantheseatbacks. Inasudden
stop orcollision, unsecured luggagecould
cause personal injury.
NO TE:
During thefirst fewmonths afterpurchasing a
new vehicle, ifyou smell strong odorsofVolatile
Organic Compounds (VOCs)insidethevehicle,
ventilate thepassenger compartment thor-
oughly. Openallthe windows beforeentering
or while inthe vehicle. Inaddition, whenthe
temperature inthe passenger compartment
rises, orwhen thevehicle isparked indirect
sunlight foraperiod oftime, turnoffthe air
recirculation modeofthe airconditioner and/or
open thewindows toallow sufficient freshair
into thepassenger compartment.
Starting anddriving
5-3
BREAK-IN
SCHEDULE BEFORESTARTING ENGINE PRECAUTI
ONSWHEN STARTING
AND DRIVING
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
steep descent thatengine braking aloneinFour-Wheel
Drive (4WD) modecannot control thespeed.
When driving forward onthe descent, thespeed can
be adjusted bythe brake oraccelerator operation.The
system maintains thespeed forreverse drivingonthe
descent.
HILL DESCENT CONTROL SWITCH
T32A130827- A22A42E7-41B 2-4114-88DB-9E1B7 BDE94E3
JVS0402X
When additional brakingisrequired onsteep downhill
roads, activate thehilldescent controlsystem by
pushing thehilldescent controlswitchon.
When thehilldescent controlsystem isactivated, the
hill descent controlsystem onindicator light
will
illuminate. (SeeªHilldescent controlsystem on
indicator lightº(P.2-18) .)Also, thestop/tail lights
illuminate whilethehilldescent controlsystem is
applying thebrakes tocontrol thevehicle speed.
T o activate thehilldescent controlsystem, satisfyallof
the following conditions:
. Shift thetransmission tothe forward orreverse
gear.
. Turn the4WD mode switch tothe LOCK mode
and drive thevehicle ataspeed under25km/h
(15 MPH) . .
Push thehilldescent controlswitchtothe ªONº
position.
If the accelerator orbrake pedal isdepressed whilethe
hill descent controlsystem ison, the system willstop
operating temporarily .As soon asthe accelerator or
brake pedal isreleased, thehilldescent controlsystem
begins tofunction againifthe hilldescent control
operating conditions arefulfilled.
The hilldescent controlsystem onindicator lightblinks
if the hilldescent controlswitchison and allconditions
for system activation arenot met, orifthe system
becomes disengaged forany reason.
When thevehicle speedexceeds 40km/h (25MPH) ,
the 4WD mode indicator lightchanges fromLOCK to
AUT O.Once thespeed decreases to25 km/h (15
MPH) ,turn the4WD mode switch toLOCK again to
turn onthe hilldescent controlsystem.
T o turn offthe hilldescent controlsystem, pushthehill
descent controlswitchtothe OFF position.
GUID-89 EA2F2C-B11 E-4266-AE54-208D2C5 5EC10
The Blind SpotWarning (BSW) systemhelpsalertthe
driver ofother vehicles inadjacent laneswhen
changing lanes.
The Lane Departure Warning (LDW) system helps
alert thedriver whenthevehicle istraveling closeto
either theleftorthe right ofatraveling
lane.
JVS0390X
The BSW/LDW systemsusetherearview cameraunit
*
1
with automatic washerandblower.
WARNING:
. The BSW system isnot areplacement for
proper driving procedure andisnot de-
signed toprevent contactwithvehicles or
objects. Whenchanging lanes,always use
the side andrear mirrors andturn andlook
in the direction youwillmove toensure itis
safe tochange lanes.Neverrelysolely on
the BSW system.
. The LDW system isonly awarning deviceto
help inform thedriver ofapotential unin-
tended lanedeparture. Itwill notsteer the
vehicle orprevent lossofcontrol. Itis the
driver's responsibility tostay alert, drive
safely, keepthevehicle inthe traveling lane,
Starting anddriving
5-31
BLIND
SPOTWARNING (BSW)/
LANE DEPARTURE WARNING (LDW)
S Y STEMS (ifequipped)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-32
Starting anddriving
and beincontrol ofthe vehicle atall times.
. The camera unitmay notfunction properly
under thefollowing conditions:
Ð When towing atrailer (forAustralia, New
Zealand andSouth Africa).
Ð When strong lightenters thecamera
unit. (Forexample, lightdirectly shines
on the rear ofthe vehicle atsunrise or
sunset.)
Ð When ambient brightness changessud-
denly. (Forexample, whenthevehicle
enters orexits atunnel orpasses under
a bridge.)
. Ifthe camera lensisexcessively dirty,the
automatic washermaynotbeable to
completely cleanthelens. Thiscould result
in the camera notdetecting vehiclesorlane
markers.
. Excessive noise(forexample, audiosystem
volume, openvehicle window) willinterfere
with thechime sound, anditmay notbe
heard.
BSW SYSTEM OPERA TION
GUID-B0752 A1A-BABA-4290-8BA3-3341D61D 39CF
JVS0410X
Blind SpotIndicator light
SSD1029
BSW indicator (inthe Vehicle information display)
The BSW system operates aboveapproximately 32
km/h (20MPH) .
When thecamera unitdetects vehicles inthe detection
zone, theBlind SpotIndicator lightlocated insidethe
outside mirrorswillilluminate. Ifthe turn signal isthen
activated, thesystem chimes (twice)andtheBlind
Spot Indicator lightflashes toalert thedriver.
The Blind SpotIndicator lightcontinues toflash until
the detected vehicle(s) leavethedetection zone.
Detection zone
GUID-279 0FC89-562 5-4979-A03D -DDB0DA0F 2FFF
SSD1026
The camera unitcan detect vehicles oneither sideof
your vehicle whenpartofanother vehicleiswithin the
detection zoneshown asillustrated.
This detection zonetypically startsfromtheoutside
mirror ofyour vehicle andextends approximately 3m
(10 ft)behind therear bumper, andapproximately 3m
(10 ft)sideways.
NO TE:
The Blind SpotIndicator lightwillilluminate for
a few seconds whentheignition switchisplaced
in the ªONº position.
The brightness ofthe Blind SpotIndicator lightsis
adjusted automatically dependingonthe brightness of
the ambient light.
A chime sounds ifthe camera unithasalready
detected vehicleswhenthedriver activates theturn
signal. Ifa vehicle comesintothedetection zoneafter
the driver activates theturn signal, thenonlytheBlind
Spot Indicator lightflashes andnochime sounds. (See
ªBSW driving situationsº (P.5-33) .)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T urning onoroff the BSW system
GUID-49A8 BFB0-B3F3-46 8A-9FCD-7263F12A4EC 8
The BSW system isturned onoroff using thesettings
menu inthe vehicle information display.
S Y STEM ON:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The BSW indicator (white)inthe vehicle information
display willappear.
S Y STEM OFF:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The BSW indicator (white)inthe vehicle information
display willoff.
Perform thefollowing stepstoenable ordisable the
BSW system.
1. Use the
button untilªSettingsº displaysinthe
vehicle information display.Use the
to select
ªDriver Assistanceº .Then press theENTER
button.
2. Select ªDriving Aidsº,and press theENTER
button.
3. To set the BSW system toon oroff, use the
buttons tonavigate inthe menu andusethe
ENTER buttontoselect orchange anitem:
.
Select ªBlindSpotºandpress theENTER
button.
.
T o turn onthe warning, usetheENTER button
to check boxforªWarning (BSW)º
WARNING:
. The camera unitmay notbeable todetect
when certain objects arepresent suchas:
Ð Pedestrians, bicycles,animals
Ð Some typesofsmall vehicles suchas
motorcycles andvery short length vehi-
cles Ð
Oncoming vehicles
Ð Avehicle approaching rapidlyfrombe-
hind. (SeeªBSW driving situationsº (P.5-
33) .)
Ð Avehicle whichyourvehicle overtakes
rapidly. (SeeªBSW driving situationsº
(P .5-33) .)
Ð Avehicle thatmerges orchanges lanes
rapidly directly nexttoyour vehicle.
. The camera unitmay notbeable todetect
properly whenyourvehicle travelsbeside
the middle section ofavehicle withlong
wheelbase (forexample, trailertruck,semi-
trailer, tractor) .
. The camera detection zoneisdesigned
based onastandard lanewidth. When
driving inawider lane,thecamera unit
may notdetect vehicles inan adjacent lane.
When driving inanarrow lane,thecamera
unit may detect vehicles drivingtwolanes
away.
. The camera unitisdesigned toignore most
stationary objects,however objectssuchas
guardrails, walls,foliage andparked vehi-
cles may occasionally bedetected. Thisisa
normal operating condition.
. The camera unitmay detect thereflected
image ofvehicles orroadside objectsthat
are not actually inthe detection zone,
especially whentheroad iswet.
BSW DRIVING SITUATIONS
GUID-FE A5903B-E85 4-4F9C-8E8D-28E430841AEF
Another vehicleapproaching frombehind
GUID-F8 9D0981-52 88-497D-BC24-E907EB 6D9313
SSD1026
The Blind SpotIndicator lightilluminates ifa vehicle
enters thedetection zonefrombehind inan adjacent
lane.
However, ifthe overtaking vehicleistraveling much
faster thanyourvehicle, theindicator lightmaynot
illuminate beforethedetected vehicleisbeside your
vehicle. Alwaysusetheside andrear mirrors andturn
and look inthe direction yourvehicle willmove to
ensure itis safe tochange
lanes.
SSD1031
If the driver activates theturn signal, thentheBlind
Starting anddriving
5-33
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-36
Starting anddriving
. Donot attach ªlicence plateaccessoriesº that
reflect light.
. Donot strike ordamage theareas around the
camera unit.
GUID-A E810235-F6F4 -41E0-95C7-57E6B64668A 9
The Blind SpotWarning (BSW) systemhelpsalertthe
driver ofother vehicles inadjacent laneswhen
changing lanes.
JVS0390X
The BSW system usestherearview cameraunit
*
1
with automatic washerandblower.
WARNING:
. The BSW system isnot areplacement for
proper driving procedure andisnot de-
signed toprevent contactwithvehicles or
objects. Whenchanging lanes,always use
the side andrear mirrors andturn andlook
in the direction youwillmove toensure itis
safe tochange lanes.Neverrelysolely on
the BSW system.
. The camera unitmay notfunction properly
under thefollowing conditions:
Ð When towing atrailer.
Ð When strong lightenters thecamera
unit. (Forexample, lightdirectly shines
on the rear ofthe vehicle atsunrise or
sunset.) Ð
When ambient brightness changessud-
denly. (Forexample, whenthevehicle
enters orexits atunnel orpasses under
a bridge.)
. Ifthe camera lensisexcessively dirty,the
automatic washermaynotbeable to
completely cleanthelens. Thiscould result
in the camera notdetecting vehiclesorlane
markers.
. Excessive noise(forexample, audiosystem
volume, openvehicle window) willinterfere
with thechime sound, anditmay notbe
heard.
BSW SYSTEM OPERA TION
GUID-1BE 5C541-A92F -45FC-8E28-F5276DC1762B
JVS0410X
Blind SpotIndicator light
BLIND SPOTWARNING (BSW)
S Y STEM (ifequipped forEurope)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SSD1029
BSW indicator (inthe Vehicle information display)
The BSW system operates aboveapproximately 32
km/h (20MPH) .
The BSW lightisshown inthe vehicle information
display ifthe Blind SpotWarning system isactive. To
switch thesystem onoroff, see thedescription laterin
this section.
When thecamera unitdetects vehicles inthe detection
zone, theBlind SpotIndicator lightlocated insidethe
outside mirrorswillilluminate. Ifthe turn signal isthen
activated, thesystem chimes (twice)andtheBlind
Spot Indicator lightflashes toalert thedriver.
The Blind SpotIndicator lightcontinues toflash until
the detected vehicle(s) leavethedetection zone.
Detection zone
GUID-2E5 8C740-C1EB -4970-9F18-8 C62C2600F46
SSD1026
The camera unitcan detect vehicles oneither sideof
your vehicle whenpartofanother vehicleiswithin the
detection zoneshown asillustrated.
This detection zonetypically startsfromtheoutside
mirror ofyour vehicle andextends approximately 3m
(10 ft)behind therear bumper, andapproximately 3m
(10 ft)sideways.
The brightness ofthe Blind SpotIndicator lightsis
adjusted automatically dependingonthe brightness of
the ambient light.
A chime sounds ifthe camera unithasalready
detected vehicleswhenthedriver activates theturn
signal. Ifa vehicle comesintothedetection zoneafter
the driver activates theturn signal, thenonlytheBlind
Spot Indicator lightflashes andnochime sounds. (See
ªBSW driving situationsº (P.5-33) .)
T urning onoroff the BSW system
GUID-14F6 DA85-8579-4 2BD-89B5-D01358F25 13E
The BSW system isturned onoroff using thesettings
menu inthe vehicle information display.
S Y STEM ON:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The BSW indicator (white)inthe vehicle information
display willappear.
S Y STEM OFF:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The BSW indicator inthe vehicle information display
will turn off.
Perform thefollowing stepstoenable ordisable the
BSW system.
1. Use the
button untilªSettingsº displaysinthe
vehicle information display.Use the
to select
ªDriver Assistanceº .Then press theENTER
button.
2. Select ªDriving Aidsº,and press theENTER
button.
3. To set the BSW system toon oroff, use the
buttons tonavigate inthe menu andusethe
ENTER buttontoselect ªBlind Spotºandpress
the ENTER button.
WARNING:
. The camera unitmay notbeable todetect
when certain objects arepresent suchas:
Ð Pedestrians, bicycles,animals
Ð Some typesofsmall vehicles suchas
motorcycles andvery short length vehi-
cles
Ð Oncoming vehicles
Ð Avehicle approaching rapidlyfrombe-
hind. (SeeªBSW driving situationsº (P.5-
33) .)
Starting anddriving
5-37
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
5-38
Starting anddriving
Ð Avehicle whichyourvehicle overtakes
rapidly. (SeeªBSW driving situationsº
(P .5-33) .)
Ð Avehicle thatmerges orchanges lanes
rapidly directly nexttoyour vehicle.
. The camera unitmay notbeable todetect
properly whenyourvehicle travelsbeside
the middle section ofavehicle withlong
wheelbase (forexample, trailertruck,semi-
trailer, tractor) .
. The camera detection zoneisdesigned
based onastandard lanewidth. When
driving inawider lane,thecamera unit
may notdetect vehicles inan adjacent lane.
When driving inanarrow lane,thecamera
unit may detect vehicles drivingtwolanes
away.
. The camera unitisdesigned toignore most
stationary objects,however objectssuchas
guardrails, walls,foliage andparked vehi-
cles may occasionally bedetected. Thisisa
normal operating condition.
. The camera unitmay detect thereflected
image ofvehicles orroadside objectsthat
are not actually inthe detection zone,
especially whentheroad iswet.
BSW DRIVING SITUATIONS
GUID-56 B2F3F6-CF DC-4A10-B 36D-98124CD83D96
Another vehicleapproaching frombehind
GUID-913 52549-C58 1-44A5-8079 -C8EA3638803B
SSD1026
The Blind SpotIndicator lightilluminates ifa vehicle
enters thedetection zonefrombehind inan adjacent
lane.
However, ifthe overtaking vehicleistraveling much
faster thanyourvehicle, theindicator lightmaynot
illuminate beforethedetected vehicleisbeside your
vehicle. Alwaysusetheside andrear mirrors andturn
and look inthe direction yourvehicle willmove to
ensure itis safe tochange lanes.
SSD1031
If the driver activates theturn signal, thentheBlind Spot
Indicator lightflashes andachime willsound
twice.
NO TE:
If the driver activates theturn signal before a
vehicle entersthedetection zone,theBlind Spot
Indicator lightwillflash butnochime willsound
when theother vehicle isdetected.
Overtaking othervehicles
GUID-32BB 934C-0EFB-4E88-94D8 -B2B5C81EBD28
SSD1033
The Blind SpotIndicator lightilluminates ifyou
overtake avehicle andthat vehicle staysinthe
detection zoneforapproximately 3seconds.
The camera unitmay notdetect slower moving
vehicles ifthey arepassed quickly.
&RQGLWLRQ
([FHSWIRU&KLQD